cienaCesCfmServiceType
CIENA-CES-CFM-MIB ·
.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.2
Object
column
Enumeration
This object is used to specify the service type.
The meaning of cienaCesCfmServiceValue depends on the value of this MIB object.
This MIB object along with cienaCesCfmServiceValue must be unique for each entry in this table.
Context
- MIB
- CIENA-CES-CFM-MIB
- OID
.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesCfmServiceEntry
- Table
- cienaCesCfmServiceTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | mplsVs |
2 | ethVs |
3 | vlan |
4 | pbtTunnel |
5 | vs |
9 | other |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesCfmServiceIndex A unique identifier for a CFM domain entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.1 |
| cienaCesCfmServiceCCMInterval This MIB object identifies the CCM transmission interval index for the service specified by cienaCesCfmServiceType.
This determines the frequency at which CCMs are… | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.10 |
| cienaCesCfmServiceResetTime This MIB object indicates the time interval during which no service faults can be detected
before the service will reset a fault alarm. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.11 |
| cienaCesCfmServiceLastFaultCCM This MIB object shows the last received CCM fault. | column | CfmDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.12 |
| cienaCesCfmServiceRMEPFailureFlag This MIB object indicates whether the RMEP failure flag is set. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.13 |
| cienaCesCfmServiceCCMErrorFlag This MIB object indicates whether the CCM error flag is set. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.14 |
| cienaCesCfmServiceCrossConnectErrorFlag This MIB object indicates whether the cross-connect error flag is set. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.15 |
| cienaCesCfmServiceNumMEP This MIB object shows the total number of MEPs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.16 |
| cienaCesCfmServiceNumRemoteMEP This MIB object shows the total number of remote MEPs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.17 |
| cienaCesCfmServiceNumActiveMEP This MIB object shows the number of active MEPs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.18 |
| cienaCesCfmServiceNextMepId This MIB object indicates the next MEP ID for the given service. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.19 |
| cienaCesCfmServiceAlarmPriority This MIB object indicates the alarm priority for a given service.
The value ranges from 1 to 5.
The value 1-5 represent the priority according to fau… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.20 |
| cienaCesCfmServiceNumCCMForFault This MIB object indicates the number of CCM frames that must go undelivered
for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.21 |
| cienaCesCfmServiceDMMInterval This MIB object indicates the DMM transmission interval index for the service specified by cienaCesCfmServiceType.
This determines the frequency at which DMMs are … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.22 |
| cienaCesCfmServiceLMMInterval This MIB object indicates the LMM transmission interval index for the service specified by cienaCesCfmServiceType.
This determines the frequency at which LMMs are … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.23 |
| cienaCesCfmServiceCCMLossStatsState This object indicates the operational state of CCM loss accounting
for RMEPs learned by this service type. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.24 |
| cienaCesCfmServiceCCMLossBucketInterval This object indicates the interval in minutes that each of the 96
CCM loss history buckets spans. The default is 15 minutes, which
means the default … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.25 |
| cienaCesCfmServiceY1731 This object indicates whether Y.1731 is enabled for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.26 |
| cienaCesCfmServiceTlvSenderIdType This MIB object indicates the sender ID TLV Type. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.27 |
| cienaCesCfmServiceRMEPHoldTime This MIB object indicates the remote MEP hold time in milliseconds. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.28 |
| cienaCesCfmServiceCCMTxState This MIB object indicates the administrative state of the CCM Tx. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.29 |
| cienaCesCfmServiceValue This object is used to specify the service value.
The meaning of this object depends on the value of cienaCesCfmServiceType.
This MIB object along wi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.3 |
| cienaCesCfmServicePortStatusFlag This MIB object shows the port status defect flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.30 |
| cienaCesCfmServiceRDIFlag This MIB object shows the RDI defect flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.31 |
| cienaCesCfmServiceInstabilityFlag This MIB object shows the instability defect flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.32 |
| cienaCesCfmServiceRMEPAging Controls automatic remote MEP aging for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.33 |
| cienaCesCfmServiceRMEPDiscovery Controls automatic remote MEP discovery for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.34 |
| cienaCesCfmServiceChargedAgainstGlobalBudget This MIB object reflects if this service is charged against
the global frame budget. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.35 |
| cienaCesCfmServiceControlModuleFrameBudget CFM frame budget for the control timing module for the given service. | column | frames/sec SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.36 |
| cienaCesCfmServiceMulticastDa This object indicates if multicast DA mode is enabled for the service. This object is relevant
when the cienaCesCfmServiceType is PBT. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.37 |
| cienaCesCfmServiceCCMRxStats Controls cfm rx debug stats for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.38 |
| cienaCesCfmServiceAdminState This object indicates the administrative state of CFM for this service type. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.4 |
| cienaCesCfmServiceOperState This object indicates the operational state of CFM for this service type. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.5 |
| cienaCesCfmServiceName This MIB object indicates the CFM service name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.6 |
| cienaCesCfmServiceMdLevel This MIB object indicates the maintenance domain level associated with the CFM service. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.7 |
| cienaCesCfmServiceFaultState When this object's state is disabled it suppresses all the corresponding CFM service related
traps. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.8 |
| cienaCesCfmServiceAlarmTime This MIB object indicates the time interval that a service fault detected
by cienaCesCfmServiceType must be present prior to triggering a fault alarm. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ROOMALERT3E-MIBalarmmessage mandatory Last Alarm Message | scalar | OctetString | .1.3.6.1.4.1.20916.1.9.3.1 |