cienaCesCfmServiceTlvSenderIdType
CIENA-CES-CFM-MIB ·
.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.27
Object
column
Enumeration
This MIB object indicates the sender ID TLV Type.
Context
- MIB
- CIENA-CES-CFM-MIB
- OID
.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.27- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesCfmServiceEntry
- Table
- cienaCesCfmServiceTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | chassis |
3 | manage |
4 | chassisManage |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesCfmServiceIndex A unique identifier for a CFM domain entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.1 |
| cienaCesCfmServiceCCMInterval This MIB object identifies the CCM transmission interval index for the service specified by cienaCesCfmServiceType.
This determines the frequency at which CCMs are… | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.10 |
| cienaCesCfmServiceResetTime This MIB object indicates the time interval during which no service faults can be detected
before the service will reset a fault alarm. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.11 |
| cienaCesCfmServiceLastFaultCCM This MIB object shows the last received CCM fault. | column | CfmDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.12 |
| cienaCesCfmServiceRMEPFailureFlag This MIB object indicates whether the RMEP failure flag is set. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.13 |
| cienaCesCfmServiceCCMErrorFlag This MIB object indicates whether the CCM error flag is set. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.14 |
| cienaCesCfmServiceCrossConnectErrorFlag This MIB object indicates whether the cross-connect error flag is set. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.15 |
| cienaCesCfmServiceNumMEP This MIB object shows the total number of MEPs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.16 |
| cienaCesCfmServiceNumRemoteMEP This MIB object shows the total number of remote MEPs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.17 |
| cienaCesCfmServiceNumActiveMEP This MIB object shows the number of active MEPs. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.18 |
| cienaCesCfmServiceNextMepId This MIB object indicates the next MEP ID for the given service. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.19 |
| cienaCesCfmServiceType This object is used to specify the service type.
The meaning of cienaCesCfmServiceValue depends on the value of this MIB object.
This MIB object alon… | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.2 |
| cienaCesCfmServiceAlarmPriority This MIB object indicates the alarm priority for a given service.
The value ranges from 1 to 5.
The value 1-5 represent the priority according to fau… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.20 |
| cienaCesCfmServiceNumCCMForFault This MIB object indicates the number of CCM frames that must go undelivered
for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down.
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.21 |
| cienaCesCfmServiceDMMInterval This MIB object indicates the DMM transmission interval index for the service specified by cienaCesCfmServiceType.
This determines the frequency at which DMMs are … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.22 |
| cienaCesCfmServiceLMMInterval This MIB object indicates the LMM transmission interval index for the service specified by cienaCesCfmServiceType.
This determines the frequency at which LMMs are … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.23 |
| cienaCesCfmServiceCCMLossStatsState This object indicates the operational state of CCM loss accounting
for RMEPs learned by this service type. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.24 |
| cienaCesCfmServiceCCMLossBucketInterval This object indicates the interval in minutes that each of the 96
CCM loss history buckets spans. The default is 15 minutes, which
means the default … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.25 |
| cienaCesCfmServiceY1731 This object indicates whether Y.1731 is enabled for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.26 |
| cienaCesCfmServiceRMEPHoldTime This MIB object indicates the remote MEP hold time in milliseconds. | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.28 |
| cienaCesCfmServiceCCMTxState This MIB object indicates the administrative state of the CCM Tx. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.29 |
| cienaCesCfmServiceValue This object is used to specify the service value.
The meaning of this object depends on the value of cienaCesCfmServiceType.
This MIB object along wi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.3 |
| cienaCesCfmServicePortStatusFlag This MIB object shows the port status defect flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.30 |
| cienaCesCfmServiceRDIFlag This MIB object shows the RDI defect flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.31 |
| cienaCesCfmServiceInstabilityFlag This MIB object shows the instability defect flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.32 |
| cienaCesCfmServiceRMEPAging Controls automatic remote MEP aging for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.33 |
| cienaCesCfmServiceRMEPDiscovery Controls automatic remote MEP discovery for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.34 |
| cienaCesCfmServiceChargedAgainstGlobalBudget This MIB object reflects if this service is charged against
the global frame budget. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.35 |
| cienaCesCfmServiceControlModuleFrameBudget CFM frame budget for the control timing module for the given service. | column | frames/sec SNMPv2-SMICounter32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.36 |
| cienaCesCfmServiceMulticastDa This object indicates if multicast DA mode is enabled for the service. This object is relevant
when the cienaCesCfmServiceType is PBT. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.37 |
| cienaCesCfmServiceCCMRxStats Controls cfm rx debug stats for the service. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.38 |
| cienaCesCfmServiceAdminState This object indicates the administrative state of CFM for this service type. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.4 |
| cienaCesCfmServiceOperState This object indicates the operational state of CFM for this service type. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.5 |
| cienaCesCfmServiceName This MIB object indicates the CFM service name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.6 |
| cienaCesCfmServiceMdLevel This MIB object indicates the maintenance domain level associated with the CFM service. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.7 |
| cienaCesCfmServiceFaultState When this object's state is disabled it suppresses all the corresponding CFM service related
traps. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.8 |
| cienaCesCfmServiceAlarmTime This MIB object indicates the time interval that a service fault detected
by cienaCesCfmServiceType must be present prior to triggering a fault alarm. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.9 |