cienaCesCfmServiceOperState

CIENA-CES-CFM-MIB · .1.3.6.1.4.1.1271.2.1.4.1.2.1.1.5
MIB view Table view

Object

column CIENA-TCCienaGlobalState 
This object indicates the operational state of CFM for this service type.

Context

MIB
CIENA-CES-CFM-MIB
OID
.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.5
Type
column
Access
readonly
Status
current
Parent
cienaCesCfmServiceEntry
Table
cienaCesCfmServiceTable
Siblings
37

Syntax

CIENA-TCCienaGlobalState
Source
CIENA-TCCienaGlobalState
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesCfmServiceIndex
A unique identifier for a CFM domain entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.1
cienaCesCfmServiceCCMInterval
This MIB object identifies the CCM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which CCMs are…
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.10
cienaCesCfmServiceResetTime
This MIB object indicates the time interval during which no service faults can be detected before the service will reset a fault alarm.
columnmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.11
cienaCesCfmServiceLastFaultCCM
This MIB object shows the last received CCM fault.
columnCfmDisplayString.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.12
cienaCesCfmServiceRMEPFailureFlag
This MIB object indicates whether the RMEP failure flag is set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.13
cienaCesCfmServiceCCMErrorFlag
This MIB object indicates whether the CCM error flag is set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.14
cienaCesCfmServiceCrossConnectErrorFlag
This MIB object indicates whether the cross-connect error flag is set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.15
cienaCesCfmServiceNumMEP
This MIB object shows the total number of MEPs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.16
cienaCesCfmServiceNumRemoteMEP
This MIB object shows the total number of remote MEPs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.17
cienaCesCfmServiceNumActiveMEP
This MIB object shows the number of active MEPs.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.18
cienaCesCfmServiceNextMepId
This MIB object indicates the next MEP ID for the given service.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.19
cienaCesCfmServiceType
This object is used to specify the service type. The meaning of cienaCesCfmServiceValue depends on the value of this MIB object. This MIB object alon…
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.2
cienaCesCfmServiceAlarmPriority
This MIB object indicates the alarm priority for a given service. The value ranges from 1 to 5. The value 1-5 represent the priority according to fau…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.20
cienaCesCfmServiceNumCCMForFault
This MIB object indicates the number of CCM frames that must go undelivered for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down. …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.21
cienaCesCfmServiceDMMInterval
This MIB object indicates the DMM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which DMMs are …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.22
cienaCesCfmServiceLMMInterval
This MIB object indicates the LMM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which LMMs are …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.23
cienaCesCfmServiceCCMLossStatsState
This object indicates the operational state of CCM loss accounting for RMEPs learned by this service type.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.24
cienaCesCfmServiceCCMLossBucketInterval
This object indicates the interval in minutes that each of the 96 CCM loss history buckets spans. The default is 15 minutes, which means the default …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.25
cienaCesCfmServiceY1731
This object indicates whether Y.1731 is enabled for the service.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.26
cienaCesCfmServiceTlvSenderIdType
This MIB object indicates the sender ID TLV Type.
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.27
cienaCesCfmServiceRMEPHoldTime
This MIB object indicates the remote MEP hold time in milliseconds.
columnmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.28
cienaCesCfmServiceCCMTxState
This MIB object indicates the administrative state of the CCM Tx.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.29
cienaCesCfmServiceValue
This object is used to specify the service value. The meaning of this object depends on the value of cienaCesCfmServiceType. This MIB object along wi…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.3
cienaCesCfmServicePortStatusFlag
This MIB object shows the port status defect flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.30
cienaCesCfmServiceRDIFlag
This MIB object shows the RDI defect flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.31
cienaCesCfmServiceInstabilityFlag
This MIB object shows the instability defect flag.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.32
cienaCesCfmServiceRMEPAging
Controls automatic remote MEP aging for the service.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.33
cienaCesCfmServiceRMEPDiscovery
Controls automatic remote MEP discovery for the service.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.34
cienaCesCfmServiceChargedAgainstGlobalBudget
This MIB object reflects if this service is charged against the global frame budget.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.35
cienaCesCfmServiceControlModuleFrameBudget
CFM frame budget for the control timing module for the given service.
columnframes/sec SNMPv2-SMICounter32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.36
cienaCesCfmServiceMulticastDa
This object indicates if multicast DA mode is enabled for the service. This object is relevant when the cienaCesCfmServiceType is PBT.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.37
cienaCesCfmServiceCCMRxStats
Controls cfm rx debug stats for the service.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.38
cienaCesCfmServiceAdminState
This object indicates the administrative state of CFM for this service type.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.4
cienaCesCfmServiceName
This MIB object indicates the CFM service name.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.6
cienaCesCfmServiceMdLevel
This MIB object indicates the maintenance domain level associated with the CFM service.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.7
cienaCesCfmServiceFaultState
When this object's state is disabled it suppresses all the corresponding CFM service related traps.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.8
cienaCesCfmServiceAlarmTime
This MIB object indicates the time interval that a service fault detected by cienaCesCfmServiceType must be present prior to triggering a fault alarm.
columnmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.2.1.1.9