cienaCesCfmMEPOperState
CIENA-CES-CFM-MIB ·
.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4
Object
column
CIENA-TCCienaGlobalState
This object is used to specify the operational state of the CFM MEP.
Context
- MIB
- CIENA-CES-CFM-MIB
- OID
.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cienaCesCfmMEPEntry
- Table
- cienaCesCfmMEPTable
- Siblings
- 21
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesCfmMEPId This MIB object is used as the index in the table and indicates
the MEP ID for the given service. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.1 |
| cienaCesCfmMEPLiIndex This object indicates the logical interface index for creating the MEP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.10 |
| cienaCesCfmMEPServiceName This object is used to specify the service name assigned to this port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.11 |
| cienaCesCfmMEPSubPortName This object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.12 |
| cienaCesCfmMEPVsPbtName This object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.13 |
| cienaCesCfmMEPLogicalPortName This object indicates the logical port name assigned to the given service and port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.14 |
| cienaCesCfmMEPSubPortIndex This object is used to specify the CFM sub-port index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.15 |
| cienaCesCfmMEPEncapsulation This object is used to specify the encapsulation applied to the service and port. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16 |
| cienaCesCfmMEPLeadPortSlotIndex This object is used as to specify the agent slot that the MEP is in. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.17 |
| cienaCesCfmMEPPBTBvid This object indicates the BVID assigned to the given service and port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.18 |
| cienaCesCfmMEPPBTEtype This object indicates the Ethertype assigned to the given service and port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.19 |
| cienaCesCfmMEPMacAddr This object indicates the MAC address received on the
given service and MEP ID. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.2 |
| cienaCesCfmMEPL2XformType This object indicates the type of MEP L2 transform.
no-op(1) type indicates that there is no MEP level transform.
auto(2) type indicates that the MEP inherits the sub-port vtag-st… | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.20 |
| cienaCesCfmMEPSignalDegradeMonitoringStatus This object enables/disables signal degrading monitoring on the mep. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.21 |
| cienaCesCfmMEPSignalDegradeTriggerMode This object sets the signal degrade trigger mode on the mep.
nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold
and ci… | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.22 |
| cienaCesCfmMEPAdminState This object is used to specify the administrative state of the CFM MEP. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.3 |
| cienaCesCfmMEPDirection This object is used to specify the MEP direction of the service. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.5 |
| cienaCesCfmMEPCCMState This object indicates the CCM transmission for the service specified by cienaCesCfmServiceType. | column | CIENA-TCCienaGlobalState | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.6 |
| cienaCesCfmMEPCCMPriority This object indicates the priority of CCM messages transmitted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.7 |
| cienaCesCfmMEPLTMPriority This object indicates the priority received on the given service and port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8 |
| cienaCesCfmMEPLiType This object indicates the logical interface type on which the MEP is created. | column | Enumeration | .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.9 |