cienaCesCfmMEPLTMPriority

CIENA-CES-CFM-MIB · .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8
MIB view Table view

Object

column SNMPv2-SMIInteger32 
This object indicates the priority received on the given service and port.

Context

MIB
CIENA-CES-CFM-MIB
OID
.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8
Type
column
Access
readonly
Status
current
Parent
cienaCesCfmMEPEntry
Table
cienaCesCfmMEPTable
Siblings
21

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesCfmMEPId
This MIB object is used as the index in the table and indicates the MEP ID for the given service.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.1
cienaCesCfmMEPLiIndex
This object indicates the logical interface index for creating the MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.10
cienaCesCfmMEPServiceName
This object is used to specify the service name assigned to this port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.11
cienaCesCfmMEPSubPortName
This object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.12
cienaCesCfmMEPVsPbtName
This object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.13
cienaCesCfmMEPLogicalPortName
This object indicates the logical port name assigned to the given service and port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.14
cienaCesCfmMEPSubPortIndex
This object is used to specify the CFM sub-port index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.15
cienaCesCfmMEPEncapsulation
This object is used to specify the encapsulation applied to the service and port.
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16
cienaCesCfmMEPLeadPortSlotIndex
This object is used as to specify the agent slot that the MEP is in.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.17
cienaCesCfmMEPPBTBvid
This object indicates the BVID assigned to the given service and port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.18
cienaCesCfmMEPPBTEtype
This object indicates the Ethertype assigned to the given service and port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.19
cienaCesCfmMEPMacAddr
This object indicates the MAC address received on the given service and MEP ID.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.2
cienaCesCfmMEPL2XformType
This object indicates the type of MEP L2 transform. no-op(1) type indicates that there is no MEP level transform. auto(2) type indicates that the MEP inherits the sub-port vtag-st…
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.20
cienaCesCfmMEPSignalDegradeMonitoringStatus
This object enables/disables signal degrading monitoring on the mep.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.21
cienaCesCfmMEPSignalDegradeTriggerMode
This object sets the signal degrade trigger mode on the mep. nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold and ci…
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.22
cienaCesCfmMEPAdminState
This object is used to specify the administrative state of the CFM MEP.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.3
cienaCesCfmMEPOperState
This object is used to specify the operational state of the CFM MEP.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4
cienaCesCfmMEPDirection
This object is used to specify the MEP direction of the service.
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.5
cienaCesCfmMEPCCMState
This object indicates the CCM transmission for the service specified by cienaCesCfmServiceType.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.6
cienaCesCfmMEPCCMPriority
This object indicates the priority of CCM messages transmitted.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.7
cienaCesCfmMEPLiType
This object indicates the logical interface type on which the MEP is created.
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.9