cienaCesCfmMEPEncapsulation

CIENA-CES-CFM-MIB · .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16
MIB view Table view

Object

column Enumeration 
This object is used to specify the encapsulation applied to the service and port.

Context

MIB
CIENA-CES-CFM-MIB
OID
.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16
Type
column
Access
readonly
Status
current
Parent
cienaCesCfmMEPEntry
Table
cienaCesCfmMEPTable
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ieee802dot1d
2pbtCfmEncap

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cienaCesCfmMEPId
This MIB object is used as the index in the table and indicates the MEP ID for the given service.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.1
cienaCesCfmMEPLiIndex
This object indicates the logical interface index for creating the MEP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.10
cienaCesCfmMEPServiceName
This object is used to specify the service name assigned to this port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.11
cienaCesCfmMEPSubPortName
This object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.12
cienaCesCfmMEPVsPbtName
This object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.13
cienaCesCfmMEPLogicalPortName
This object indicates the logical port name assigned to the given service and port.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.14
cienaCesCfmMEPSubPortIndex
This object is used to specify the CFM sub-port index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.15
cienaCesCfmMEPLeadPortSlotIndex
This object is used as to specify the agent slot that the MEP is in.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.17
cienaCesCfmMEPPBTBvid
This object indicates the BVID assigned to the given service and port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.18
cienaCesCfmMEPPBTEtype
This object indicates the Ethertype assigned to the given service and port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.19
cienaCesCfmMEPMacAddr
This object indicates the MAC address received on the given service and MEP ID.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.2
cienaCesCfmMEPL2XformType
This object indicates the type of MEP L2 transform. no-op(1) type indicates that there is no MEP level transform. auto(2) type indicates that the MEP inherits the sub-port vtag-st…
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.20
cienaCesCfmMEPSignalDegradeMonitoringStatus
This object enables/disables signal degrading monitoring on the mep.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.21
cienaCesCfmMEPSignalDegradeTriggerMode
This object sets the signal degrade trigger mode on the mep. nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold and ci…
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.22
cienaCesCfmMEPAdminState
This object is used to specify the administrative state of the CFM MEP.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.3
cienaCesCfmMEPOperState
This object is used to specify the operational state of the CFM MEP.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4
cienaCesCfmMEPDirection
This object is used to specify the MEP direction of the service.
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.5
cienaCesCfmMEPCCMState
This object indicates the CCM transmission for the service specified by cienaCesCfmServiceType.
columnCIENA-TCCienaGlobalState.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.6
cienaCesCfmMEPCCMPriority
This object indicates the priority of CCM messages transmitted.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.7
cienaCesCfmMEPLTMPriority
This object indicates the priority received on the given service and port.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8
cienaCesCfmMEPLiType
This object indicates the logical interface type on which the MEP is created.
columnEnumeration.1.3.6.1.4.1.1271.2.1.4.1.3.1.1.9