cie1000IpmcSnoopingConfigIgmpIfQi
CIE1000-IPMC-SNOOPING-MIB ·
.1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.8
Object
This setting Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.2.
Context
- MIB
- CIE1000-IPMC-SNOOPING-MIB
- OID
.1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cie1000IpmcSnoopingConfigIgmpIfEntry
- Table
- cie1000IpmcSnoopingConfigIgmpIfTable
- Siblings
- 11
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cie1000IpmcSnoopingConfigIgmpIfIfIndex Logical interface number of the VLAN interface. | column | CIE1000-TCCIE1000InterfaceIndex | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.1 |
| cie1000IpmcSnoopingConfigIgmpIfLmqi This setting Last Member Query Interval is used to control IGMP
protocol stack as stated in RFC-3376 8.8. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.10 |
| cie1000IpmcSnoopingConfigIgmpIfAction Action | column | CIE1000-TCCIE1000RowEditorState | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.100 |
| cie1000IpmcSnoopingConfigIgmpIfUri This setting Unsolicited Report Interval is used to control IGMP
protocol stack as stated in RFC-3376 8.11. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.11 |
| cie1000IpmcSnoopingConfigIgmpIfAdminState Enable/Disable the IGMP snooping per-VLAN functionality. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.2 |
| cie1000IpmcSnoopingConfigIgmpIfQuerierElection Enable/Disable the capability to run IGMP Querier election per-VLAN
basis. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.3 |
| cie1000IpmcSnoopingConfigIgmpIfQuerierAddress The static IPv4 source address of the specific IGMP interface for
seding IGMP Query message with respect to IGMP Querier election. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.4 |
| cie1000IpmcSnoopingConfigIgmpIfCompatibility The compatibility control for IGMP snooping to run the corresponding
protocol version. | column | CIE1000IpmcSnoopingIgmpInterfaceCompatibilityEnum | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.5 |
| cie1000IpmcSnoopingConfigIgmpIfPriority This setting is used for prioritizing the IGMP control frames to be
sent for IGMP snooping. | column | CIE1000-TCCIE1000Unsigned8 | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.6 |
| cie1000IpmcSnoopingConfigIgmpIfRv This setting Robustness Variable is used to control IGMP protocol stack
as stated in RFC-3376 8.1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.7 |
| cie1000IpmcSnoopingConfigIgmpIfQri This setting Query Response Intervalis used to control IGMP protocol
stack as stated in RFC-3376 8.3. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.9 |