cMsDwdmIfConfigDataRate
CERENT-MSDWDM-MIB ·
.1.3.6.1.4.1.3607.2.40.1.1.1.2
Object
column
r/w
Enumeration
This object allows the management client to set the
data rate across the interface.
passThru denotes 2R, Reamplification and reshaping.
stm1 denotes 3R, Reamp, reshaping and reclocking.
stm4 denotes 3R, Reamp, reshaping and reclocking.
stm16 denotes 3R, Reamp, reshaping and reclocking.
stm64 denotes 3R, Reamp, reshaping and reclocking.
gigE denotes 3R, Reamp, reshaping and reclocking.
tenGigE denotes 3R, Reamp, reshaping and reclocking.
fc denotes 3R, Reamp, reshaping and reclocking.
oneGfcFicon denotes 3R, Reamp, reshaping and reclocking.
twoGfcFiconIsc3 denotes 3R, Reamp, reshaping and reclocking.
escon denotes 2R, Reamp and reshaping.
dv6000 denotes 2R, Reamp and reshaping.
sdiD1Video denotes 2R, Reamp and reshaping.
hdtv denotes 2R, Reamp and reshaping.
oc3 denotes 3R, Reamp, reshaping and reclocking.
oc12 denotes 3R, Reamp, reshaping and reclocking.
oc48 denotes 3R, Reamp, reshaping and reclocking.
oc192 denotes 3R, Reamp, reshaping and reclocking.
infiniBand denotes 3R, Reamp, reshaping and reclocking.
fe denotes 3R, Reamp, reshaping and reclocking.
e3t3 denotes 3R, Reamp, reshaping and reclocking.
oc3Ge denotes 3R, Reamp, reshaping and reclocking.
Context
- MIB
- CERENT-MSDWDM-MIB
- OID
.1.3.6.1.4.1.3607.2.40.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cMsDwdmIfConfigEntry
- Table
- cMsDwdmIfConfigTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
10 | passThru |
20 | stm1 |
30 | stm4 |
40 | stm16 |
50 | stm64 |
55 | stm256 |
60 | gigE |
70 | tenGigE |
80 | fc |
90 | oneGfcFicon |
100 | twoGfcFiconIsc3 |
110 | escon |
120 | dv6000 |
130 | sdiD1Video |
140 | hdtv |
150 | oc3 |
160 | oc12 |
170 | oc48 |
180 | oc192 |
190 | fourGfcFicon |
200 | tenGfc |
210 | isc1 |
220 | isc3 |
230 | oneGigIsc3 |
240 | twoGigIsc3 |
250 | etrClo |
280 | infiniBand |
290 | fe |
300 | e1t1 |
310 | e3t3 |
320 | oc3Ge |
330 | eightGfc |
340 | oc768 |
350 | otu1 |
360 | otu2 |
370 | otu3 |
380 | otu4 |
390 | oneHundredGe |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cMsDwdmIfConfigProtocol This object is used to specify the protocol of the data
carried over the interface.
This object applies to linecards which support a variety of
protocols and allo… | column | ProtocolType | .1.3.6.1.4.1.3607.2.40.1.1.1.1 |
| cMsDwdmIfConfigFECMode This object allows the management client to enable
gathering FEC ( Forward Error Correction ) counters on
an applicable interface, by writing a value of 'enableStandard'
or 'e… | column | Enumeration | .1.3.6.1.4.1.3607.2.40.1.1.1.10 |
| cMsDwdmIfConfigLoopback This object allows the management client to configure
loopback for the client side or trunk side interfaces.
'noLoop' - No Loopback present.
'diagnosticLoo… | column | Enumeration | .1.3.6.1.4.1.3607.2.40.1.1.1.3 |
| cMsDwdmIfConfigWavelength This object allows the management client to configure
the wavelength mode of operation to the applicable interfaces. | column | OpticalWavelength | .1.3.6.1.4.1.3607.2.40.1.1.1.4 |
| cMsDwdmIfConfigOtnStatus This object allows the management client to enable
the OTN (G.709) on an applicable interface,by writing a
value of 'true' to this object. To bypass the monitoring
hardware, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3607.2.40.1.1.1.5 |
| cMsDwdmIfConfigFECStatus This object allows the management client to enable
gathering FEC ( Forward Error Correction ) counters on
an applicable interface, by writing a value of 'true'
to this object.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3607.2.40.1.1.1.6 |
| cMsDwdmIfOpticsValidIntervals This object gives the number of contiguous 15 minute
intervals for which valid Optical Monitor PM data is available
for the particular interface.
The value of this… | column | Unsigned32 | .1.3.6.1.4.1.3607.2.40.1.1.1.7 |
| cMsDwdmIfOTNValidIntervals This object gives the number of contiguous 15 minute
intervals for which valid OTN performance monitoring data is
available for the particular interface.
The valu… | column | Unsigned32 | .1.3.6.1.4.1.3607.2.40.1.1.1.8 |
| cMsDwdmIfFECValidIntervals This object gives the number of contiguous 15 minute
intervals for which valid FEC PM data is available
for the particular interface.
The value of this object wil… | column | Unsigned32 | .1.3.6.1.4.1.3607.2.40.1.1.1.9 |