atiSaveConfiguration
CENTRECOM-SYSTEM-MIB ·
.1.3.6.1.4.1.207.8.12.2.3.3
Object
scalar
r/w
Enumeration
When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the atiSaveStatus object to determine when the asynchronous save operation has completed.
Context
- MIB
- CENTRECOM-SYSTEM-MIB
- OID
.1.3.6.1.4.1.207.8.12.2.3.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- atiSwitchSystem
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | saveToPrimary |
2 | saveToSecondary |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atiPrimaryPowerOperational Operational status of internal power supply of a device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.12.2.3.10 |
| atiRedundantPowerStatus Operational status of an external redundant power supply to a device. | scalar | Enumeration | .1.3.6.1.4.1.207.8.12.2.3.11 |
| atiRedundantPowerAlarm Alarm state of an external redundant power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.12.2.3.12 |
| atiPrimarySoftwareRev The software revision of the primary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be repo… | scalar | OctetString | .1.3.6.1.4.1.207.8.12.2.3.13 |
| atiSecondarySoftwareRev The software revision of the secondary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be re… | scalar | OctetString | .1.3.6.1.4.1.207.8.12.2.3.14 |
| atiImageToUseOnReboot Controls which image will be used
on next reboot. | scalar | Enumeration | .1.3.6.1.4.1.207.8.12.2.3.15 |
| atiSystemID This represents the System ID of the Switch. | scalar | OctetString | .1.3.6.1.4.1.207.8.12.2.3.16 |
| atiSystemBoardID This represents the Board ID of the Switch. | scalar | OctetString | .1.3.6.1.4.1.207.8.12.2.3.17 |
| atiSystemLeftBoardID This represents the Left Board ID of the Summit Switch. | scalar | OctetString | .1.3.6.1.4.1.207.8.12.2.3.18 |
| atiSystemRightBoardID This represents the Right Board ID of the Summit Switch. | scalar | OctetString | .1.3.6.1.4.1.207.8.12.2.3.19 |
| atiSaveStatus This object will return the status of a save operation invoked
by setting the atiSaveConfiguration object. A network
management application can read this object to determine that… | scalar | Enumeration | .1.3.6.1.4.1.207.8.12.2.3.4 |
| atiCurrentConfigInUse Shows which NVRAM configuration store was used at last boot | scalar | Enumeration | .1.3.6.1.4.1.207.8.12.2.3.5 |
| atiConfigToUseOnReboot Controls which NVRAM configuration store will be used on next reboot. | scalar | Enumeration | .1.3.6.1.4.1.207.8.12.2.3.6 |
| atiOverTemperatureAlarm Alarm status of overtemperature sensor in device
enclosure. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.207.8.12.2.3.7 |
| atiCurrentTemperature Current temperature in degrees celcius measured inside
device enclosure. | scalar | Integer32 | .1.3.6.1.4.1.207.8.12.2.3.8 |
| atiFanStatusTable Table of operational status of all internal cooling fans. | table | - | .1.3.6.1.4.1.207.8.12.2.3.9 |