cat2600TsPortBeaconNAUN
CAT2600-MIB ·
.1.3.6.1.4.1.9.1.111.1.2.2.1.1.34
Object
column
mandatory
MacAddr
MAC address of the NAUN station last generating a beacon MAC frame.
This information is present for the generation of a trap and
should not be used to represent the health of the ring.
Context
- MIB
- CAT2600-MIB
- OID
.1.3.6.1.4.1.9.1.111.1.2.2.1.1.34- Type
- column
- Access
- noaccess
- Status
- mandatory
- Parent
- cat2600TsPortEntry
- Table
- cat2600TsPortTable
- Siblings
- 34
Syntax
MacAddr
- Source
- MacAddr
- Base type
OctetString
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cat2600TsPortIndex mandatory The ifIndex value corresponding to each port entry. For TR
interfaces, the TsPortIndex corresponds to the Port Number
or POE Index. | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.1 |
| cat2600TsPortResetStats mandatory Setting this object to reset(3) causes all
traffic counters for this port to be set to zero.
Also the value of cat2600TsPortResetTimer is set to
zero. | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.10 |
| cat2600TsPortResetTimer mandatory Time (in 100th second ticks) since the port
counters were reset. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.11 |
| cat2600TsPortResetAddrs mandatory Setting this object to reset(3) clears all
address table entries for this port as well as
setting all port traffic counters to zero and
setting cat2600TsPortResetTimer to zero. | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.12 |
| cat2600TsPortRcvBcasts mandatory Number of Broadcast Frames received on this port
without errors. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.13 |
| cat2600TsPortSwitchedFrames mandatory Number of frames switched on this port | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.14 |
| cat2600TsPortLinkState mandatory Link state of the port. | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.15 |
| cat2600TsPortHashOverflows mandatory Number of times a hash bucket was full when trying to
add an entry to the port address table. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.16 |
| cat2600TsPortAddrAgingTime mandatory Port level address aging time. | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.17 |
| cat2600TsPortSwitchMode mandatory Operational frame switching mode for the port. When
in auto mode the port uses the Direct Cut algorithm
to place the port in either cut-thru or store-and-
forward mode.
This objec… | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.18 |
| cat2600TsPortFixedCfg mandatory Use fixed configuration or run auto detection
to determine configuration. | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.19 |
| cat2600TsPortRcvLocalFrames mandatory Number of frames received where the destination is on this port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.2 |
| cat2600TsPortMode mandatory When read, this object indicates the Port Mode
obtained by the auto-detect function. It is a
valid read object only when TsPortFixedCfg is set
to auto-detect(1) and TsPortLinkSta… | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.20 |
| cat2600TsPortDuplex mandatory Version 1 MIB
When read, this object indicates the Port Duplex state
obtained by the auto-detect function.
This object is a valid read object any time that
TSPortLi… | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.21 |
| cat2600TsPortCfgLoss mandatory Number of events as described in TsPortCfgLossRC
after the port has completed the join process and
then lost communication. | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.22 |
| cat2600TsPortCfgLossRC mandatory Reason code describing the cause of configuration loss. | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.23 |
| cat2600TsPortCRCCount mandatory Number of frames received with CRC error.
This object is equivalent to dot5StatsLineError and to the
dtrMac MIB object txiStatsLineErrorCounter. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.24 |
| cat2600TsPortHPChannelFrames mandatory Number of frames sent to the high priority channel
of the particular Token-Ring port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.25 |
| cat2600TsPortLPChannelFrames mandatory Number of frames sent to the low priority channel
of the particular Token-Ring port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.26 |
| cat2600TsPortHPThreshold mandatory Priority level at which frames are sent to the High
priority channel. | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.27 |
| cat2600TsPortCfgRingSpeed mandatory When read this object indicates the Port Ring Speed
obtained by the RSA function.
Write to this object when defining the Port Ring Speed
for a fixed configuration (… | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.28 |
| cat2600TsPortCfgRSA mandatory User configured Ring Speed Adjust or fixed speed. | column | Enumeration | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.29 |
| cat2600TsPortForwardedFrames mandatory Number of frames received on this port and forwarded to
another port or the system module for processing. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.3 |
| cat2600TsPortDomain mandatory Domain that the port belongs to. | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.30 |
| cat2600TsPortCfgLossThreshold mandatory Number of configuration loss events (described in
TsPortCfgLossRC) during the sample period which, if
exceeded, should cause the port to be disabled. If the
port is disabled by th… | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.31 |
| cat2600TsPortCfgLossSamplingPeriod mandatory The sampling period, in minutes, for which the port
monitors to see if the configuration loss threshold has
been exceeeded. | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.32 |
| cat2600TsPortBeaconStationAddress mandatory MAC address of the Station last generating a beacon MAC frame.
This information is present for the generation of a trap and
should not be used to represent the health of the ring. | column | MacAddr | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.33 |
| cat2600TsPortBeaconType mandatory The type of Beacon which last occurred. Values are the same
as for the Beacon Type subvector and are defined as follows:
X'0001' Issued by a Dual Ring Station duri… | column | Integer32 | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.35 |
| cat2600TsPortMostStations mandatory Highest number of stations ever active at any
time since the last reset of the switch as seen by
this port. This includes the default MAC address entries
for the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.4 |
| cat2600TsPortMaxStations mandatory Maximum number of stations which the port can
support simultaneously. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.5 |
| cat2600TsPortSWHandledFrames mandatory Number of Frames received on this port and
delivered to the system module for processing. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.6 |
| cat2600TsPortLocalStations mandatory Number of stations on this port's address table
which belong to the segment attached to this port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.7 |
| cat2600TsPortRemoteStations mandatory Number of stations on this port's address table
which belong to segments attached to other ports. | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.8 |
| cat2600TsPortUnknownStaFrames mandatory Number of unicast frames received on this port
and forwarded to the system module for processing
because the source or destination station address
is not in the port's forwarding … | column | RFC1155-SMICounter | .1.3.6.1.4.1.9.1.111.1.2.2.1.1.9 |