capwapBaseWtpProfileId
CAPWAP-BASE-MIB ·
.1.3.6.1.2.1.196.1.2.1.1.1
Object
column
CapwapBaseWtpProfileIdTC
Represents the unique identifier of a WTP profile.
Context
- MIB
- CAPWAP-BASE-MIB
- OID
.1.3.6.1.2.1.196.1.2.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- capwapBaseWtpProfileEntry
- Table
- capwapBaseWtpProfileTable
- Siblings
- 18
Syntax
CapwapBaseWtpProfileIdTC
- Source
- CapwapBaseWtpProfileIdTC
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4096
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| capwapBaseWtpProfileWtpNetmask When capwapBaseWtpProfileWtpStaticIpEnable is true,
it represents the netmask to be assigned to the WTP.
The format of this netmask is determined by the
corresponding instance of … | column | OctetString | .1.3.6.1.2.1.196.1.2.1.1.10 |
| capwapBaseWtpProfileWtpGateway When capwapBaseWtpProfileWtpStaticIpEnable is true,
it represents the gateway to be assigned to the WTP.
The format of this IP address is determined by the
corresponding instance … | column | OctetString | .1.3.6.1.2.1.196.1.2.1.1.11 |
| capwapBaseWtpProfileWtpFallbackEnable Represents whether to enable or disable automatic CAPWAP
fallback in the event that a WTP detects its preferred AC
and is not currently connected to it.
The following enumerated v… | column | Enumeration | .1.3.6.1.2.1.196.1.2.1.1.12 |
| capwapBaseWtpProfileWtpEchoInterval Represents the minimum time, in seconds, between sending Echo
Request messages to the AC that the WTP has joined. | column | second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.196.1.2.1.1.13 |
| capwapBaseWtpProfileWtpIdleTimeout Represents the idle timeout value that the WTP SHOULD enforce
for its active stations. | column | second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.196.1.2.1.1.14 |
| capwapBaseWtpProfileWtpMaxDiscoveryInterval Represents the maximum time allowed between sending Discovery
Request messages, in seconds. | column | second Unsigned32 | .1.3.6.1.2.1.196.1.2.1.1.15 |
| capwapBaseWtpProfileWtpReportInterval Represents the interval for WTP to send the Decryption Error
report. | column | second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.196.1.2.1.1.16 |
| capwapBaseWtpProfileWtpStatisticsTimer Represents the interval the WTP uses between the WTP Event
Requests it transmits to the AC to communicate its statistics,
in seconds. | column | second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.196.1.2.1.1.17 |
| capwapBaseWtpProfileWtpEcnSupport Represents the support for the Explicit Congestion Notification
(ECN) bits, as defined in [RFC3168].
The following enumerated values are supported:
limited(0) - Limited E… | column | Enumeration | .1.3.6.1.2.1.196.1.2.1.1.18 |
| capwapBaseWtpProfileRowStatus This object is used to create, modify, and/or delete a row
in this table.
The value of capwapBaseWtpProfileName,
capwapBaseWtpProfileWtpName and capwapBaseWtpProfil… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.196.1.2.1.1.19 |
| capwapBaseWtpProfileName Represents the name of a WTP profile. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.196.1.2.1.1.2 |
| capwapBaseWtpProfileWtpMacAddress Represents the Base MAC address of a WTP.
A WTP profile MUST contain the Base MAC address of the WTP
because the CAPWAP message received from the WTP contains
its Base MAC address… | column | CapwapBaseWtpIdTC | .1.3.6.1.2.1.196.1.2.1.1.3 |
| capwapBaseWtpProfileWtpModelNumber Represents the model number of a WTP.
A WTP profile MUST include the WTP's model number, which
reflects the number of Physical Layer (PHY) radios on the WTP.
In this way, the crea… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.196.1.2.1.1.4 |
| capwapBaseWtpProfileWtpName Represents the name of the WTP. | column | OctetString | .1.3.6.1.2.1.196.1.2.1.1.5 |
| capwapBaseWtpProfileWtpLocation Represents the location of the WTP. | column | OctetString | .1.3.6.1.2.1.196.1.2.1.1.6 |
| capwapBaseWtpProfileWtpStaticIpEnable Represents whether the WTP SHOULD use a static IP address
or not. A value of false disables the static IP address,
while a value of true enables it. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.196.1.2.1.1.7 |
| capwapBaseWtpProfileWtpStaticIpType Represents the static IP address type used by the WTP.
Only ipv4(1) is supported by the object.
Although the CAPWAP protocol [RFC5415] supports both IPv4
and IPv6, note that the C… | column | Enumeration | .1.3.6.1.2.1.196.1.2.1.1.8 |
| capwapBaseWtpProfileWtpStaticIpAddress When capwapBaseWtpProfileWtpStaticIpEnable is true,
it represents the static IP address to be assigned to the WTP.
The format of this IP address is determined by the
corresponding… | column | OctetString | .1.3.6.1.2.1.196.1.2.1.1.9 |