capwapBaseNtfAuthenFailureReason
CAPWAP-BASE-MIB ·
.1.3.6.1.2.1.196.1.5.7
Object
scalar
Enumeration
Represents the reason for WTP authorization failure.
The following enumerated values are supported:
keyMismatch(1) - WTP's and AC's keys did not match
invalidCert(2) - Certification is not valid
reassemblyFailure(3) - Fragment reassembly failure
decapFailure(4) - Decapsulation error
encapFailure(5) - Encapsulation error
timeout(6) - WaitDTLS timer timeout
unknown(8) - Unknown reason
Context
- MIB
- CAPWAP-BASE-MIB
- OID
.1.3.6.1.2.1.196.1.5.7- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- capwapBaseNotifyVarObjects
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| capwapBaseNtfWtpId Represents the unique identifier of a WTP. | scalar | CapwapBaseWtpIdTC | .1.3.6.1.2.1.196.1.5.1 |
| capwapBaseNtfJoinFailureReason Represents the reason of join failure.
The following enumerated values are supported:
unspecified(1) - Unspecified failure
resDepletion(2) - Resource depletion
… | scalar | Enumeration | .1.3.6.1.2.1.196.1.5.10 |
| capwapBaseNtfImageFailureReason Represents the reason of image failure.
The following enumerated values are supported:
invalidChecksum(1) - Invalid checksum
invalidLength(2) - Invalid data length
other(3… | scalar | Enumeration | .1.3.6.1.2.1.196.1.5.11 |
| capwapBaseNtfConfigMsgErrorType Represents the type of configuration message error.
The following enumerated values are supported:
unknownElement(1) - Unknown message element
unsupportedElement(2) - Unsu… | scalar | Enumeration | .1.3.6.1.2.1.196.1.5.12 |
| capwapBaseNtfMsgErrorElements Represents the message elements sent by the AC in the
Configuration Status Response message that caused the error. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.196.1.5.13 |
| capwapBaseNtfRadioId Represents the identifier of a PHY radio on a WTP, which is
only required to be unique on a WTP.
For example, WTP A and WTP B can use the same value of
capwapBaseNtfRadioId for th… | scalar | CapwapBaseRadioIdTC | .1.3.6.1.2.1.196.1.5.2 |
| capwapBaseNtfChannelType Represents the channel type for the CAPWAP protocol. | scalar | CapwapBaseChannelTypeTC | .1.3.6.1.2.1.196.1.5.3 |
| capwapBaseNtfAuthenMethod Represents the authentication method for the CAPWAP Channel. | scalar | CapwapBaseAuthenMethodTC | .1.3.6.1.2.1.196.1.5.4 |
| capwapBaseNtfChannelDownReason Represents the reason the channel is down.
The following enumerated values are supported:
timeout(1) - The keepalive timed out
rekeyFailure(2) - Rekey process failed; c… | scalar | Enumeration | .1.3.6.1.2.1.196.1.5.5 |
| capwapBaseNtfStationIdList Represents a list of station MAC addresses separated by
semicolons. | scalar | OctetString | .1.3.6.1.2.1.196.1.5.6 |
| capwapBaseNtfRadioOperStatusFlag Represents the operation status of a radio.
The following enumerated values are supported:
operable(0) - The radio is operable
inoperable(1) - The radio is inoperable, and t… | scalar | Enumeration | .1.3.6.1.2.1.196.1.5.8 |
| capwapBaseNtfRadioStatusCause Represents the reason why the radio is out of service.
The following enumerated values are supported:
normal(0) - Normal status
hwError(1) - Radio failure
swError(2) - S… | scalar | Enumeration | .1.3.6.1.2.1.196.1.5.9 |