tFTPServerInternetAddressType
CAMBIUM-PTP670-MIB ·
.1.3.6.1.4.1.17713.11.9.18
Object
scalar
Enumeration
The type of Internet address specified by the associated tFTPServerInternetAddress.
Context
- MIB
- CAMBIUM-PTP670-MIB
- OID
.1.3.6.1.4.1.17713.11.9.18- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- management
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
5 | unknown6 |
6 | unknown7 |
7 | unknown8 |
8 | unknown9 |
9 | unknown10 |
10 | unknown11 |
11 | unknown12 |
12 | unknown13 |
13 | unknown14 |
14 | unknown15 |
15 | unknown16 |
16 | dns |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| targetRange Initial target range used in installation +/-1,
expressed in tenths of a kilometer. When Auto-Ranging
this must be set to 0 | scalar | Integer32 | .1.3.6.1.4.1.17713.11.9.1 |
| tFTPSoftwareUpgradeStatusText Descriptive text describing the status of the TFTP
Software upgrade process, including any error details | scalar | OctetString | .1.3.6.1.4.1.17713.11.9.10 |
| tFTPSoftwareUpgradeStatusAdditionalText Any additional text describing the status of the TFTP
Software upgrade process, including any error details | scalar | OctetString | .1.3.6.1.4.1.17713.11.9.11 |
| hTTPAccessEnabled This controls whether or not HTTP access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the HTTP port. Remote
management via HTTPS i… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.12 |
| telnetAccessEnabled This controls whether or not Telnet access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the TELNET port. Any change in
this settin… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.13 |
| hTTPPortNumber This controls the port number for HTTP access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
reboote… | scalar | Integer32 | .1.3.6.1.4.1.17713.11.9.14 |
| hTTPSPortNumber This controls the port number for HTTPS access. A value
of zero will use the default port number. Availability of
HTTPS is controlled via the License Key. Any change in
this se… | scalar | Integer32 | .1.3.6.1.4.1.17713.11.9.15 |
| telnetPortNumber This controls the port number for TELNET access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
reboo… | scalar | Integer32 | .1.3.6.1.4.1.17713.11.9.16 |
| hTTPSAccessEnabled This controls whether or not HTTPS access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the HTTPS port. Remote
management via HTTP … | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.17 |
| tFTPServerInternetAddress INET address of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.11.9.19 |
| rangingMode Type of ranging to use during installation, either
Auto-Ranging or use a selectable Target Range | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.2 |
| lowestDataModulationMode The lowest modulation mode at which Ethernet Data
traffic will be bridged over the wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.20 |
| tFTPClient This controls whether or not TFTP client is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any TFTP software download requests. (Factory
default = Enab… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.22 |
| mgmtInstancedTableNumber Number of entries in the mgmtInstancedTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.9.23 |
| mgmtInstancedTable Instanced management table. | table | - | .1.3.6.1.4.1.17713.11.9.24 |
| tFTPServerResolvedInternetAddress IP Address of the TFTP Server. | scalar | OctetString | .1.3.6.1.4.1.17713.11.9.25 |
| installationMode Determines whether the unit is armed for antenna
alignment, and whether it emits audible installation
tones to indicate the state and strength of the received
signal. Alternati… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.26 |
| installStatusLinked A non-zero value indicates that signalling was received
with the wrong MAC address or a mismatched link name. NB:
It is very unusual to detect this, because units with
mis-conf… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.3 |
| installArmState Indicates if the unit is being installed. NB: a change
of state may generate an SNMP trap and/or SMTP email
alert | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.4 |
| tFTPServerPortNumber The port number of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved | scalar | Integer32 | .1.3.6.1.4.1.17713.11.9.6 |
| tFTPSoftwareUpgradeFileName Filename of the Software Upgrade to be loaded from the
TFTP Server | scalar | OctetString | .1.3.6.1.4.1.17713.11.9.7 |
| tFTPStartSoftwareUpgrade Write '1' to this attribute to start the TFTP software
upgrade process. The attribute will be reset to 0 when
the upgrade process has finished. Continuing with the
software upg… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.11.9.8 |
| tFTPSoftwareUpgradeStatus The current status of the TFTP Software upgrade process | scalar | Enumeration | .1.3.6.1.4.1.17713.11.9.9 |