maximumTransmitPower
CAMBIUM-PTP670-MIB ·
.1.3.6.1.4.1.17713.11.5.6
Object
scalar
Integer32
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link. This may be reduced during installation
Context
- MIB
- CAMBIUM-PTP670-MIB
- OID
.1.3.6.1.4.1.17713.11.5.6- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- configuration
- Siblings
- 31
Syntax
Integer32
Values & Constraints
Object Constraints
range: -15-30
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iPv4Address Internet protocol (IPv4) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.11.5.1 |
| channelBandwidth This control sets the bandwidth of the transmit and
receive radio channels | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.11 |
| linkName Name of the link allocated by the System Administrator.
Used to establish a connection with the correct wireless
unit at the other end of the link. NOTE: The link name
MUST be … | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.14 |
| siteName This field contains a user-provided description of the
site name together with any additional notes | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.15 |
| accessMethod ODUs must be configured in pairs before a link can be
established. The Access Method attribute determines how
the paired ODUs will recognise each other. For the Link
Access met… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.16 |
| groupID When Access Method is set to Group Access, the Group ID
identifies all the units belonging to the same group | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.17 |
| iPv6Address Internet protocol (IPv6) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.18 |
| subnetMask A subnet allows the flow of network traffic between
hosts to be segregated based on a network configuration.
By organizing hosts into logical groups, subnetting can
improve net… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.11.5.2 |
| iPVersion IP protocol selection. Choice of IPv4, IPv6 or Dual. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.20 |
| iPv6AutoConfiguredLinkLocalAddress The auto configured link local IPv6 address | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.21 |
| iPv6PrefixLength IPv6 prefix length | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.22 |
| iPv6GatewayAddress The IPv6 address of a device on the current network that
is currently acting as an IPv6 network gateway. A gateway
acts as an entrance / exit to packets from / to other
network… | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.23 |
| remoteInternetAddressTypeLinked The type of Internet address specified by the associated
remoteInternetAddressType. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.24 |
| remoteInternetAddressLinked INET address used to identify the peer wireless unit | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.11.5.25 |
| subbandLowestFrequency Lowest center frequency of the subset of channels. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.11.5.26 |
| subbandHighestFrequency Highest center frequency of the subset of channels. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.11.5.27 |
| enableTransmission Control for enabling/disabling the radio transmitter of
the Master. Note: Use Web Properties to control this
feature. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.28 |
| antennaSelection Antenna Selection. Choice of Integrated or
Connectorized | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.29 |
| gatewayIPAddress The IPv4 address of a device on the current network that
acts as an IPv4 network gateway. A gateway acts as an
entrance / exit to packets from / to other networks | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.11.5.3 |
| transmitterChannels To select transmitter channel(s) (H,V) | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.30 |
| wirelessTopology This attribute determines whether the device operates as
part of a PTP or an HCMP network topology. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.31 |
| configurationInstancedTableNumber Number of entries in the ConfigurationInstancedTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.32 |
| configurationInstancedTable Instanced Public stats table. | table | - | .1.3.6.1.4.1.17713.11.5.33 |
| unitName This field contains user-provided name for this unit | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.34 |
| authorizationMethod Authorization Method to be used - Whitelist or
Blacklist | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.35 |
| remoteUnitNameLinked This field contains user-provided name of the peer
received over the wireless link | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.36 |
| targetMACAddress MAC address of the unit forming the other end of the
link | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.4 |
| masterSlaveMode The wireless link operates using a master and slave
relationship | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.5 |
| antennaGain Antenna Gain. Expressed in 10ths of dBi. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.7 |
| cableLoss Loss in the cable between the ODU and the antenna.
Expressed in 10ths of dB. NB: This attribute is ignored
for variants with an integral antenna. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.8 |
| eIRP Effective Isotropic Radiated Power (EIRP) describes the
strength of the radio signal leaving the wireless unit.
Expressed in 10ths of dBm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.11.5.9 |