incompatibleRegulatoryBandsLinked
CAMBIUM-PTP670-MIB ·
.1.3.6.1.4.1.17713.11.13.4
Object
scalar
Enumeration
The master and slave units have incompatible regulatory bands. NB: Both units must have compatible license keys
Context
- MIB
- CAMBIUM-PTP670-MIB
- OID
.1.3.6.1.4.1.17713.11.13.4- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- alarms
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | regOK |
1 | regIncompatibleLicenseKeys |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| unitOutOfCalibration The unit is out of calibration | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.1 |
| incompatibleMasterAndSlaveLinked A non-zero value indicates that the master and slave
ends of a link are different hardware products, or have
different software versions, or have different TDD Frame
Configurat… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.10 |
| tDDSynchronizationStatus An alarm value (displayed in red) indicates that one of
the following conditions has not been met (i) An external
timing system is connected or internal timing has been
configu… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.11 |
| auxPortDisabledWarning The SNMP ifAdminStatus of the interface has disabled
Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.12 |
| tDDSynchronizationAlarm Not Synchronized indicates failure of the external
timing system for a period greater than the holdover
timer. TDD frame timing will have drifted, and this link
may cause inter… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.13 |
| linkModeOptimizationMismatchLinked The remote node of this link has been configured with a
different link mode optimization | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.14 |
| auxPortConfigurationMismatch The detection of Ethernet fragments (runt packets) when
the link is in full duplex is an indication of an
auto-negotiation or forced configuration mismatch. This
alarm is only … | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.15 |
| secureModeAlarm The secure mode (e.g. FIPS, UC-APL) state of the unit.
The secure mode is not configured(1) state indicates that
the unit is capable of secure mode operation, and one or
more o… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.16 |
| dataBridgingStatusAlarmLinked Ethernet Data traffic bridging is disabled because the
wireless link is not operating at the configured Lowest
Data Modulation Mode | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.17 |
| sFPPortDisabledWarning The SNMP ifAdminStatus of the interface has disabled
Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.18 |
| sFPPortConfigurationMismatch The detection of Ethernet fragments (runt packets) when
the link is in full duplex is an indication of an
auto-negotiation or forced configuration mismatch. This
alarm is only … | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.19 |
| maxLinkRangeExceededLinked The measured link range is greater than the maximum
allowed by the license key. The link will operate at a
reduced capacity while this condition applies. This alarm
is only rai… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.20 |
| nIDULanPortDisabledWarning The SNMP ifAdminStatus of the interface has disabled
Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.21 |
| nIDULanPortConfigurationMismatch The detection of Ethernet fragments (runt packets) when
the link is in full duplex is an indication of an
auto-negotiation or forced configuration mismatch. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.22 |
| portAllocationMismatchLinked The local and remote ODUs have different services
configured. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.23 |
| transparentClockSourcePortAlarm Transparent Clock will not function properly because
SFP, the selected clock source port is not FIBER | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.25 |
| alarmInstancedTableNumber Number of entries in the alarmInstancedTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.13.26 |
| alarmInstancedTable Instanced alarm table. | table | - | .1.3.6.1.4.1.17713.11.13.27 |
| secureLicenseSignatureAlarm Alarm condition indicates that the unit's license is not
secure enough for FIPS approved mode. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.28 |
| noWirelessChannelAvailable Spectrum Management was unable to locate a suitable
wireless channel to operate on | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.5 |
| wirelessLinkDisabledWarning The SNMP ifAdminStatus of the wireless interface has
disabled wireless traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.6 |
| mainPSUPortDisabledWarning The SNMP ifAdminStatus of the interface has disabled
Ethernet traffic | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.7 |
| sFPError If the SFP link is not OK, there are five possible
causes: Either a SFP has been installed but the license
key does not include SFP fiber support, a fiber link
could not be est… | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.8 |
| mainPSUPortConfigurationMismatch The detection of Ethernet fragments (runt packets) when
the link is in full duplex is an indication of an
auto-negotiation or forced configuration mismatch | scalar | Enumeration | .1.3.6.1.4.1.17713.11.13.9 |