accessMethod
CAMBIUM-PTP670-MIB ·
.1.3.6.1.4.1.17713.11.5.16
Object
scalar
Enumeration
ODUs must be configured in pairs before a link can be established. The Access Method attribute determines how the paired ODUs will recognise each other. For the Link Access method, each ODU must be configured with Target MAC Address equal to the MAC Address of the other unit. For the Link Name Access method, both units must be configured with the same Link Name. For the Group Access method, both units must be configured with the same Group ID.
Context
- MIB
- CAMBIUM-PTP670-MIB
- OID
.1.3.6.1.4.1.17713.11.5.16- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- configuration
- Siblings
- 31
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | linkAccess |
1 | linkNameAccess |
2 | groupAccess |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iPv4Address Internet protocol (IPv4) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.11.5.1 |
| channelBandwidth This control sets the bandwidth of the transmit and
receive radio channels | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.11 |
| linkName Name of the link allocated by the System Administrator.
Used to establish a connection with the correct wireless
unit at the other end of the link. NOTE: The link name
MUST be … | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.14 |
| siteName This field contains a user-provided description of the
site name together with any additional notes | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.15 |
| groupID When Access Method is set to Group Access, the Group ID
identifies all the units belonging to the same group | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.17 |
| iPv6Address Internet protocol (IPv6) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.18 |
| subnetMask A subnet allows the flow of network traffic between
hosts to be segregated based on a network configuration.
By organizing hosts into logical groups, subnetting can
improve net… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.11.5.2 |
| iPVersion IP protocol selection. Choice of IPv4, IPv6 or Dual. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.20 |
| iPv6AutoConfiguredLinkLocalAddress The auto configured link local IPv6 address | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.21 |
| iPv6PrefixLength IPv6 prefix length | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.22 |
| iPv6GatewayAddress The IPv6 address of a device on the current network that
is currently acting as an IPv6 network gateway. A gateway
acts as an entrance / exit to packets from / to other
network… | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.23 |
| remoteInternetAddressTypeLinked The type of Internet address specified by the associated
remoteInternetAddressType. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.24 |
| remoteInternetAddressLinked INET address used to identify the peer wireless unit | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.11.5.25 |
| subbandLowestFrequency Lowest center frequency of the subset of channels. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.11.5.26 |
| subbandHighestFrequency Highest center frequency of the subset of channels. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.11.5.27 |
| enableTransmission Control for enabling/disabling the radio transmitter of
the Master. Note: Use Web Properties to control this
feature. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.28 |
| antennaSelection Antenna Selection. Choice of Integrated or
Connectorized | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.29 |
| gatewayIPAddress The IPv4 address of a device on the current network that
acts as an IPv4 network gateway. A gateway acts as an
entrance / exit to packets from / to other networks | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.11.5.3 |
| transmitterChannels To select transmitter channel(s) (H,V) | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.30 |
| wirelessTopology This attribute determines whether the device operates as
part of a PTP or an HCMP network topology. | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.31 |
| configurationInstancedTableNumber Number of entries in the ConfigurationInstancedTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.32 |
| configurationInstancedTable Instanced Public stats table. | table | - | .1.3.6.1.4.1.17713.11.5.33 |
| unitName This field contains user-provided name for this unit | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.34 |
| authorizationMethod Authorization Method to be used - Whitelist or
Blacklist | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.35 |
| remoteUnitNameLinked This field contains user-provided name of the peer
received over the wireless link | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.36 |
| targetMACAddress MAC address of the unit forming the other end of the
link | scalar | OctetString | .1.3.6.1.4.1.17713.11.5.4 |
| masterSlaveMode The wireless link operates using a master and slave
relationship | scalar | Enumeration | .1.3.6.1.4.1.17713.11.5.5 |
| maximumTransmitPower Maximum transmit power the wireless unit is permitted to
use when establishing and maintaining the wireless link.
This may be reduced during installation | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.6 |
| antennaGain Antenna Gain. Expressed in 10ths of dBi. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.7 |
| cableLoss Loss in the cable between the ODU and the antenna.
Expressed in 10ths of dB. NB: This attribute is ignored
for variants with an integral antenna. | scalar | Integer32 | .1.3.6.1.4.1.17713.11.5.8 |
| eIRP Effective Isotropic Radiated Power (EIRP) describes the
strength of the radio signal leaving the wireless unit.
Expressed in 10ths of dBm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.11.5.9 |