dataPortPauseFrames
CAMBIUM-PTP650-MIB ·
.1.3.6.1.4.1.17713.7.6.31
Object
scalar
Enumeration
Controls whether the bridge tunnels or discards Layer 2 PAUSE frames arriving at the Data Port. Such frames are identified by the destination MAC Address being equal to 01-80-C2-00-00-01
Context
- MIB
- CAMBIUM-PTP650-MIB
- OID
.1.3.6.1.4.1.17713.7.6.31- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- ethernet
- Siblings
- 74
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | tunnel |
1 | discard |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mainPSUPortAutoNegotiation This controls whether the local Ethernet interface
configuration is automatically negotiated or forced. Do
not use a forced setting together with auto negotiation
at the Ethern… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.1 |
| vLANManagementVID This VLAN VID (0-4094) will be included in packets
generated by the management interfaces. Note the new
setting will only take effect after a system reboot | scalar | Integer32 | .1.3.6.1.4.1.17713.7.6.11 |
| auxPortStatus Current status of the Aux Ethernet link. NB: a change of
state may generate an SNMP trap and/or SMTP email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.12 |
| auxPortSpeedAndDuplex The current speed and duplex of the Aux Ethernet link | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.13 |
| ethernetPriorityTableNumber Number of entries in the vLANPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.7.6.14 |
| ethernetPriorityTable A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority. | table | - | .1.3.6.1.4.1.17713.7.6.15 |
| l2CPPriorityTableNumber Number of entries in the l2CPPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.7.6.16 |
| l2CPPriorityTable A priority queue mapping table. This is a list of packet queues indexed by L2CP priority. | table | - | .1.3.6.1.4.1.17713.7.6.17 |
| iPDSCPPriorityTableNumber Number of entries in the iPDSCPPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.7.6.18 |
| iPDSCPPriorityTable A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority. | table | - | .1.3.6.1.4.1.17713.7.6.19 |
| mainPSUPortAutoNegAdvertisement This sets the different Ethernet configurations that
will be advertised during auto negotiation. Note the new
setting will only take effect after a system reboot.
WARNING: Dupl… | scalar | Bits | .1.3.6.1.4.1.17713.7.6.2 |
| mPLSTCPriorityTableNumber Number of entries in the mPLSTCPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.7.6.20 |
| mPLSTCPriorityTable A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority. | table | - | .1.3.6.1.4.1.17713.7.6.21 |
| managementPortWirelessDownAlert When enabled, this causes the management link to be
dropped briefly when the wireless link drops. This is so
that spanning tree algorithms can quickly detect that
there is a pr… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.23 |
| qOSPriorityScheme Selects classification based on fields in the Ethernet
header (Layer 2) or in the Network header (Layer 3). The
unit recognises two network layer protocols: IP and MPLS | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.24 |
| unknownNetworkPriorityQueueMapping Configures the classification of unknown network
protocols to an egress queue at the wireless port.
Unknown means something other than IP and MPLS | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.25 |
| dSCPManagementPriority This Differentiated Services Code Point value will be
inserted in the IP Header of all IP Datagrams transmitted
by the management interfaces | scalar | Integer32 | .1.3.6.1.4.1.17713.7.6.26 |
| dataBridgingStatus Current status of Ethernet Data traffic bridging over
the wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.27 |
| mainPSUPortAllocation Indicates the service or services supported by the Main
PSU Ethernet port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.28 |
| auxPortAllocation Indicates the service or services supported by the Aux
Ethernet port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.29 |
| mainPSUPortAutoMdix This enables/disables the Auto MDI/MDIX capability. NB:
The new setting will only take effect after a system
reboot | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.3 |
| sFPPortAllocation Indicates the service or services supported by the SFP
Ethernet port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.30 |
| sFPPortAutoNegotiation This controls whether the local SFP Ethernet interface
configuration is automatically negotiated or forced. Do
not use a forced setting together with auto negotiation
at the Et… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.32 |
| sFPPortAutoNegAdvertisement This sets the different SFP Ethernet configurations that
will be advertised during auto negotiation. Note the new
setting will only take effect after a system reboot.
WARNING: … | scalar | Bits | .1.3.6.1.4.1.17713.7.6.33 |
| sFPPortAutoMdix This enables/disables the Auto MDI/MDIX capability. NB:
The new setting will only take effect after a system
reboot | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.34 |
| sFPPortStatus Current status of the SFP Ethernet link. NB: a change of
state may generate an SNMP trap and/or SMTP email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.35 |
| sFPPortSpeedAndDuplex The current speed and duplex of the SFP Ethernet link | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.36 |
| auxPortPowerOverEthernetOutput The state of the Power Over Ethernet (PoE) output of the
Aux port. Enabling PoE output may lead to system
instability; please refer to the User Guide before
enabling this contr… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.37 |
| auxPortPowerOverEthernetOutputStatus Current status of the Power Over Ethernet (PoE) output
of the Aux port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.38 |
| syncETracking Controls whether Synchronous Ethernet (SyncE) network
synchronization is enabled. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.39 |
| mainPSUPortStatus Current status of the Main PSU Ethernet link. NB: a
change of state may generate an SNMP trap and/or SMTP
email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.4 |
| syncEEquipmentClock EEC-Option 1 applies to synchronous Ethernet equipments
that are designed to interwork with networks optimized
for the 2048-kbit/s hierarchy. Corresponds to ITU-T G.813
Option … | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.40 |
| mainPSUPortQLRxOverwrite Override for the Synchronous Ethernet (SyncE) received
Quality Level (QL) on the main PSU port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.41 |
| mainPSUPortSSMTx Controls whether the Synchronous Ethernet (SyncE)
Quality Level (QL) is transmitted on the Main PSU port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.42 |
| sFPPortSSMTx Controls whether the Synchronous Ethernet (SyncE)
Quality Level (QL) is transmitted on the SFP port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.43 |
| auxPortSSMTx Controls whether the Synchronous Ethernet (SyncE)
Quality Level (QL) is transmitted on the Aux port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.44 |
| syncETrackingState The current state of Synchronous Ethernet (SyncE)
network synchronization. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.45 |
| mainPSUPortQLRx The Synchronous Ethernet (SyncE) Quality Level (QL)
currently being received on the main PSU port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.46 |
| auxPortQLRx The Synchronous Ethernet (SyncE) Quality Level (QL)
currently being received on the auxiliary port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.47 |
| sFPPortQLRx The Synchronous Ethernet (SyncE) Quality Level (QL)
currently being received on the SFP port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.48 |
| mainPSUPortQLTx The Synchronous Ethernet (SyncE) transmit Quality Level
(QL) of the main PSU port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.49 |
| mainPSUPortSpeedAndDuplex The current speed and duplex of the Main PSU Ethernet
link | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.5 |
| auxPortQLTx The Synchronous Ethernet (SyncE) transmit Quality Level
(QL) of the auxiliary port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.50 |
| sFPPortQLTx The Synchronous Ethernet (SyncE) transmit Quality Level
(QL) of the SFP port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.51 |
| mainPSUPortSyncEMasterSlaveStatus The main PSU port Synchronous Ethernet (SyncE)
Master/Slave status | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.52 |
| auxPortSyncEMasterSlaveStatus The auxiliary port Synchronous Ethernet (SyncE)
Master/Slave status | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.53 |
| sFPPortSyncEMasterSlaveStatus The SFP port Synchronous Ethernet (SyncE) Master/Slave
status | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.54 |
| mainPSUPortGigabitMasterSlaveStatus The main PSU port Gigabit Ethernet Master/Slave status | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.55 |
| auxPortGigabitMasterSlaveStatus The auxiliary port Gigabit Ethernet Master/Slave status | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.56 |
| sFPPortGigabitMasterSlaveStatus The SFP port Gigabit Ethernet Master/Slave status | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.57 |
| transparentClock This control enables the Precision Time Protocol
(IEEE-1588) Transparent Clock. Once enabled the unit will
modify the correction field in PTP event messages to take
account of … | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.58 |
| transparentClockVLAN If All is selected then all PTP frames will have their
correction fields modified with the residence time. If an
S-TAG or C-TAG is selected, only frames with this VLAN
tag and … | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.59 |
| dataPortWirelessDownAlert When enabled, this causes the Ethernet link to be
dropped briefly when the wireless link drops. This is so
that spanning tree algorithms can quickly detect that
there is a prob… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.6 |
| transparentClockVID The VLAN ID which frames must match if they are to be
corrected. Only valid when an S-TAG or C-TAG has been
selected. | scalar | Integer32 | .1.3.6.1.4.1.17713.7.6.60 |
| mainPSUPortAcceptedQLRx The Synchronous Ethernet (SyncE) Quality Level (QL)
currently accepted (validated) on the main PSU port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.61 |
| auxPortAcceptedQLRx The Synchronous Ethernet (SyncE) Quality Level (QL)
currently accepted (validated) on the auxiliary port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.62 |
| sFPPortAcceptedQLRx The Synchronous Ethernet (SyncE) Quality Level (QL)
currently accepted (validated) on the SFP port. | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.63 |
| mainPSUPortSyncERxStatus The Synchronous Ethernet (SyncE) Receive Status of the
main PSU port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.64 |
| auxPortSyncERxStatus The Synchronous Ethernet (SyncE) Receive Status of the
auxiliary port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.65 |
| sFPPortSyncERxStatus The Synchronous Ethernet (SyncE) Receive Status of the
SFP port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.66 |
| nIDULanPortStatus Current status of the NIDU LAN Ethernet link. NB: a
change of state may generate an SNMP trap and/or SMTP
email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.67 |
| nIDULanPortSpeedAndDuplex The current speed and duplex of the Ethernet link to the
NIDU LAN Port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.68 |
| oOBPriorityQueueMapping Configures the classification of traffic to an egress
queue at the wireless port | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.69 |
| useVLANForManagementInterfaces This controls whether the management interfaces
(WWW/SNMP/SMTP/SNTP) use VLAN tags or not. NB: The new
setting will only take effect after a system reboot | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.7 |
| nIDULanPortAutoNegotiation This controls whether the local Ethernet interface
configuration is automatically negotiated or forced. Do
not use a forced setting together with auto negotiation
at the Ethern… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.70 |
| nIDULanPortAutoNegAdvertisement This sets the different Ethernet configurations that
will be advertised during auto negotiation. Note the new
setting will only take effect after a system reboot.
WARNING: Dupl… | scalar | Bits | .1.3.6.1.4.1.17713.7.6.71 |
| nIDULanPortAutoMdix This enables/disables the Auto MDI/MDIX capability. NB:
The new setting will only take effect after a system
reboot | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.72 |
| nIDULanPortGigabitMasterSlaveStatus The NIDU LAN port Gigabit Ethernet Master/Slave status | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.73 |
| txMABFrames Number of MAB frames transmitted | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.7.6.74 |
| managementNetworkAccessEnabled When enabled the local Out-of-Band interface can be used
to access the remote management network. If not enabled
the local management agent can still be accessed from the
remot… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.75 |
| secondDataPortPauseFrames Controls whether the bridge tunnels or discards Layer 2
PAUSE frames arriving at the Second Data Service Port.
Such frames are identified by the destination MAC Address
being e… | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.76 |
| vLANManagementPriority This VLAN Priority (0-7) will be included in packets
generated by the management interfaces | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.8 |
| secondDataBridgingStatus Current status of bridging Second Data Service Ethernet
traffic over the wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.80 |
| transparentClockPort IEEE 1588 Transparent Clock source | scalar | Enumeration | .1.3.6.1.4.1.17713.7.6.81 |