telecom
CAMBIUM-PTP600-MIB ·
.1.3.6.1.4.1.17713.6.7
Object
node
No description available.
Context
- MIB
- CAMBIUM-PTP600-MIB
- OID
.1.3.6.1.4.1.17713.6.7- Type
- node
- Parent
- ptp600
- Siblings
- 22
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| phyControl | node | - | .1.3.6.1.4.1.17713.6.10 |
| phyStatus | node | - | .1.3.6.1.4.1.17713.6.12 |
| alarms | node | - | .1.3.6.1.4.1.17713.6.13 |
| smtp | node | - | .1.3.6.1.4.1.17713.6.15 |
| snmpControl | node | - | .1.3.6.1.4.1.17713.6.16 |
| sntp | node | - | .1.3.6.1.4.1.17713.6.17 |
| reset | node | - | .1.3.6.1.4.1.17713.6.18 |
| versions | node | - | .1.3.6.1.4.1.17713.6.19 |
| pubStats | node | - | .1.3.6.1.4.1.17713.6.20 |
| encryption | node | - | .1.3.6.1.4.1.17713.6.22 |
| tDDControl | node | - | .1.3.6.1.4.1.17713.6.23 |
| syslogControl | node | - | .1.3.6.1.4.1.17713.6.24 |
| aAAControl | node | - | .1.3.6.1.4.1.17713.6.25 |
| dfs | node | - | .1.3.6.1.4.1.17713.6.3 |
| bridge | node | - | .1.3.6.1.4.1.17713.6.4 |
| configuration | node | - | .1.3.6.1.4.1.17713.6.5 |
| ethernet | node | - | .1.3.6.1.4.1.17713.6.6 |
| licence | node | - | .1.3.6.1.4.1.17713.6.8 |
| management | node | - | .1.3.6.1.4.1.17713.6.9 |
| supplementary | node | - | .1.3.6.1.4.1.17713.6.96 |
| ptpGroups | node | - | .1.3.6.1.4.1.17713.6.98 |
| ptpTraps | node | - | .1.3.6.1.4.1.17713.6.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| telecomsInterface The line interface type. If this is set to 'None' then
the telecoms interfaces are disabled, and the telecom
group attributes will be ignored. | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.1 |
| telecomsChannelSelection Indicates which telecoms channels have been enabled. If
only Channel A has been enabled, then the Channel B
attributes will be ignored. | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.10 |
| telecomsChannelAStatus Current status of telecoms channel A. NB: a change of
state may generate an SNMP trap and/or SMTP email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.2 |
| telecomsChannelBStatus Current status of telecoms channel B. NB: a change of
state may generate an SNMP trap and/or SMTP email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.3 |
| channelALineCode The line code setting of the telecoms interface. This
must match the setting of the device connected to this
interface | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.4 |
| channelBLineCode The line code setting of the telecoms interface. This
must match the setting of the device connected to this
interface | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.5 |
| channelACableLength The length of the cable connected to the telecoms
interface, measured in feet | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.6 |
| channelBCableLength The length of the cable connected to the telecoms
interface, measured in feet | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.7 |
| channelALoopback The loopback status of telecoms channel A. This is
intended for installation testing and should be set to
'None' for normal operation. The wire connections to a
unit can be tes… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.8 |
| channelBLoopback The loopback status of telecoms channel B. This is
intended for installation testing and should be set to
'None' for normal operation. The wire connections to a
unit can be tes… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.7.9 |