siteName
CAMBIUM-PTP600-MIB ·
.1.3.6.1.4.1.17713.6.5.15
Object
scalar
r/w
OctetString
This field contains a user-provided description of the site name together with any additional notes
Context
- MIB
- CAMBIUM-PTP600-MIB
- OID
.1.3.6.1.4.1.17713.6.5.15- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- configuration
- Siblings
- 22
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iPv4Address Internet protocol (IPv4) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. NB: A system reboot is required to
activa… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.6.5.1 |
| ethernetCappedMaxWirelessSpeed Ethernet frames will be discarded in the ODU if the data
rate over the wireless link exceeds the Ethernet link
speed at the local or remote Data port. The Ethernet
Capped Max W… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.5.10 |
| channelBandwidth This control sets the bandwidth of the transmit and
receive radio channels | scalar | Enumeration | .1.3.6.1.4.1.17713.6.5.11 |
| remoteIPAddress IP Address of the peer wireless unit | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.6.5.12 |
| linkName Name of the PTP link allocated by the System
Administrator. Used to establish a connection with the
correct PTP wireless unit at the other end of the link.
NOTE: The link name … | scalar | OctetString | .1.3.6.1.4.1.17713.6.5.14 |
| accessMethod ODUs must be configured in pairs before a link can be
established. The Access Method attribute determines how
the paired ODUs will recognise each other. For the Link
Access met… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.5.16 |
| groupID When Access Method is set to Group Access, the Group ID
identifies all the units belonging to the same group | scalar | Integer32 | .1.3.6.1.4.1.17713.6.5.17 |
| iPv6Address Internet protocol (IPv6) address. This address is used
by the family of Internet protocols to uniquely identify
the unit on a network. NB: A system reboot is required to
activa… | scalar | OctetString | .1.3.6.1.4.1.17713.6.5.18 |
| subnetMask A subnet allows the flow of network traffic between
hosts to be segregated based on a network configuration.
By organizing hosts into logical groups, subnetting can
improve net… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.6.5.2 |
| iPVersion IP protocol selection. Choice of IPv4, IPv6 or Dual. | scalar | Enumeration | .1.3.6.1.4.1.17713.6.5.20 |
| iPv6AutoConfiguredLinkLocalAddress The auto configured link local IPv6 address | scalar | OctetString | .1.3.6.1.4.1.17713.6.5.21 |
| iPv6PrefixLength IPv6 prefix length | scalar | Integer32 | .1.3.6.1.4.1.17713.6.5.22 |
| iPv6GatewayAddress The IPv6 address of a computer on the current network
that is currently acting as an IPv6 network gateway. A
gateway acts as an entrance / exit to packets from / to
other netwo… | scalar | OctetString | .1.3.6.1.4.1.17713.6.5.23 |
| remoteInternetAddressType The type of Internet address specified by the associated
remoteInternetAddressType. | scalar | Enumeration | .1.3.6.1.4.1.17713.6.5.24 |
| remoteInternetAddress INET address used to identify the peer wireless unit | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.17713.6.5.25 |
| gatewayIPAddress The IPv4 address of a computer on the current network
that is currently acting as an IPv4 network gateway. A
gateway acts as an entrance / exit to packets from / to
other netwo… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.6.5.3 |
| targetMACAddress MAC address of the PTP wireless unit forming the other
end of the PTP link | scalar | OctetString | .1.3.6.1.4.1.17713.6.5.4 |
| masterSlaveMode The PTP wireless link operates using a master and slave
relationship | scalar | Enumeration | .1.3.6.1.4.1.17713.6.5.5 |
| maximumTransmitPower Maximum transmit power the wireless unit is permitted to
use when establishing and maintaining the wireless link | scalar | Integer32 | .1.3.6.1.4.1.17713.6.5.6 |
| antennaGain Antenna Gain. Expressed in 10ths of dBi. NB: This
attribute is ignored for variants with an integral
antenna. | scalar | Integer32 | .1.3.6.1.4.1.17713.6.5.7 |
| cableLoss Loss in the cable between the ODU and the antenna.
Expressed in 10ths of dB. NB: This attribute is ignored
for variants with an integral antenna. | scalar | Integer32 | .1.3.6.1.4.1.17713.6.5.8 |
| eIRP Effective Isotropic Radiated Power (EIRP) describes the
strength of the radio signal leaving the wireless unit.
Expressed in 10ths of dBm | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.6.5.9 |