dataPortAutoNegAdvertisement
CAMBIUM-PTP600-MIB ·
.1.3.6.1.4.1.17713.6.6.2
Object
scalar
r/w
Bits
This sets the different Ethernet configurations that will be advertised during auto negotiation. Note the new setting will only take effect after a system reboot. WARNING: Duplex mismatch may result if both ends of the Ethernet link do not have the same settings. Do not auto negotiation together with a fixed setting at the Ethernet link partner. WARNING: Make sure that you select option(s) that you know your connected equipment can cater for!
Context
- MIB
- CAMBIUM-PTP600-MIB
- OID
.1.3.6.1.4.1.17713.6.6.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- ethernet
- Siblings
- 24
Syntax
Bits
Values & Constraints
Enumerated Values
2 | negInvalid |
3 | neg10MbpsHalfDuplex |
4 | neg10MbpsFullDuplex |
5 | neg100MbpsHalfDuplex |
6 | neg100MbpsFullDuplex |
7 | neg1000MbpsFullDuplex |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dataPortAutoNegotiation This controls whether the local Ethernet interface
configuration is automatically negotiated or forced. Do
not use a forced setting together with auto negotiation
at the Ethern… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.1 |
| vLANManagementVID This VLAN VID (0-4094) will be included in packets
generated by the management interfaces. Note the new
setting will only take effect after a system reboot | scalar | Integer32 | .1.3.6.1.4.1.17713.6.6.11 |
| managementPortStatus Current status of the out-of-band management link. NB: a
change of state may generate an SNMP trap and/or SMTP
email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.12 |
| managementPortSpeedAndDuplex The current speed and duplex of the out-of-band
management link | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.13 |
| ethernetPriorityTableNumber Number of entries in the vLANPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.6.6.14 |
| ethernetPriorityTable A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority. | table | - | .1.3.6.1.4.1.17713.6.6.15 |
| l2CPPriorityTableNumber Number of entries in the l2CPPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.6.6.16 |
| l2CPPriorityTable A priority queue mapping table. This is a list of packet queues indexed by L2CP priority. | table | - | .1.3.6.1.4.1.17713.6.6.17 |
| iPDSCPPriorityTableNumber Number of entries in the iPDSCPPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.6.6.18 |
| iPDSCPPriorityTable A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority. | table | - | .1.3.6.1.4.1.17713.6.6.19 |
| mPLSTCPriorityTableNumber Number of entries in the mPLSTCPriorityTable. | scalar | Integer32 | .1.3.6.1.4.1.17713.6.6.20 |
| mPLSTCPriorityTable A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority. | table | - | .1.3.6.1.4.1.17713.6.6.21 |
| managementMode Out-of-Band Management (only available on certain
hardware models): End-to-end out-of-band mode in which
the management agent can be reached from the management
port at the loc… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.22 |
| managementPortWirelessDownAlert When enabled, this causes the management link to be
dropped briefly when the wireless link drops. This is so
that spanning tree algorithms can quickly detect that
there is a pr… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.23 |
| qOSPriorityScheme Selects classification based on fields in the Ethernet
header (Layer 2) or in the Network header (Layer 3). The
unit recognises two network layer protocols: IP and MPLS | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.24 |
| unknownNetworkPriorityQueueMapping Configures the classification of unknown network
protocols to an egress queue at the wireless port.
Unknown means something other than IP and MPLS | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.25 |
| dSCPManagementPriority This Differentiated Services Code Point value will be
inserted in the IP Header of all IP Datagrams transmitted
by the management interfaces | scalar | Integer32 | .1.3.6.1.4.1.17713.6.6.26 |
| ethernetBridgingStatus Current status of Ethernet packet bridging over the
wireless link | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.27 |
| dataPortAutoMdix This enables/disables the Auto MDI/MDIX capability. NB:
The new setting will only take effect after a system
reboot | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.3 |
| dataPortStatus Current status of the Ethernet link. NB: a change of
state may generate an SNMP trap and/or SMTP email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.4 |
| dataPortSpeedAndDuplex The current speed and duplex of the Ethernet link | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.5 |
| dataPortWirelessDownAlert When enabled, this causes the Ethernet link to be
dropped briefly when the wireless link drops. This is so
that spanning tree algorithms can quickly detect that
there is a prob… | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.6 |
| useVLANForManagementInterfaces This controls whether the management interfaces
(WWW/SNMP/SMTP/SNTP) use VLAN tags or not. NB: The new
setting will only take effect after a system reboot | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.7 |
| vLANManagementPriority This VLAN Priority (0-7) will be included in packets
generated by the management interfaces. NB: The new
setting will only take effect after a system reboot | scalar | Enumeration | .1.3.6.1.4.1.17713.6.6.8 |