networkWanPPPoEAuth

CAMBIUM-PMP80211-MIB · .1.3.6.1.4.1.17713.21.3.4.3.14
MIB view Table view

Object

scalar r/w Integer32 
SM only.This indicates type of authentication
with PPPoE Server. Options are
0 - All
1 - PAP
2 - CHAP

Context

MIB
CAMBIUM-PMP80211-MIB
OID
.1.3.6.1.4.1.17713.21.3.4.3.14
Type
scalar
Access
readwrite
Status
current
Parent
networkWan
Siblings
21

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-2

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
networkWanIPAddressMode
SM NAT WAN IP Address Mode 1 - Static, 2 - DHCP Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.1
networkWanPPPoEUsername
SM only. Username to authenticate with PPPoE Server. Only private community can read this attribute.
scalarOctetString.1.3.6.1.4.1.17713.21.3.4.3.10
networkWanPPPoEPassword
SM only. Password to authenticate with PPPoE Server. Only private community can read this attribute.
scalarOctetString.1.3.6.1.4.1.17713.21.3.4.3.11
networkWanPPPoEAC
SM only.PPPoE Access Concentrator Name
scalarOctetString.1.3.6.1.4.1.17713.21.3.4.3.12
networkWanPPPoEService
SM only.PPPoE Service Name
scalarOctetString.1.3.6.1.4.1.17713.21.3.4.3.13
networkWanPPPoEMTU
SM only.MTU size to be used for PPPoE connection
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.15
networkWanPPPoEKeepAlive
SM only.Time in seconds for the keep Alive messages from PPPoE client to PPPoE Server
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.16
networkWanPPPoEMSSClamping
SM only.Enable or disable MSS Clamping 0 - Disable 1 - Enable
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.17
networkWanPPPoEAttempts
SM only.Maximum number of echo attempts before considering the link to be dead
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.18
networkWanIPAddr
SM NAT WAN IP Address Device Allocation: SM
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.21.3.4.3.2
networkWanNetmask
SM NAT WAN IP Subnet Mask Device Allocation: SM
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.21.3.4.3.3
networkWanIPv6AddressMode
SM NAT WAN IPv6 Address Mode 0 - Local, 1 - Static, 2 - DHCPv6, 3 - SLAAC Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.30
networkWanIPv6Addr
SM NAT WAN IPv6 Address Device Allocation: SM
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.17713.21.3.4.3.31
networkWanGatewayIPv6
SM NAT WAN IPv6 Gateway Address Device Allocation: SM
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.17713.21.3.4.3.32
networkWanIPv6LocalInterfaceId
SM NAT WAN IPv6 Local Interface Identifier Set the local 64-bit interface identifier. The identifier must be specified in standard ASCII notation of IPv6 addresses (for example: :…
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.17713.21.3.4.3.33
networkWanGatewayIP
SM NAT WAN Gateway IP Address Device Allocation: SM
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.21.3.4.3.4
networkWanDNSIPAddr obsolete
SM NAT WAN DNS Server IP Address Device Allocation: SM
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.21.3.4.3.5
networkWanMTU
SM NAT WAN MTU size For 802.11n and Force devices maximum value is 1700 Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.6
networkWanDNSIPAddrPrimary
SM NAT WAN DNS Server IP Address Device Allocation: SM Primary Server IP
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.21.3.4.3.7
networkWanDNSIPAddrSecondary
SM NAT WAN DNS Server IP Address Device Allocation: SM Secondary Server IP
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.17713.21.3.4.3.8
networkWanPPPoE
SM only.Enable or Disable PPPoE mode. 1 is enable 0 is disable
scalarInteger32.1.3.6.1.4.1.17713.21.3.4.3.9