networkWanPPPoEAttempts
CAMBIUM-PMP80211-MIB ·
.1.3.6.1.4.1.17713.21.3.4.3.18
Object
scalar
r/w
Integer32
SM only.Maximum number of echo attempts before considering the link to be dead
Context
- MIB
- CAMBIUM-PMP80211-MIB
- OID
.1.3.6.1.4.1.17713.21.3.4.3.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- networkWan
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| networkWanIPAddressMode SM NAT WAN IP Address Mode
1 - Static,
2 - DHCP
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.1 |
| networkWanPPPoEUsername SM only. Username to authenticate with
PPPoE Server.
Only private community can read this attribute. | scalar | OctetString | .1.3.6.1.4.1.17713.21.3.4.3.10 |
| networkWanPPPoEPassword SM only. Password to authenticate with
PPPoE Server.
Only private community can read this attribute. | scalar | OctetString | .1.3.6.1.4.1.17713.21.3.4.3.11 |
| networkWanPPPoEAC SM only.PPPoE Access Concentrator Name | scalar | OctetString | .1.3.6.1.4.1.17713.21.3.4.3.12 |
| networkWanPPPoEService SM only.PPPoE Service Name | scalar | OctetString | .1.3.6.1.4.1.17713.21.3.4.3.13 |
| networkWanPPPoEAuth SM only.This indicates type of authentication
with PPPoE Server. Options are
0 - All
1 - PAP
2 - CHAP | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.14 |
| networkWanPPPoEMTU SM only.MTU size to be used for PPPoE
connection | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.15 |
| networkWanPPPoEKeepAlive SM only.Time in seconds for the keep Alive
messages from PPPoE client to PPPoE
Server | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.16 |
| networkWanPPPoEMSSClamping SM only.Enable or disable MSS Clamping
0 - Disable
1 - Enable | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.17 |
| networkWanIPAddr SM NAT WAN IP Address
Device Allocation: SM | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.21.3.4.3.2 |
| networkWanNetmask SM NAT WAN IP Subnet Mask
Device Allocation: SM | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.21.3.4.3.3 |
| networkWanIPv6AddressMode SM NAT WAN IPv6 Address Mode
0 - Local,
1 - Static,
2 - DHCPv6,
3 - SLAAC
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.30 |
| networkWanIPv6Addr SM NAT WAN IPv6 Address
Device Allocation: SM | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.17713.21.3.4.3.31 |
| networkWanGatewayIPv6 SM NAT WAN IPv6 Gateway Address
Device Allocation: SM | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.17713.21.3.4.3.32 |
| networkWanIPv6LocalInterfaceId SM NAT WAN IPv6 Local Interface Identifier
Set the local 64-bit interface identifier.
The identifier must be specified in standard ASCII notation of IPv6 addresses
(for example: :… | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.17713.21.3.4.3.33 |
| networkWanGatewayIP SM NAT WAN Gateway IP Address
Device Allocation: SM | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.21.3.4.3.4 |
| networkWanDNSIPAddr obsolete SM NAT WAN DNS Server IP Address
Device Allocation: SM | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.21.3.4.3.5 |
| networkWanMTU SM NAT WAN MTU size
For 802.11n and Force devices maximum value is 1700
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.6 |
| networkWanDNSIPAddrPrimary SM NAT WAN DNS Server IP Address
Device Allocation: SM
Primary Server IP | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.21.3.4.3.7 |
| networkWanDNSIPAddrSecondary SM NAT WAN DNS Server IP Address
Device Allocation: SM
Secondary Server IP | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.21.3.4.3.8 |
| networkWanPPPoE SM only.Enable or Disable PPPoE
mode. 1 is enable 0 is disable | scalar | Integer32 | .1.3.6.1.4.1.17713.21.3.4.3.9 |