cambiumpmp80211ConfigurationState
CAMBIUM-PMP80211-MIB ·
.1.3.6.1.4.1.17713.21.4.6
Object
scalar
Integer32
System configuration state OID. Bit masks: 0000 0001 - System is configured. 0000 0010 - There are unsaved changesets. 0000 0100 - There are unrestarted services. 0000 1000 - Needed reboot of the system. 0001 0000 - Configurations was reset. 0010 0000 - Services restarting in process. 0100 0000 - Software Update performed. 1000 0000 - IP Address or protocol was changed. Device Allocation: AP, SM
Context
- MIB
- CAMBIUM-PMP80211-MIB
- OID
.1.3.6.1.4.1.17713.21.4.6- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- cambiumpmp80211SystemActions
- Siblings
- 47
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cambiumpmp80211DeviceReboot OID for Device Reboot, send reboot command to device
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.1 |
| cambiumpmp80211STAListUpdateStatus Sta List Update Status OID.
This OID is used to indicate SM list table status:
0 - No SMs are registerd to AP
1 - SM List Table is getting updated
2 - SM Data is ready
Device A… | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.10 |
| cambiumpmp80211APListUpdate System OID for AP List update
When this OID is received,
Scanned AP list table is getting updated with actual AP scan list
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.11 |
| cambiumpmp80211APListUpdateStatus AP List Update Status OID.
This OID is used to indicate AP list table status:
0 - No APs are available in the list
1 - AP List Table is getting updated
2 - AP Data is ready
Dev… | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.12 |
| cambiumpmp80211SoftwareUpdateError Software Update error code:
0 - Finished successfully, waiting for reboot.
1 - SW update file download failed.
2 - Unpack failed, damaged or wrong format package.
3 - Firmware dig… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.4.13 |
| cambiumpmp80211StatsPerSTAListUpdateStatus Stats per SM List Update Status OID.
This OID is used to indicate Stats per SM list table status:
0 - No SMs are registerd to AP
1 - TBD
2 - TBD | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.14 |
| cambiumpmp80211StatsPerSTAListUpdate System OID for Stats per SM table update
When this OID is received,
Stats per SM table is getting updated with actual data | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.15 |
| cambiumpmp80211STADisconnect System OID for particular SM disconnection
Device Allocation: AP | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.16 |
| cambiumpmp80211GPSAutopopulate System action to auto-populate GPS stats for device
into system configuration
device location for latitude, longitude and height
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.17 |
| cambiumpmp80211SoftwareUpdateErrorStr Software Update error, text descriprion | scalar | OctetString | .1.3.6.1.4.1.17713.21.4.18 |
| cambiumpmp80211GpsFirmwareUpdate System OID for GPS Firmware Update Agent,
Gps FW Update link value can be either remote firmware link (http, https, ftp),
or local file link: /tmp/firmware.tar.gz
NOTE: Device is … | scalar | OctetString | .1.3.6.1.4.1.17713.21.4.19 |
| cambiumpmp80211ConfigurationReset OID for System Configuration reset to Defaults
Device Allocation: AP, SM
Use bitmask to enable options:
set 0-th bit to 1 to do reset at all (001b)
set 1-st bit to 1 to preserve l… | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.2 |
| cambiumpmp80211GpsFirmwareUpdateError Firmware Update error code:
0 - Finished successfully
1 - SW update file download failed
2 - Unpack failed, damaged or wrong format package, or file access error
3 - GPS Firmware … | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.21 |
| cambiumpmp80211GpsFirmwareUpdateErrorStr GPS Firmware Update error, text description | scalar | OctetString | .1.3.6.1.4.1.17713.21.4.22 |
| cambiumBridgeTableAPStatus AP Bridge Table Update Status OID.
This OID is used to indicate bridge table status:
0 - Bridge table is empty
1 - Bridge table is filled with data
2 - AP Data is ready
Device … | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.25 |
| cambiumBridgeTableSTAUpdate System OID for AP Bridge Table update.
When this OID is received, bridge table is getting updated with actual
bridge table list
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.26 |
| cambiumBridgeTableSTAStatus Bridge Table Update Status OID.
This OID is used to indicate bridge table status:
0 - Bridge table is empty
1 - Bridge table is filled with data
2 - SM Data is ready
Device All… | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.27 |
| cambiumBridgeTableAPUpdate System OID for Bridge Table update.
When this OID is received, bridge table is getting updated with actual
bridge table list
Device Allocation: AP | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.28 |
| cambiumpmp80211ConfigurationSave OID for configuration save
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.3 |
| cambiumForceTabUpdDHCP Force update DHCP Host table,
1 - Force action
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.30 |
| cambiumForceTabUpdTrap Force update SNMP Trap table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.31 |
| cambiumForceTabUpdl2Frw Force update l2 Firewal table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.32 |
| cambiumForceTabUpdl3Frw Force update l3 Firewal table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.33 |
| cambiumForceTabUpdQos Force update Quality of Service table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.34 |
| cambiumForceTabUpdPortFw Force update Port Forwarding table,
1 - Force action
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.35 |
| cambiumForceTabUpdVlan Force update Membership VLAN table,
1 - Force action
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.36 |
| cambiumForceTabUpdMappingVlan Force update VLAN Mapping table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.37 |
| cambiumConfigurationApplyOnReboot OID for configuration Apply
on stage of device reboot.
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.38 |
| cambiumForceSTARescan force a STA rescan,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.39 |
| cambiumpmp80211ConfigurationApply OID for configuration Apply
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.4 |
| cambiumForceTabUpdMcastDeny Force update Multicast deny table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.40 |
| cambiumForceTabUpdStaticRoutesCnf Force update Static Routes Conf table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.41 |
| cambiumForceTabUpdMIR Force update MIR table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.42 |
| cambiumForceTabUpdRadiusServ Force update Radius Server table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.43 |
| cambiumForceTabUpdPrefAPList Force update Preferred AP list table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.44 |
| cambiumForceTabUpdAPAlias Force update AP Alias table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.45 |
| cambiumForceTabUpdPortFwSepMangIP Force update Separate Management IP Port Forwarding table,
1 - Force action
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.46 |
| cambiumAPListFlush Command stops scan and flush AP scan list,
Related to cambiumSTAConnectedAPTable.
1 - Force action
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.47 |
| cambiumCCTVListUpdate System OID for CCTV List update
When this OID is received,
Scanned CCTV list table is updated with actual CCTV scan list
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.48 |
| cambiumCCTVListUpdateStatus CCTV List Update Status OID.
This OID is used to indicate CCTV list table status:
0 - No CCTVs are available in the list
1 - CCTV List Table is getting updated
2 - CCTV Data is… | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.49 |
| cambiumpmp80211ConfigurationDiscard OID for configuration Discard
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.5 |
| cambiumCCTVListFlush Command flush CCTV scan list,
Related to cambiumONVIFTable.
1 - Force action
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.50 |
| cambiumForceTabUpdSwitch Force update for lanSwitchPortTable,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.51 |
| cambiumForceTabUpdDPIQoSApp Force update DPI QoS Application table,
1 - Force action
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.52 |
| cambiumpmp80211SoftwareUpdate System OID for Software Update Agent,
SW Update link value can be either remote firmware link (http, https, ftp),
or local file link: /tmp/firmware.tar.gz
NOTE: Device is automati… | scalar | OctetString | .1.3.6.1.4.1.17713.21.4.7 |
| cambiumpmp80211SoftwareUpdateStatus Software Update Status OID
0 - No SW Update is pending or No SW upgrade occurs,
1 - SW Update is in progress, Uploading image to device,
2 - SW Update is in progress, Verifying SH… | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.8 |
| cambiumpmp80211STAListUpdate System OID for SM List update
When this OID is received,
Connected SM list table is getting updated with actual SM list
Device Allocation: AP | scalar | Integer32 | .1.3.6.1.4.1.17713.21.4.9 |