cambiumSTADropReason

CAMBIUM-PMP80211-MIB · .1.3.6.1.4.1.17713.21.1.2.61
MIB view Table view

Object

scalar OctetString 
AP Reject reasons:
1 - Max capacity reached
2 - Software versions incompatible
3 - ACL policy
4 - STA in blacklist
5 - Other reason
6 - STA ranging failed
7 - Malformed INAR
8 - ePMP Elevate license exceeded
STA Association failure reasons:
16 - INA retries exhausted
17 - Out of cell
18 - Error prop delay calculation
19 - Lost AID
20 - Authentication failed
21 - Certificate check failed
22 - Generic auth fail
23 - MAC versions incompatible
24 - INA response not received
25 - Frame duration not supported
30 - AP doesn't support reject reason
STA Disassociation reasons:
32 - No allocation on AP
33 - GPFs miss
34 - BEACONs miss
35 - STA has detected radar (ETSI)
36 - STA initiated disconnect
37 - AP parameters changed
38 - Elevate auth failed due to packet loss
39 - AP initiated disconnect by peer radio
40 - STA KeepAlive RX stuck
41 - Reconnect to Primary AP
AP Disassociation reasons:
48 - Communication loss
49 - Invalid key
50 - Operator initiated disconnect
51 - AP initiated disconnect
52 - INAC miss timeout
53 - AP KeepAlive RX stuck
54 - AP Detected Radar
55 - BSR miss
56 - Group key update timeout

Context

MIB
CAMBIUM-PMP80211-MIB
OID
.1.3.6.1.4.1.17713.21.1.2.61
Type
scalar
Access
readonly
Status
current
Parent
cambiumRFStatus
Siblings
46

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-64

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cambiumSTAConnectedRFFrequency
The frequency connected to AP Device Allocation: AP, SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.1
cambiumAPNumberOfConnectedSTA
Number Of connected stations Device Allocation: AP
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.10
cambiumSTA2ConnectedRFFrequency
Second Radio The frequency connected to AP Device Allocation: AP, SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.101
cambiumSTA2ConnectedRFBandwidth
Second Radio Connected RF Bandwidth: 1 for 20 MHz, 2 for 40 MHz, 3 for 10 MHz, 4 for 5 MHz, 5 for 80 MHz Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.102
cambiumSTA2DLRSSI
Second Radio SM RSSI in dBm Device Allocation: SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.103
cambiumSTA2ConductedTXPower
Second Radio Current TX Power (Board Output Conducted) in dBm Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.105
cambiumSTA2UplinkMCSMode
Second Radio UL MCS Mode: This parameter represents Uplink MCS mode number for both 802.11n and 802.11ac standard devices. 802.11n HW: 1 for MCS1, 2 for MC…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.106
cambiumSTA2DownlinkMCSMode
Second Radio DL MCS Mode: This parameter represents Downlink MCS mode number for both 802.11n and 802.11ac standard devices. 802.11n HW: 1 for MCS1, 2 for …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.107
cambiumSTA2ConnectedAP
Second Radio Connected AP Name (SSID), If no AP is connected, Scanning should be returned Device Allocation: SM
scalarOctetString.1.3.6.1.4.1.17713.21.1.2.108
cambiumAPConnectedSTAListTable obsolete
This table contains information relevant to the Connected Subscriber Modules: Subscriber Module MAC Address, Subscriber Module AID, Subscriber Module Channel, UL RSSI per SM, DL R…
table-.1.3.6.1.4.1.17713.21.1.2.11
cambiumSTA2DLSNR
Second Radio SM SNR in dBm Device Allocation: SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.118
cambiumConnectedAP2MACAddress
Second Radio Connected AP MAC Address Device Allocation: SM
scalarOctetString.1.3.6.1.4.1.17713.21.1.2.119
cambiumSTADistanceKm
The distance between AP and SM in kilometers Device Allocation: SM
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.17713.21.1.2.12
sta2TxCapacity
Second Radio TX Capacity for SM Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.121
sta2TxQuality
Second Radio TX Quality for SM Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.122
cambiumRSSI2Ch0
Second radio RSSI at chain 0 in dBm Device Allocation: AP (PTP mode), SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.124
cambiumRSSI2Ch1
Second radio RSSI at chain 1 in dBm Device Allocation: AP (PTP mode), SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.125
cambiumSTADistanceMil
The distance between AP and SM in miles Device Allocation: SM
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.17713.21.1.2.13
cambiumPropagationDelay
SM use the calculated propagation delay to adjust the UL starting time Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.14
cambiumSTAConnectedAPListTable obsolete
This table contains information relevant to the Connected Subscriber Modules: SSID - AP Name (SSID) BSSID - AP MAC Address Channel - Operating channgel number Frequency - AP Opera…
table-.1.3.6.1.4.1.17713.21.1.2.15
wirelessInterfaceConnectionState
Connection State: 1 - Scanning, 2 - Connecting, 3 - Connected Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.16
cambiumSTAPriority
SM priority value: 0 - Normal, 1 - High, 2 - Low Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.17
cambiumSTADLSNR
SM SNR in dBm Device Allocation: SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.18
cambiumConnectedAPMACAddress
Connected AP MAC Address Device Allocation: SM
scalarOctetString.1.3.6.1.4.1.17713.21.1.2.19
cambiumSTAConnectedRFBandwidth
Connected RF Bandwidth: 1 for 20 MHz, 2 for 40 MHz, 3 for 10 MHz, 4 for 5 MHz, 5 for 80 MHz Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.2
cambiumSTAConnectedAPTable
This table contains information relevant to the Connected Subscriber Modules: SSID - AP Name (SSID) BSSID - AP MAC Address Channel - Operating channgel number Frequency - AP Opera…
table-.1.3.6.1.4.1.17713.21.1.2.20
staTxCapacity
TX Capacity for SM Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.21
staTxQuality
TX Quality for SM Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.22
cambiumePMPElevateConnected
Number of ePMP Elevate HW is connected to ePMP AP Device Allocation: AP
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.23
cambiumRSSICh0
Device RSSI at chain 0 in dBm Device Allocation: AP (PTP mode), SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.24
cambiumRSSICh1
Device RSSI at chain 1 in dBm Device Allocation: AP (PTP mode), SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.25
cambiumSTADLRSSI
SM RSSI in dBm Device Allocation: SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.3
cambiumAPConnectedSTATable
This table contains information relevant to the Connected Subscriber Modules: Subscriber Module MAC Address, Subscriber Module AID, Subscriber Module Channel, UL RSSI per SM, DL R…
table-.1.3.6.1.4.1.17713.21.1.2.30
cambiumSTADLCINR obsolete
SM CINR in dBm Device Allocation: SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.4
cambiumAPBridgeTable
This table contains information relevant to the particular AP bridge interfaces list: Bridge Name, Device MAC Address, Device Port, SM MAC Address, Aging Time in seconds Devi…
table-.1.3.6.1.4.1.17713.21.1.2.40
cambiumSTAConductedTXPower
Current TX Power (Board Output Conducted) in dBm Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.5
cambiumSTABridgeTable
This table contains information relevant to the particular SM bridge interfaces list: Bridge Name, Device MAC Address, Device Port, Aging Time in seconds Device Allocation: SM
table-.1.3.6.1.4.1.17713.21.1.2.50
cambiumSTAUplinkMCSMode
UL MCS Mode: This parameter represents Uplink MCS mode number for both 802.11n and 802.11ac standard devices. And Uplink MCS Rate for 802.11ax standard devices. 802.11n…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.6
cambiumSTAMAC
String with dropped SM's MAC address Device Allocation: AP
scalarOctetString.1.3.6.1.4.1.17713.21.1.2.60
cambiumNetworkEntryFailureSTAMAC
String with rejected SM's MAC Device Allocation: AP
scalarOctetString.1.3.6.1.4.1.17713.21.1.2.62
cambiumNetworkEntryFailureReason
AP Reject reasons: 1 - Max capacity reached 2 - Software versions incompatible 3 - PTP mode (ACL policy) 4 - STA in blacklist 5 - Other reason 6 - STA ranging failed 7 - Malformed…
scalarOctetString.1.3.6.1.4.1.17713.21.1.2.63
wirelessLinkDroppedCount
Aggregated number of link SM <-> AP dropped Device Allocation: AP, SM
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.64
cambiumMUMIMOGainAggregated
MU gain aggregated from all associated SMs Device Allocation: AP
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.65
cambiumSTADownlinkMCSMode
DL MCS Mode: This parameter represents Downlink MCS mode number for both 802.11n and 802.11ac standard devices. And Uplink MCS Rate for 802.11ax standard devices. 802.1…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.17713.21.1.2.7
cambiumSTAConnectedAP
Connected AP Name (SSID), If no AP is connected, Scanning should be returned Device Allocation: SM
scalarOctetString.1.3.6.1.4.1.17713.21.1.2.8
cambiumSTAPowerControlMode
Power Control Mode on SM: -1 - No Value, 0 - Disable, 1 - Open Loop, 2 - Close Loop Device Allocation: SM
scalarInteger32.1.3.6.1.4.1.17713.21.1.2.9