cambiumSTAConnectedAPTable
CAMBIUM-PMP80211-MIB ·
.1.3.6.1.4.1.17713.21.1.2.20
Object
table
This table contains information relevant to the Connected Subscriber Modules: SSID - AP Name (SSID) BSSID - AP MAC Address Channel - Operating channgel number Frequency - AP Operating frequency Bandwitdth - AP Operating Bandwidth Rate - AP Operating Rate SNR - AP Signal to Noise Ratio RSSI - AP Received Signal Strength Indication Noise - AP Noise level INT - Beacon Interval NE_ST - Last Network Entry State NE_AGE - Time from last Network Entry event SCAN_AGE - Time from last AP scanning Remaining_SM - Capacity on AP from beacon CAPS - IEEE80211 capability flags MeetNEAttemptCriteria - status for eachAP after scanning Device Allocation: SM
Context
- MIB
- CAMBIUM-PMP80211-MIB
- OID
.1.3.6.1.4.1.17713.21.1.2.20- Type
- table
- Status
- current
- Parent
- cambiumRFStatus
- Siblings
- 46
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cambiumSTAConnectedRFFrequency The frequency connected to AP
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.1 |
| cambiumAPNumberOfConnectedSTA Number Of connected stations
Device Allocation: AP | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.10 |
| cambiumSTA2ConnectedRFFrequency Second Radio The frequency connected to AP
Device Allocation: AP, SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.101 |
| cambiumSTA2ConnectedRFBandwidth Second Radio Connected RF Bandwidth:
1 for 20 MHz,
2 for 40 MHz,
3 for 10 MHz,
4 for 5 MHz,
5 for 80 MHz
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.102 |
| cambiumSTA2DLRSSI Second Radio SM RSSI in dBm
Device Allocation: SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.103 |
| cambiumSTA2ConductedTXPower Second Radio Current TX Power (Board Output Conducted) in dBm
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.105 |
| cambiumSTA2UplinkMCSMode Second Radio UL MCS Mode:
This parameter represents Uplink MCS mode number for both 802.11n and 802.11ac standard devices.
802.11n HW:
1 for MCS1,
2 for MC… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.106 |
| cambiumSTA2DownlinkMCSMode Second Radio DL MCS Mode:
This parameter represents Downlink MCS mode number for both 802.11n and 802.11ac standard devices.
802.11n HW:
1 for MCS1,
2 for … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.107 |
| cambiumSTA2ConnectedAP Second Radio Connected AP Name (SSID), If no AP is connected, Scanning should be returned
Device Allocation: SM | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.108 |
| cambiumAPConnectedSTAListTable obsolete This table contains information relevant to the Connected Subscriber Modules:
Subscriber Module MAC Address,
Subscriber Module AID,
Subscriber Module Channel,
UL RSSI per SM,
DL R… | table | - | .1.3.6.1.4.1.17713.21.1.2.11 |
| cambiumSTA2DLSNR Second Radio SM SNR in dBm
Device Allocation: SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.118 |
| cambiumConnectedAP2MACAddress Second Radio Connected AP MAC Address
Device Allocation: SM | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.119 |
| cambiumSTADistanceKm The distance between AP and SM in kilometers
Device Allocation: SM | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.17713.21.1.2.12 |
| sta2TxCapacity Second Radio TX Capacity for SM
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.121 |
| sta2TxQuality Second Radio TX Quality for SM
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.122 |
| cambiumRSSI2Ch0 Second radio RSSI at chain 0 in dBm
Device Allocation: AP (PTP mode), SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.124 |
| cambiumRSSI2Ch1 Second radio RSSI at chain 1 in dBm
Device Allocation: AP (PTP mode), SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.125 |
| cambiumSTADistanceMil The distance between AP and SM in miles
Device Allocation: SM | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.17713.21.1.2.13 |
| cambiumPropagationDelay SM use the calculated propagation delay to adjust the UL starting time
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.14 |
| cambiumSTAConnectedAPListTable obsolete This table contains information relevant to the Connected Subscriber Modules:
SSID - AP Name (SSID)
BSSID - AP MAC Address
Channel - Operating channgel number
Frequency - AP Opera… | table | - | .1.3.6.1.4.1.17713.21.1.2.15 |
| wirelessInterfaceConnectionState Connection State:
1 - Scanning,
2 - Connecting,
3 - Connected
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.16 |
| cambiumSTAPriority SM priority value:
0 - Normal,
1 - High,
2 - Low
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.17 |
| cambiumSTADLSNR SM SNR in dBm
Device Allocation: SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.18 |
| cambiumConnectedAPMACAddress Connected AP MAC Address
Device Allocation: SM | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.19 |
| cambiumSTAConnectedRFBandwidth Connected RF Bandwidth:
1 for 20 MHz,
2 for 40 MHz,
3 for 10 MHz,
4 for 5 MHz,
5 for 80 MHz
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.2 |
| staTxCapacity TX Capacity for SM
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.21 |
| staTxQuality TX Quality for SM
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.22 |
| cambiumePMPElevateConnected Number of ePMP Elevate HW is connected to ePMP AP
Device Allocation: AP | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.23 |
| cambiumRSSICh0 Device RSSI at chain 0 in dBm
Device Allocation: AP (PTP mode), SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.24 |
| cambiumRSSICh1 Device RSSI at chain 1 in dBm
Device Allocation: AP (PTP mode), SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.25 |
| cambiumSTADLRSSI SM RSSI in dBm
Device Allocation: SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.3 |
| cambiumAPConnectedSTATable This table contains information relevant to the Connected Subscriber Modules:
Subscriber Module MAC Address,
Subscriber Module AID,
Subscriber Module Channel,
UL RSSI per SM,
DL R… | table | - | .1.3.6.1.4.1.17713.21.1.2.30 |
| cambiumSTADLCINR obsolete SM CINR in dBm
Device Allocation: SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.4 |
| cambiumAPBridgeTable This table contains information relevant to the particular AP bridge
interfaces list:
Bridge Name,
Device MAC Address,
Device Port,
SM MAC Address,
Aging Time in seconds
Devi… | table | - | .1.3.6.1.4.1.17713.21.1.2.40 |
| cambiumSTAConductedTXPower Current TX Power (Board Output Conducted) in dBm
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.5 |
| cambiumSTABridgeTable This table contains information relevant to the particular SM bridge
interfaces list:
Bridge Name,
Device MAC Address,
Device Port,
Aging Time in seconds
Device Allocation: SM | table | - | .1.3.6.1.4.1.17713.21.1.2.50 |
| cambiumSTAUplinkMCSMode UL MCS Mode:
This parameter represents Uplink MCS mode number for both 802.11n and 802.11ac standard devices.
And Uplink MCS Rate for 802.11ax standard devices.
802.11n… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.6 |
| cambiumSTAMAC String with dropped SM's MAC address
Device Allocation: AP | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.60 |
| cambiumSTADropReason AP Reject reasons:
1 - Max capacity reached
2 - Software versions incompatible
3 - ACL policy
4 - STA in blacklist
5 - Other reason
6 - STA ranging failed
7 - Malformed INAR
8 - e… | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.61 |
| cambiumNetworkEntryFailureSTAMAC String with rejected SM's MAC
Device Allocation: AP | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.62 |
| cambiumNetworkEntryFailureReason AP Reject reasons:
1 - Max capacity reached
2 - Software versions incompatible
3 - PTP mode (ACL policy)
4 - STA in blacklist
5 - Other reason
6 - STA ranging failed
7 - Malformed… | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.63 |
| wirelessLinkDroppedCount Aggregated number of link SM <-> AP dropped
Device Allocation: AP, SM | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.64 |
| cambiumMUMIMOGainAggregated MU gain aggregated from all associated SMs
Device Allocation: AP | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.65 |
| cambiumSTADownlinkMCSMode DL MCS Mode:
This parameter represents Downlink MCS mode number for both 802.11n and 802.11ac standard devices.
And Uplink MCS Rate for 802.11ax standard devices.
802.1… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.21.1.2.7 |
| cambiumSTAConnectedAP Connected AP Name (SSID), If no AP is connected, Scanning should be returned
Device Allocation: SM | scalar | OctetString | .1.3.6.1.4.1.17713.21.1.2.8 |
| cambiumSTAPowerControlMode Power Control Mode on SM:
-1 - No Value,
0 - Disable,
1 - Open Loop,
2 - Close Loop
Device Allocation: SM | scalar | Integer32 | .1.3.6.1.4.1.17713.21.1.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cambiumSTAConnectedAPEntry Wireless parameters mapping for particular station.
Device Allocation: SM | row | - | .1.3.6.1.4.1.17713.21.1.2.20.1 |