portCallState
CALISTA-DPA-MIB ·
.1.3.6.1.4.1.7505.1.1.15.1.5
Object
column
mandatory
Enumeration
Once a port's required link(s) to an Octel / PBX and CallManager have become active, it then becomes available for use placing calls between the two realms. This entry shows the current state of any active call for a port, as described in the DPA Administration Guide.
Context
- MIB
- CALISTA-DPA-MIB
- OID
.1.3.6.1.4.1.7505.1.1.15.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- portEntry
- Table
- portTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | notApplicable |
3 | onHook |
4 | callIn |
5 | callOut |
6 | onCall |
7 | offHook |
8 | transfer |
9 | outCall |
10 | hangingUp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portIndex mandatory A unique value for each port. Its value ranges from
1 to the total number of ports. | column | Integer32 | .1.3.6.1.4.1.7505.1.1.15.1.1 |
| portType mandatory How this port is currently being used:
notInUse not currently in use (may become active later)
octel connected to an Octel voicemail system
pbx connected to a dig… | column | Enumeration | .1.3.6.1.4.1.7505.1.1.15.1.2 |
| portTelephonyLinkState mandatory The state of the digital telephony link. This field only has
meaning for physical ports connected to Octel voicemail systems
or digital PBX systems. For virtual ports or those cur… | column | Enumeration | .1.3.6.1.4.1.7505.1.1.15.1.3 |
| portCallManagerLinkState mandatory The state of this port's connection to a Cisco CallManager,
if such a connection exists. For ports connected to digital
PBX systems (see the portType entry) this will be returned … | column | Enumeration | .1.3.6.1.4.1.7505.1.1.15.1.4 |
| portDeviceName mandatory The device name under which this port is registered with
Cisco CallManager. | column | DisplayString | .1.3.6.1.4.1.7505.1.1.15.1.6 |
| portCodecInUse mandatory If there is a call in progress on this port, this entry gives
the codec in use, otherwise it will return none. | column | Enumeration | .1.3.6.1.4.1.7505.1.1.15.1.7 |
| portErrors mandatory The number of centiseconds during which PBX protocol errors
were detected for this port. It is normal for there to be
some errors, especially during port initialization, but very
… | column | Integer32 | .1.3.6.1.4.1.7505.1.1.15.1.8 |
| portDacLevel mandatory The DAC level for the port; this is related to the voltage
level on the digital telephony port, and is only used in
diagnosis of internal hardware faults. | column | Integer32 | .1.3.6.1.4.1.7505.1.1.15.1.9 |