cadDQoSAuthFlowSpecPeakRatep
CADANT-DQOS-GATE-MIB ·
.1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.4
Object
Parameter 'p' in TSpec leaky bucket description.
The maximum transmission rate limits how fast packets
may be sent back to back from the host. Consider that
if the token bucket is full, it is possible for the
flow to send a series of back-to-back packets equal
to the size of the token bucket.
At all times, 'p' MUST be greater than or equal to the
token bucket rate, 'r'.
Context
- MIB
- CADANT-DQOS-GATE-MIB
- OID
.1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bits per second
- Parent
- cadDQoSAuthFlowSpecEntry
- Table
- cadDQoSAuthFlowSpecTable
- Siblings
- 8
Syntax
bits per second SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadDQoSAuthFlowSpecIdx Index of flow specification within Gate | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.1 |
| cadDQoSAuthFlowSpecBucketDepthb Parameter 'b' in TSpec leaky bucket description.
The token bucket size controls the maximum amount
of data that the flow can send at the peak rate.
More formally, i… | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.2 |
| cadDQoSAuthFlowSpecBucketRater Parameter 'r' in TSpec leaky bucket description.
The token bucket rate is the rate at which credits
are placed into an imaginary token bucket. For each
flow, a sep… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.3 |
| cadDQoSAuthFlowSpecMinPolicedUnitm Parameter 'm' in TSpec leaky bucket description.
All IP datagrams less than size 'm' will be counted,
when policed and tested for conformance to the TSpec,
as being… | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.5 |
| cadDQoSAuthFlowSpecMaxPktSizeM Parameter 'M' in TSpec leaky bucket description.
This is the maximum packet size (including IP and header
layers) that can be generated by the source. | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.6 |
| cadDQoSAuthFlowSpecReservedRateR Parameter 'R' in RSpec.
A service accepting an invocation request may be thought
of as entering into a contract to provide the service
described by the RSpec as lon… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.7 |
| cadDQoSAuthFlowSpecSlackTermS Parameter 'S' in RSpec.
This is the maximum amount of slack (in microseconds) that
can be added to the inherent delay to produce an acceptable
delay bound. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.8 |
| cadDQoSAuthFlowSpecSubscriberID The Subscriber-ID identifies the subscriber (cable modem) for
this service request. Its main use is to prevent various
denial-of-service attacks. | column | CADANT-TCInetAddressIPv4or6 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.9 |