cadDQoSAuthFlowSpecMaxPktSizeM
CADANT-DQOS-GATE-MIB ·
.1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.6
Object
Parameter 'M' in TSpec leaky bucket description.
This is the maximum packet size (including IP and header
layers) that can be generated by the source.
Context
- MIB
- CADANT-DQOS-GATE-MIB
- OID
.1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Units
- octets
- Parent
- cadDQoSAuthFlowSpecEntry
- Table
- cadDQoSAuthFlowSpecTable
- Siblings
- 8
Syntax
octets SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadDQoSAuthFlowSpecIdx Index of flow specification within Gate | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.1 |
| cadDQoSAuthFlowSpecBucketDepthb Parameter 'b' in TSpec leaky bucket description.
The token bucket size controls the maximum amount
of data that the flow can send at the peak rate.
More formally, i… | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.2 |
| cadDQoSAuthFlowSpecBucketRater Parameter 'r' in TSpec leaky bucket description.
The token bucket rate is the rate at which credits
are placed into an imaginary token bucket. For each
flow, a sep… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.3 |
| cadDQoSAuthFlowSpecPeakRatep Parameter 'p' in TSpec leaky bucket description.
The maximum transmission rate limits how fast packets
may be sent back to back from the host. Consider that
if the … | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.4 |
| cadDQoSAuthFlowSpecMinPolicedUnitm Parameter 'm' in TSpec leaky bucket description.
All IP datagrams less than size 'm' will be counted,
when policed and tested for conformance to the TSpec,
as being… | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.5 |
| cadDQoSAuthFlowSpecReservedRateR Parameter 'R' in RSpec.
A service accepting an invocation request may be thought
of as entering into a contract to provide the service
described by the RSpec as lon… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.7 |
| cadDQoSAuthFlowSpecSlackTermS Parameter 'S' in RSpec.
This is the maximum amount of slack (in microseconds) that
can be added to the inherent delay to produce an acceptable
delay bound. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.8 |
| cadDQoSAuthFlowSpecSubscriberID The Subscriber-ID identifies the subscriber (cable modem) for
this service request. Its main use is to prevent various
denial-of-service attacks. | column | CADANT-TCInetAddressIPv4or6 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.9 |