cadDQoSAuthFlowSpecBucketDepthb
CADANT-DQOS-GATE-MIB ·
.1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.2
Object
Parameter 'b' in TSpec leaky bucket description.
The token bucket size controls the maximum amount
of data that the flow can send at the peak rate.
More formally, if the token bucket size is 'b' and
the token bucket rate is 'r', over any arbitrarily
chosen interval T in the life of the flow, the
amount of data that the flow sends cannot have
exceeded b + (r * T) bytes.
The bucket size limits how many credits the flow may
store. When the bucket is full, new credits are
discarded.
Context
- MIB
- CADANT-DQOS-GATE-MIB
- OID
.1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Units
- octets
- Parent
- cadDQoSAuthFlowSpecEntry
- Table
- cadDQoSAuthFlowSpecTable
- Siblings
- 8
Syntax
octets SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadDQoSAuthFlowSpecIdx Index of flow specification within Gate | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.1 |
| cadDQoSAuthFlowSpecBucketRater Parameter 'r' in TSpec leaky bucket description.
The token bucket rate is the rate at which credits
are placed into an imaginary token bucket. For each
flow, a sep… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.3 |
| cadDQoSAuthFlowSpecPeakRatep Parameter 'p' in TSpec leaky bucket description.
The maximum transmission rate limits how fast packets
may be sent back to back from the host. Consider that
if the … | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.4 |
| cadDQoSAuthFlowSpecMinPolicedUnitm Parameter 'm' in TSpec leaky bucket description.
All IP datagrams less than size 'm' will be counted,
when policed and tested for conformance to the TSpec,
as being… | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.5 |
| cadDQoSAuthFlowSpecMaxPktSizeM Parameter 'M' in TSpec leaky bucket description.
This is the maximum packet size (including IP and header
layers) that can be generated by the source. | column | octets SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.6 |
| cadDQoSAuthFlowSpecReservedRateR Parameter 'R' in RSpec.
A service accepting an invocation request may be thought
of as entering into a contract to provide the service
described by the RSpec as lon… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.7 |
| cadDQoSAuthFlowSpecSlackTermS Parameter 'S' in RSpec.
This is the maximum amount of slack (in microseconds) that
can be added to the inherent delay to produce an acceptable
delay bound. | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.8 |
| cadDQoSAuthFlowSpecSubscriberID The Subscriber-ID identifies the subscriber (cable modem) for
this service request. Its main use is to prevent various
denial-of-service attacks. | column | CADANT-TCInetAddressIPv4or6 | .1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.9 |