cadPCDownEmerResUsage
CADANT-CMTS-PACKETCABLE-MIB ·
.1.3.6.1.4.1.4998.1.1.115.1.1.11
Object
scalar
r/w
percent Integer32
Minimum percentage of downstream resources that may be used by emergency telephony services. If the value of this object is non-zero, then a portion of the upstream bandwidth will be set aside for normal telephony use only - reducing the bandwidth that is available for normal data.
Context
- MIB
- CADANT-CMTS-PACKETCABLE-MIB
- OID
.1.3.6.1.4.1.4998.1.1.115.1.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- percent
- Parent
- cadPCMibBase
- Siblings
- 43
Syntax
percent Integer32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadPCDownEmerAllowedUsage Maximum percentage of downstream resources that may be used by
emergency telephony services. | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.10 |
| cadPCCAMTable Table of Per-CAM PacketCable Data for 2D12U only | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.12 |
| cadPCAdminState The administrative state of PacketCable services on the CMTS. | scalar | CADANT-TCAdminState | .1.3.6.1.4.1.4998.1.1.115.1.1.13 |
| cadPCMaxOverloadCalls obsolete the max number of connections we will allow per 10 second interval
when the system cpu is in a normal condition, i.e. no overload. | scalar | connections per 10 seconds Unsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.1.14 |
| cadPCMaxYellowOverloadCalls obsolete the max number of connections we will allow per 10 second interval
when the system cpu is in a yellow overload condition. | scalar | connections per 10 seconds Unsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.1.15 |
| cadPCMaxRedOverloadCalls obsolete the max number of connections we will allow per 10 second interval
when the system cpu is in a red overload condition. | scalar | connections per 10 seconds Unsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.1.16 |
| cadPCDownTotalAllowedUsage Maximum percentage of downstream resources that may be
used by both normal and emergency telephony services. | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.17 |
| cadPCUpTotalAllowedUsage Maximum percentage of upstream resources that may be
used by both normal and emergency telephony services. | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.18 |
| cadPCMaxOverloadGateMsgs the max number of gate messages that the system will process per 10
second interval when the system cpu is in a normal condition, i.e.
no overload. | scalar | gate messages per 10 seconds Unsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.1.19 |
| cadPCMaxYellowOverloadGateMsgs the max number of gate messages that the system will process per 10
second interval when the system cpu is in a yellow overload condition. | scalar | gate messages per 10 seconds Unsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.1.20 |
| cadPCMaxRedOverloadGateMsgs the max number of gate messages that the system will process per 10
second interval when the system cpu is in a red overload condition. | scalar | gate messages per 10 seconds Unsigned32 | .1.3.6.1.4.1.4998.1.1.115.1.1.21 |
| cadPCClearGateCounts set to true to clear the gate counts, always false when read | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.25 |
| cadPCClearAnomalyCounts set to true to clear the anomaly counts, always false when read | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.26 |
| cadPCClearConnRateOverloadCounts set to true to clear the connection rate overload counts, always false when read | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.27 |
| cadPCClearEvMsgCounts set to true to clear the event messaging counts, always false when read | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.28 |
| cadPCClearCopsCounts set to true to clear the COPS counts, always false when read | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.29 |
| cadPCPreemptionAllowed Indicates whether the system will preempt another
session for an emergency call. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.3 |
| cadPCClearGateCtlCounts set to true to clear the gate control counts, always false when read | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.30 |
| cadPCUpNormAllowedUsage Maximum percentage of upstream resources that may be used by
non-emergency telephony services. This is also the maximum
amount of resources non-exclusively allocated to sessions … | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.4 |
| cadPCMibGateCounts | node | - | .1.3.6.1.4.1.4998.1.1.115.1.1.40 |
| cadPCAnomalyCountTable Table of anomaly counts | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.45 |
| cadPCAnomalyLastCleared The value of sysUptime when the anomaly counts were last cleared. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4998.1.1.115.1.1.46 |
| cadPCSendSubId Indicates whether the C4 will send a subscriber ID in every DQoS gate-open
and gate-close message. This is provisioned per-CMTS. ECN DQOS1.5-N-06.0339-4 | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.47 |
| cadPCUpNormResUsage Minimum percentage of upstream resources that may be used by
non-emergency telephony services. This is also the maximum amount
of resources exclusively allocated to sessions of t… | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.5 |
| cadPCConnRateReqHistoryTable Table of connection request rate history | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.50 |
| cadPCConnReqMaxHistRate Maximum value of any cadPCConnReqRateCount since system boot or
reset of this value. | scalar | gates SNMPv2-SMICounter32 | .1.3.6.1.4.1.4998.1.1.115.1.1.51 |
| cadPCConnRateOverloadRejTable Table of Per-card rate overload reject connection counts | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.55 |
| cadPCConnRateOverloadLastCleared The value of sysUptime when the connection rate overload counts were last cleared. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4998.1.1.115.1.1.56 |
| cadPCUpEmerAllowedUsage Maximum percentage of upstream resources that may be used by
emergency telephony services. | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.6 |
| cadPCEvMsgCountTable Table of counts of event messages that have been
transmitted to each RKS or DF (for Electronic Surveillance
Call Data) server | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.60 |
| cadPCEvMsgCountLastCleared The value of sysUptime when the event messaging counts were last cleared. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4998.1.1.115.1.1.61 |
| cadPCCopsCountTable Table of counts of event messages that have been
sent to or received from each server. | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.65 |
| cadPCCopsCountLastCleared The value of sysUptime when the COPS counts were last cleared. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4998.1.1.115.1.1.66 |
| cadPCUpEmerResUsage Minimum percentage of upstream resources that may be used by
emergency telephony services. If the value of this object is
non-zero, then a portion of the upstream bandwidth will … | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.7 |
| cadPCGateCtlCountTable Table of counts of event messages that have been
sent to or received from each server. | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.70 |
| cadPCGateCtlCountLastCleared The value of sysUptime when the gate control counts were last cleared. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4998.1.1.115.1.1.71 |
| cadPCDefAdmCtlTable Table of Per-Priority PacketCable admission
control policies | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.75 |
| cadPCDownNormAllowedUsage Maximum percentage of downstream resources that may be used by
non-emergency telephony services. This is also the maximum
amount of resources non-exclusively allocated to session… | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.8 |
| cadPC1xAdmCtlMapTable Table of mappings of PacketCable 1.x to PacketCable
Multimedia admission control policies | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.80 |
| cadPCInterfaceAdmCtlTable Table of Per-Priority PacketCable admission control
policies. There exists a row per cable downstream and
per cable upstream for each of the CadPCAdmCtlPriorities.
For 1D:8U CA… | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.85 |
| cadPCCAMCblMacTable Table of Per-CAM PacketCable Data | table | - | .1.3.6.1.4.1.4998.1.1.115.1.1.86 |
| cadPCDownNormResUsage Minimum percentage of downstream resources that may be used by
non-emergency telephony services. This is also the maximum amount
of resources exclusively allocated to sessions of… | scalar | percent Integer32 | .1.3.6.1.4.1.4998.1.1.115.1.1.9 |
| cadPCPEPIDHostname If set to true, the PEP-ID on the COPS connection will set to the currently
configured hostname of the CMTS. If false, the PEP-ID will will be set to
the local IP address of the … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.115.1.1.90 |