cadSshPublicKeyAuthRequired

CADANT-AAA-MIB · .1.3.6.1.4.1.4998.1.1.40.1.9.16
MIB view Table view

Object

scalar SNMPv2-TCTruthValue 
If cadSshPublicKeyAuthEnabled is set to true(1), then setting
cadSshPublicKeyAuthRequired to true(1) instructs the SSH server to require
public key authentication from connecting clients. If cadSshPublicKeyAuthRequired
is set to true(1) and this object it set to false(2), then public key
authentication may not be necessary as long as cadSshPasswordAuthEnabled is set
to true(1). Otherwise, if cadSshPublicKeyAuthEnabled is set to false(2), any
attempt to set cadSshPublicKeyAuthRequired to true(1) will be rejected. Setting
this object to false(2) will automatically cause cadSshPublicKeyAuthFirst to be
set to false(2).

Context

MIB
CADANT-AAA-MIB
OID
.1.3.6.1.4.1.4998.1.1.40.1.9.16
Type
scalar
Access
readonly
Status
current
Parent
cadSshConfig
Siblings
17

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cadSshEnabled
The current adminstative status of the SSH server. True implies the SSH server is active.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.1
cadSshPublicKey
The SSH server's public key.
scalarPemKey.1.3.6.1.4.1.4998.1.1.40.1.9.11
cadSshPrivateKey
The SSH server private key
scalarPemKey.1.3.6.1.4.1.4998.1.1.40.1.9.12
cadSshCiphers
SSH message encryption ciphers
scalarCADANT-TCSshCipher.1.3.6.1.4.1.4998.1.1.40.1.9.13
cadSshPortForwardingEnabled
Set this object to true(1) if SSH port forwarding is to be enabled. Otherwise, this object should be false(2) if SSH port forwarding is disabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.14
cadSshPasswordAuthRequired
If cadSshPasswordAuthEnabled is set to true(1), then setting cadSshPasswordAuthRequired to true(1) instructs the SSH server to require password authentication from connecting clie…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.15
cadSshPublicKeyAuthFirst
If both cadSshPublicKeyAuthEnabled and cadSshPublicKeyAuthRequired are set to true(1), then this object may set to true(1). Otherwise, attempts to set this object to true(1) will …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.17
cadSshMaxAuthFailures
The SSH server will reject clients who fail to authorize after this many attempts.
scalarUnsigned32.1.3.6.1.4.1.4998.1.1.40.1.9.18
cadSshServerKeyType
The SSH server key type (DSA-1024 or RSA-2048).
scalarCADANT-TCSshKeyType.1.3.6.1.4.1.4998.1.1.40.1.9.19
cadSshPort
Port on which the SSH server listens.
scalarInteger32.1.3.6.1.4.1.4998.1.1.40.1.9.2
cadSshKeyExchange
The SSH server key exhange method.
scalarCADANT-TCSshKeyExchangeMethod.1.3.6.1.4.1.4998.1.1.40.1.9.20
cadSshSessionIdleTimeout
Seconds the SSH server will allow an established connection to remain idle connection before terminating it. 0 implies an unlimited idle timeout.
scalarInteger32.1.3.6.1.4.1.4998.1.1.40.1.9.3
cadSshMaxClients
Maximum number of active SSH clients allowed by the SSH server. 0 implies the upper range of 20.
scalarInteger32.1.3.6.1.4.1.4998.1.1.40.1.9.4
cadSshPasswordAuthEnabled
True means that password authentication is allowed by the SSH server. False implies that public key authentication must be allowed. Setting this object fo false(2) will automatic…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.5
cadSshPublicKeyAuthEnabled
When true, the SSH server will allow clients to authenticate using a digital signature. If false, password authentication must be allowed. Setting this object to false(2) will au…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.6
cadSshCliLoginEnabled
When true, the SSH server will allow clients to login into the CLI.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.7
cadSshSecureFtpEnabled
When true, the SSH server will allow clients to establish secure ftp sessions.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4998.1.1.40.1.9.8