cadLineCommandAccountingPrivilegeLevel
CADANT-AAA-MIB ·
.1.3.6.1.4.1.4998.1.1.40.1.2.1.16
Object
column
Integer32
When command accounting is enabled, accounting records will be sent only for commands whose privilege level is greater than or equal to cadLineCommandAccountingPrivilegeLevel.
Context
- MIB
- CADANT-AAA-MIB
- OID
.1.3.6.1.4.1.4998.1.1.40.1.2.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cadLineEntry
- Table
- cadLineTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadLineIndex The line index corresponding to a console or vty line.
These are preallocated by the system at startup. | column | Integer32 | .1.3.6.1.4.1.4998.1.1.40.1.2.1.1 |
| cadLineEnableAuthMethodList The authentication methods used in allowing enable access on this line.
This is a partial index into the cadAuthMethodTable. An empty
string indicates no authentication is possib… | column | OctetString | .1.3.6.1.4.1.4998.1.1.40.1.2.1.10 |
| cadLineAuthorMethodList The authorization methods used in allowing different privledge levels
on this line. This is a partial index into the cadAuthorMethodTable.
An empty string indicates no authoriz… | column | OctetString | .1.3.6.1.4.1.4998.1.1.40.1.2.1.11 |
| cadLineShellAccountingMethodList The method list used for shell accounting.
An empty string indicates no command accounting is possible. | column | OctetString | .1.3.6.1.4.1.4998.1.1.40.1.2.1.12 |
| cadLineCommandAccountingMethodList The method list used for command accounting. Accounting will
be done only for commands whose privilege level is greater than or equal
to cadLineCommandAccountingPrivilegeLevel… | column | OctetString | .1.3.6.1.4.1.4998.1.1.40.1.2.1.13 |
| cadLineShellAccountingType Accounting type for shell accounting. The accounting type
is used to decide whether accounting records are sent at the initiation
and termination of a session or only at the te… | column | CADANT-TCAccountingType | .1.3.6.1.4.1.4998.1.1.40.1.2.1.14 |
| cadLineCommandAccountingType Accounting type for command accounting. The accounting type
is used to decide whether accounting records are sent at the initiation
and termination of a command or only at the … | column | CADANT-TCAccountingType | .1.3.6.1.4.1.4998.1.1.40.1.2.1.15 |
| cadLineType The type (vty or console) of the access line. | column | CADANT-TCLineType | .1.3.6.1.4.1.4998.1.1.40.1.2.1.2 |
| cadLineEnabled The status of the line. When enabled, the line is available
for access to the C4. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.40.1.2.1.3 |
| cadLineSessionTimeout Session length in seconds. The C4 automatically terminates the
the session when this interval expires. A value of zero indicates
no timeout. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.40.1.2.1.4 |
| cadLineIdleTimeout Maximum idle time in seconds. The C4 automatically terminates the
session if no I/O activity occurs within this interval. A value of
zero indicates no timeout. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.40.1.2.1.5 |
| cadLinePagination Number of lines of consecutive output to display before pausing
and prompting the user. A value of zero indicates no pagination. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.40.1.2.1.6 |
| cadLineBaud Baud rate in bits per second. This is applicable to console lines
only and is saved in the eeprom. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.40.1.2.1.7 |
| cadLinePassword The (encrypted) password associated with this line if line-based
authentication is active. This is the line password. | column | OctetString | .1.3.6.1.4.1.4998.1.1.40.1.2.1.8 |
| cadLineLoginAuthMethodList The authentication methods used in allowing login access on this line.
This is a partial index into the cadAuthMethodTable. An empty
string indicates no authentication is possibl… | column | OctetString | .1.3.6.1.4.1.4998.1.1.40.1.2.1.9 |