sRPCAllOutletsStatus
Baytech-MIB-403-1 ·
.1.3.6.1.4.1.4779.1.3.5.5.1.13
Object
Reports status of outlets in a comma deliminated string. 0 = off 1 = on 2 = reboot 3 = locked on 4 = locked off
Context
- MIB
- Baytech-MIB-403-1
- OID
.1.3.6.1.4.1.4779.1.3.5.5.1.13- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- sBTAModulesRPCModPortEntry
- Table
- sBTAModulesRPCModPortTable
- Siblings
- 24
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sRPCModuleIndex mandatory The module number index into the RPC table. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.1 |
| sRPCTemperature mandatory The temperature reading for the power strip. Readings are in degrees C.
If temperature measurement is not installed this value will always read 0. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.10 |
| sRPCRebootTimeout mandatory The length of off time for automatic reboot sequences.
Currently a read-only value set to the fixed reboot timeout. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.11 |
| sRPCAllOutletsCmd mandatory Turns all outlets on, off or reboot.
0 = off
1 = on
2 = reboot
3 = lockon (will lock outlets to on state)
4 = lockoff (will lock outlets to off state)
5 = unlock (will unlock all … | column | Enumeration | .1.3.6.1.4.1.4779.1.3.5.5.1.12 |
| sRPCCurrentAlarmThreshold mandatory The current alarm threshold level *10. A value of 105 will set the level to 10.5. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.14 |
| sRPCOverVoltageThreshold mandatory The over voltage alarm threshold level *10. A value of 105 will set the level to 10.5. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.15 |
| sRPCUnderVoltageThreshold mandatory The under voltage alarm threshold level *10. A value of 105 will set the level to 10.5. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.16 |
| sRPCNumberOfOutlets mandatory Number of outlets for this RPC.
This will be the size of outlet table for this RPC index. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.17 |
| sRPCCircuitBreaker mandatory Status of circuit breaker in power strip. 0=off 1=on. | column | Enumeration | .1.3.6.1.4.1.4779.1.3.5.5.1.18 |
| sRPCOverTempThreshold mandatory The over temperature alarm threshold level *10. A value of 505 will set the level to 50.5. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.19 |
| sRPCPortIndex mandatory The port number index into the RPC table. In the case of ds30 modules this number is always 1. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.2 |
| sRPCUnitVA mandatory Number of outlets for this RPC.
This will be the size of outlet table for this RPC index. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.20 |
| sRPCNumberOfBreakers mandatory Number of breakers for this RPC. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.21 |
| sRPCLowCurrentThreshold mandatory Low current threshold for this RPC. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.22 |
| sRPCVoltageSource mandatory Voltage source for this RPC. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.23 |
| sRPCSourceSwitchCount mandatory Voltage source switch count for this RPC. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.24 |
| sRPCNumberOfSensors mandatory Number of sensors for this RPC. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.25 |
| sRPCType mandatory Type of RPC at the module, port index. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4779.1.3.5.5.1.3 |
| sRPCName mandatory The name (unit id) of the rpc module. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4779.1.3.5.5.1.4 |
| sRPCFirmwareVersion mandatory The firware version of the rpc module. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.4779.1.3.5.5.1.5 |
| sRPCCurrent mandatory The current reading for the power strip.
If current measurement is not installed this value will always read 0. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.6 |
| sRPCMaxCurrent mandatory The maximum detected current reading for the power strip.
If current measurement is not installed this value will always read 0.
Setting this value to 0 will clear the maximum cur… | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.7 |
| sRPCVoltage mandatory The voltage reading for the power strip.
If voltage measurement is not installed this value will always read 0. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.8 |
| sRPCPower mandatory The power reading for the power strip.
If power measurement is not installed this value will always read 0. | column | Integer32 | .1.3.6.1.4.1.4779.1.3.5.5.1.9 |