wdmSlotIdx
BTI-OL-MIB ·
.1.3.6.1.4.1.18070.2.2.1.16.8.1.3
Object
column
Integer32
The number of the slot in which the WDM is located.
Context
- MIB
- BTI-OL-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.16.8.1.3- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- wdmEntry
- Table
- wdmTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-20
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wdmCpTypeIdx The type of circuit pack on which the WDM is located. | column | BTI-TC-MIBCpType | .1.3.6.1.4.1.18070.2.2.1.16.8.1.1 |
| wdmId Textual data recorded by the user to briefly identify the
WDM object in a manner useful to the user. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.16.8.1.10 |
| wdmRowStatus The WDM table RowStatus object is not readable or
writeable because all entries in the table are
automatically created and deleted when the supporting
DLA or ROB circuit pack is a… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.18070.2.2.1.16.8.1.100 |
| wdmCustom1 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.16.8.1.11 |
| wdmCustom2 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.16.8.1.12 |
| wdmCustom3 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.16.8.1.13 |
| wdmFiberType The fiber type of the span fiber. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.16.8.1.14 |
| wdmSpanLength The measured length of the receive span fiber. | column | kilometers SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.16.8.1.15 |
| wdmSpanLossRxHighTh The high threshold setting for the loss on the receive
fiber of the Line span. The setting for this object is
used to evaluate the olPortLossRxHighThCond trap. When
the value of t… | column | dB/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.16.8.1.16 |
| wdmSpanLossSpecMax The specified maximum supported loss on the Line span.
The value of this object is dependent on the optical
layer group configurations of the local and far-end nodes. | column | dB/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.16.8.1.17 |
| wdmNumChannels The actual number of channels that the WDM is currently
provisioned to carry. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.8.1.18 |
| wdmShelfIdx The number of the shelf in which the WDM is located. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.8.1.2 |
| wdmLineIdx The line number of the WDM. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.8.1.4 |
| wdmAdminStatus The administrative status of the WDM. The default value
is autoEnabled if the supporting equipment is enabled
or autoEnabled, otherwise it is disabled. | column | BTI-TC-MIBAdminStatus | .1.3.6.1.4.1.18070.2.2.1.16.8.1.5 |
| wdmOperStatus The reported operational status of the WDM. | column | BTI-TC-MIBOperStatus | .1.3.6.1.4.1.18070.2.2.1.16.8.1.6 |
| wdmOperStatQlfr This is a textual list of qualifiers about the reported
operational status of the WDM. | column | BTI-TC-MIBOperStatQlfr | .1.3.6.1.4.1.18070.2.2.1.16.8.1.7 |
| wdmAutoEnableTimer Specifies the auto-enable timer for the targeted WDM.
This value only applies if the wdmAdminStatus object
is set to autoEnabled, in which case the default value is
008-00, otherw… | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.16.8.1.8 |
| wdmActAutoEnableTimer Indicates the time remaining on the auto-enable timer if
it is actively counting down. Otherwise, the value returned
is 000-00. | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.16.8.1.9 |