wdmRowStatus

BTI-OL-MIB · .1.3.6.1.4.1.18070.2.2.1.16.8.1.100
MIB view Table view

Object

column SNMPv2-TCRowStatus 
The WDM table RowStatus object is not readable or
writeable because all entries in the table are
automatically created and deleted when the supporting
DLA or ROB circuit pack is assigned and unassigned
to an optical layer grouping. This WDM row status
object is used only in database change notifications
to indicate if the row has been created or deleted.

Context

MIB
BTI-OL-MIB
OID
.1.3.6.1.4.1.18070.2.2.1.16.8.1.100
Type
column
Access
notifyonly
Status
current
Parent
wdmEntry
Table
wdmTable
Siblings
18

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wdmCpTypeIdx
The type of circuit pack on which the WDM is located.
columnBTI-TC-MIBCpType.1.3.6.1.4.1.18070.2.2.1.16.8.1.1
wdmId
Textual data recorded by the user to briefly identify the WDM object in a manner useful to the user.
columnOctetString.1.3.6.1.4.1.18070.2.2.1.16.8.1.10
wdmCustom1
A variable length text string for operating company use.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.18070.2.2.1.16.8.1.11
wdmCustom2
A variable length text string for operating company use.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.18070.2.2.1.16.8.1.12
wdmCustom3
A variable length text string for operating company use.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.18070.2.2.1.16.8.1.13
wdmFiberType
The fiber type of the span fiber.
columnEnumeration.1.3.6.1.4.1.18070.2.2.1.16.8.1.14
wdmSpanLength
The measured length of the receive span fiber.
columnkilometers SNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.16.8.1.15
wdmSpanLossRxHighTh
The high threshold setting for the loss on the receive fiber of the Line span. The setting for this object is used to evaluate the olPortLossRxHighThCond trap. When the value of t…
columndB/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.16.8.1.16
wdmSpanLossSpecMax
The specified maximum supported loss on the Line span. The value of this object is dependent on the optical layer group configurations of the local and far-end nodes.
columndB/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.16.8.1.17
wdmNumChannels
The actual number of channels that the WDM is currently provisioned to carry.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.8.1.18
wdmShelfIdx
The number of the shelf in which the WDM is located.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.8.1.2
wdmSlotIdx
The number of the slot in which the WDM is located.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.8.1.3
wdmLineIdx
The line number of the WDM.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.8.1.4
wdmAdminStatus
The administrative status of the WDM. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
columnBTI-TC-MIBAdminStatus.1.3.6.1.4.1.18070.2.2.1.16.8.1.5
wdmOperStatus
The reported operational status of the WDM.
columnBTI-TC-MIBOperStatus.1.3.6.1.4.1.18070.2.2.1.16.8.1.6
wdmOperStatQlfr
This is a textual list of qualifiers about the reported operational status of the WDM.
columnBTI-TC-MIBOperStatQlfr.1.3.6.1.4.1.18070.2.2.1.16.8.1.7
wdmAutoEnableTimer
Specifies the auto-enable timer for the targeted WDM. This value only applies if the wdmAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherw…
columnBTI-TC-MIBHoursAndMinutes.1.3.6.1.4.1.18070.2.2.1.16.8.1.8
wdmActAutoEnableTimer
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
columnBTI-TC-MIBHoursAndMinutes.1.3.6.1.4.1.18070.2.2.1.16.8.1.9