olOSCFEGrpType
BTI-OL-MIB ·
.1.3.6.1.4.1.18070.2.2.1.16.6.1.23
Object
column
OlGroupType
The actual far-end node optical layer group configuration type.
Context
- MIB
- BTI-OL-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.16.6.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- olOSCEntry
- Table
- olOSCTable
- Siblings
- 23
Syntax
OlGroupType
- Source
- OlGroupType
- Base type
Enumeration
Values & Constraints
Type Values
1 | none |
2 | noEqlzTerm |
3 | eqlzTerm |
4 | noEqlzLine |
5 | eqlzLine |
6 | roadm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| olOSCCpTypeIdx The type of circuit pack on which the OSC is located. | column | BTI-TC-MIBCpType | .1.3.6.1.4.1.18070.2.2.1.16.6.1.1 |
| olOSCId Textual data recorded by the user to briefly identify the
OSC object in a manner useful to the user. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.16.6.1.10 |
| olOSCRowStatus The Optical Layer OSC table RowStatus object is not
readable or writeable because all entries in the table
are automatically created and deleted when the
supporting DLA or ROB equ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.18070.2.2.1.16.6.1.100 |
| olOSCCustom1 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.16.6.1.11 |
| olOSCCustom2 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.16.6.1.12 |
| olOSCCustom3 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.16.6.1.13 |
| olOSCFEIMMon This object is used to control the monitoring of the Far
End Node Mismatch Identifier condition. When enabled, the
received far-end node identification attributes will be
monitore… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.16.6.1.14 |
| olOSCExpFESysName The expected far-end node system identifier. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.16.6.1.15 |
| olOSCExpFEIPAddr The expected far-end node IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.18070.2.2.1.16.6.1.16 |
| olOSCExpFEGrp The expected far-end node optical layer group number. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.6.1.17 |
| olOSCExpFEDegr The expected far-end node optical layer degree number. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.6.1.18 |
| olOSCFESysName The actual far-end node system identifier. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.16.6.1.19 |
| olOSCShelfIdx The number of the shelf in which the OSC is located. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.6.1.2 |
| olOSCFEIPAddr The actual far-end node IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.18070.2.2.1.16.6.1.20 |
| olOSCFEGrp The actual far-end node optical layer group number. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.6.1.21 |
| olOSCFEDegr The actual far-end node optical layer degree number. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.6.1.22 |
| olOSCSlotIdx The number of the slot in which the OSC is located. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.6.1.3 |
| olOSCLineIdx The line number of the OSC. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.16.6.1.4 |
| olOSCAdminStatus The administrative status of the OSC. The default value
is autoEnabled if the supporting equipment is enabled
or autoEnabled, otherwise it is disabled. | column | BTI-TC-MIBAdminStatus | .1.3.6.1.4.1.18070.2.2.1.16.6.1.5 |
| olOSCOperStatus The reported operational status of the OSC. | column | BTI-TC-MIBOperStatus | .1.3.6.1.4.1.18070.2.2.1.16.6.1.6 |
| olOSCOperStatQlfr This is a textual list of qualifiers about the reported
operational status of the OSC. | column | BTI-TC-MIBOperStatQlfr | .1.3.6.1.4.1.18070.2.2.1.16.6.1.7 |
| olOSCAutoEnableTimer Specifies the auto-enable timer for the targeted OSC.
This value only applies if the olOSCAdminStatus object
is set to autoEnabled, in which case the default value is
008-00, othe… | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.16.6.1.8 |
| olOSCActAutoEnableTimer Indicates the time remaining on the auto-enable timer if
it is actively counting down. Otherwise, the value returned
is 000-00. | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.16.6.1.9 |