olOSCAutoEnableTimer

BTI-OL-MIB · .1.3.6.1.4.1.18070.2.2.1.16.6.1.8
MIB view Table view

Object

column r/w BTI-TC-MIBHoursAndMinutes 
Specifies the auto-enable timer for the targeted OSC.
This value only applies if the olOSCAdminStatus object
is set to autoEnabled, in which case the default value is
008-00, otherwise, it is 000-00.

Context

MIB
BTI-OL-MIB
OID
.1.3.6.1.4.1.18070.2.2.1.16.6.1.8
Type
column
Access
readwrite
Status
current
Parent
olOSCEntry
Table
olOSCTable
Siblings
23

Syntax

BTI-TC-MIBHoursAndMinutes
Source
BTI-TC-MIBHoursAndMinutes
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..7

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
olOSCCpTypeIdx
The type of circuit pack on which the OSC is located.
columnBTI-TC-MIBCpType.1.3.6.1.4.1.18070.2.2.1.16.6.1.1
olOSCId
Textual data recorded by the user to briefly identify the OSC object in a manner useful to the user.
columnOctetString.1.3.6.1.4.1.18070.2.2.1.16.6.1.10
olOSCRowStatus
The Optical Layer OSC table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB equ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.18070.2.2.1.16.6.1.100
olOSCCustom1
A variable length text string for operating company use.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.18070.2.2.1.16.6.1.11
olOSCCustom2
A variable length text string for operating company use.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.18070.2.2.1.16.6.1.12
olOSCCustom3
A variable length text string for operating company use.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.18070.2.2.1.16.6.1.13
olOSCFEIMMon
This object is used to control the monitoring of the Far End Node Mismatch Identifier condition. When enabled, the received far-end node identification attributes will be monitore…
columnEnumeration.1.3.6.1.4.1.18070.2.2.1.16.6.1.14
olOSCExpFESysName
The expected far-end node system identifier.
columnOctetString.1.3.6.1.4.1.18070.2.2.1.16.6.1.15
olOSCExpFEIPAddr
The expected far-end node IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.18070.2.2.1.16.6.1.16
olOSCExpFEGrp
The expected far-end node optical layer group number.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.6.1.17
olOSCExpFEDegr
The expected far-end node optical layer degree number.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.6.1.18
olOSCFESysName
The actual far-end node system identifier.
columnOctetString.1.3.6.1.4.1.18070.2.2.1.16.6.1.19
olOSCShelfIdx
The number of the shelf in which the OSC is located.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.6.1.2
olOSCFEIPAddr
The actual far-end node IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.18070.2.2.1.16.6.1.20
olOSCFEGrp
The actual far-end node optical layer group number.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.6.1.21
olOSCFEDegr
The actual far-end node optical layer degree number.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.6.1.22
olOSCFEGrpType
The actual far-end node optical layer group configuration type.
columnOlGroupType.1.3.6.1.4.1.18070.2.2.1.16.6.1.23
olOSCSlotIdx
The number of the slot in which the OSC is located.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.6.1.3
olOSCLineIdx
The line number of the OSC.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.16.6.1.4
olOSCAdminStatus
The administrative status of the OSC. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
columnBTI-TC-MIBAdminStatus.1.3.6.1.4.1.18070.2.2.1.16.6.1.5
olOSCOperStatus
The reported operational status of the OSC.
columnBTI-TC-MIBOperStatus.1.3.6.1.4.1.18070.2.2.1.16.6.1.6
olOSCOperStatQlfr
This is a textual list of qualifiers about the reported operational status of the OSC.
columnBTI-TC-MIBOperStatQlfr.1.3.6.1.4.1.18070.2.2.1.16.6.1.7
olOSCActAutoEnableTimer
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
columnBTI-TC-MIBHoursAndMinutes.1.3.6.1.4.1.18070.2.2.1.16.6.1.9