xcvrHistPMJABRValue
BTI-7000-MIB ·
.1.3.6.1.4.1.18070.2.2.1.6.4.1.129
Object
The total number of frames received that were longer than 14336 9600 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with non-integral number of octets (Alignment Error). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
Context
- MIB
- BTI-7000-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.6.4.1.129- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xcvrHistPMEntry
- Table
- xcvrHistPMTable
- Siblings
- 231
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcvrHistPMTypeIdx The type of the optical transceiver targeted for PMs. | column | BTI-TC-MIBXcvrType | .1.3.6.1.4.1.18070.2.2.1.6.4.1.1 |
| xcvrHistPMOPTValue The optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.10 |
| xcvrHistPMSIZE256To511Validity Indicates the validity of the provided count of packets
between 256 and 511 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.100 |
| xcvrHistPMSIZE256To511Initialize Used to initialize the value of the
xcvrHistPMSIZE256To511Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.101 |
| xcvrHistPMSIZE512To1023Value The total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.102 |
| xcvrHistPMSIZE512To1023TimeStamp The date and time stamp of the count of packets between 512
and 1023 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.103 |
| xcvrHistPMSIZE512To1023Validity Indicates the validity of the provided count of packets
between 512 and 1023 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.104 |
| xcvrHistPMSIZE512To1023Initialize Used to initialize the value of the
xcvrHistPMSIZE512To1023Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.105 |
| xcvrHistPMSIZE1024To1518Value The total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets). This object applies only to transceiver
port… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.106 |
| xcvrHistPMSIZE1024To1518TimeStamp The date and time stamp of the count of packets between 1024
and 1518 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.107 |
| xcvrHistPMSIZE1024To1518Validity Indicates the validity of the provided count of packets
between 1024 and 1518 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.108 |
| xcvrHistPMSIZE1024To1518Initialize Used to initialize the value of the
xcvrHistPMSIZE1024To1518Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.109 |
| xcvrHistPMOPTTimeStamp The date and time stamp of the optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.11 |
| xcvrHistPMSIZEOver1518Value The total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets). This object applies only to transceiv… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.110 |
| xcvrHistPMSIZEOver1518TimeStamp The date and time stamp of the count of packets over 1518
bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.111 |
| xcvrHistPMSIZEOver1518Validity Indicates the validity of the provided count of packets over
1518 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.112 |
| xcvrHistPMSIZEOver1518Initialize Used to initialize the value of the
xcvrHistPMSIZEOver1518Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.113 |
| xcvrHistPMFCSEValue The count of packets that had a valid length but had either a
Frame Check Sequence (FCS) or a bad FCS with a non-integral
number of octets (Alignment Error) . This object applies … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.114 |
| xcvrHistPMFCSETimeStamp The date and time stamp of the count of packets with bad FCS
or alignment error. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.115 |
| xcvrHistPMFCSEValidity Indicates the validity of the provided count of packets with
bad FCS or alignment error. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.116 |
| xcvrHistPMFRDRValue The total number of dropped frames due to lack of resources or
otherwise. Note that this number is not necessarily the number
of frames dropped; it is just the number of times tha… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.117 |
| xcvrHistPMFRDRTimeStamp The date and time stamp of the count of dropped packets. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.118 |
| xcvrHistPMFRDRValidity Indicates the validity of the provided count of dropped
packets. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.119 |
| xcvrHistPMOPTValidity Indicates the validity of the provided optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.12 |
| xcvrHistPMUSIZEValue The total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed. This object applies only … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.120 |
| xcvrHistPMUSIZETimeStamp The date and time stamp of the count of undersized packets. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.121 |
| xcvrHistPMUSIZEValidity Indicates the validity of the provided count of undersized
packets. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.122 |
| xcvrHistPMOSIZEValue The total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed. This object applies only t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.123 |
| xcvrHistPMOSIZETimeStamp The date and time stamp of the count of oversized packets. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.124 |
| xcvrHistPMOSIZEValidity Indicates the validity of the provided count of oversized
packets. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.125 |
| xcvrHistPMFRGTValue The total number of frames received that were less than 64
octets in length (excluding framing bits but including FCS
octets) and had either a bad Frame Check Sequence (FCS) with
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.126 |
| xcvrHistPMFRGTTimeStamp The date and time stamp of the count of received packet
fragments. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.127 |
| xcvrHistPMFRGTValidity Indicates the validity of the provided count of received
packet fragments. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.128 |
| xcvrHistPMTempValue The optical transceiver temperature. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.13 |
| xcvrHistPMJABRTimeStamp The date and time stamp of the count of received jabbers. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.130 |
| xcvrHistPMJABRValidity Indicates the validity of the provided count of received
jabbers. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.131 |
| xcvrHistPMOTUEBValue The count of OTN digital wrapper layer errored blocks. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.132 |
| xcvrHistPMOTUEBTimeStamp The date and time stamp of the OTN digital wrapper layer
errored blocks value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.133 |
| xcvrHistPMOTUEBValidity Indicates the validity of the provided OTN digital wrapper
layer errored blocks value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.134 |
| xcvrHistPMOTUBBEValue The count of OTN digital wrapper layer background block
errors. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.135 |
| xcvrHistPMOTUBBETimeStamp The date and time stamp of the OTN digital wrapper layer
background block errors. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.136 |
| xcvrHistPMOTUBBEValidity Indicates the validity of the provided OTN digital wrapper
layer background block errors value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.137 |
| xcvrHistPMOTUESValue The count of errored seconds at the OTN digital wrapper
layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.138 |
| xcvrHistPMOTUESTimeStamp The date and time stamp of the OTN digital wrapper layer
errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.139 |
| xcvrHistPMTempTimeStamp The date and time stamp of the temperature value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.14 |
| xcvrHistPMOTUESValidity Indicates the validity of the provided OTN digital wrapper
layer errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.140 |
| xcvrHistPMOTUSESValue The count of severely errored seconds at the OTN digital
wrapper layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.141 |
| xcvrHistPMOTUSESTimeStamp The date and time stamp of the OTN digital wrapper layer
severely errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.142 |
| xcvrHistPMOTUSESValidity Indicates the validity of the provided OTN digital wrapper
layer severely errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.143 |
| xcvrHistPMOTUOFSValue The count of Out-Of-Frame seconds at the OTN digital wrapper
layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.144 |
| xcvrHistPMOTUOFSTimeStamp The date and time stamp of the OTN digital wrapper layer
Out-Of-Frame seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.145 |
| xcvrHistPMOTUOFSValidity Indicates the validity of the provided OTN digital wrapper
layer Out-of-Frame seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.146 |
| xcvrHistPMSupplyVoltage2Value A second supply voltage value on the transceiver. | column | mVolts/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.147 |
| xcvrHistPMSupplyVoltage2TimeStamp The date and time stamp of the second supply voltage value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.148 |
| xcvrHistPMSupplyVoltage2Validity Indicates the validity of the provided second supply voltage
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.149 |
| xcvrHistPMTempValidity Indicates the validity of the provided temperature value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.15 |
| xcvrHistPMCVSInitialize Used to initialize the value of the xcvrHistPMCVSValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.150 |
| xcvrHistPMESSInitialize Used to initialize the value of the xcvrHistPMESSValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.151 |
| xcvrHistPMSESSInitialize Used to initialize the value of the xcvrHistPMSESSValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.152 |
| xcvrHistPMSEFSSInitialize Used to initialize the value of the xcvrHistPMSEFSSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.153 |
| xcvrHistPMRSEBInitialize Used to initialize the value of the xcvrHistPMRSEBValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.154 |
| xcvrHistPMRSBBEInitialize Used to initialize the value of the xcvrHistPMRSBBEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.155 |
| xcvrHistPMRSESInitialize Used to initialize the value of the xcvrHistPMRSESValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.156 |
| xcvrHistPMRSSESInitialize Used to initialize the value of the xcvrHistPMRSSESValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.157 |
| xcvrHistPMRSOFSInitialize Used to initialize the value of the xcvrHistPMRSOFSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.158 |
| xcvrHistPMCVInitialize Used to initialize the value of the xcvrHistPMCVValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.159 |
| xcvrHistPMSupplyVoltageValue The transceiver supply voltage. | column | mVolts/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.16 |
| xcvrHistPMESInitialize Used to initialize the value of the xcvrHistPMESValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.160 |
| xcvrHistPMSESInitialize Used to initialize the value of the xcvrHistPMSESValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.161 |
| xcvrHistPMINVBLKInitialize Used to initialize the value of the xcvrHistPMINVBLKValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.162 |
| xcvrHistPMNBITCRInitialize Used to initialize the value of the xcvrHistPMNBITCRValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.163 |
| xcvrHistPMNBYTCRInitialize Used to initialize the value of the xcvrHistPMNBYTCRValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.164 |
| xcvrHistPMUNCRCDWInitialize Used to initialize the value of the xcvrHistPMUNCRCDWValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.165 |
| xcvrHistPMFCSEInitialize Used to initialize the value of the xcvrHistPMFCSEValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.166 |
| xcvrHistPMFRDRInitialize Used to initialize the value of the xcvrHistPMFRDRValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.167 |
| xcvrHistPMUSIZEInitialize Used to initialize the value of the xcvrHistPMUSIZEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.168 |
| xcvrHistPMOSIZEInitialize Used to initialize the value of the xcvrHistPMOSIZEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.169 |
| xcvrHistPMSupplyVoltageTimeStamp The date and time stamp of the supply voltage value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.17 |
| xcvrHistPMFRGTInitialize Used to initialize the value of the xcvrHistPMFRGTValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.170 |
| xcvrHistPMJABRInitialize Used to initialize the value of the xcvrHistPMJABRValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.171 |
| xcvrHistPMOTUEBInitialize Used to initialize the value of the xcvrHistPMOTUEBValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.172 |
| xcvrHistPMOTUBBEInitialize Used to initialize the value of the xcvrHistPMOTUBBEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.173 |
| xcvrHistPMOTUESInitialize Used to initialize the value of the xcvrHistPMOTUESValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.174 |
| xcvrHistPMOTUSESInitialize Used to initialize the value of the xcvrHistPMOTUSESValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.175 |
| xcvrHistPMOTUOFSInitialize Used to initialize the value of the xcvrHistPMOTUOFSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.176 |
| xcvrHistPMUASSValue The count of unavailable seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.177 |
| xcvrHistPMUASSTimeStamp The date and time stamp of the section layer unavailable
seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.178 |
| xcvrHistPMUASSValidity Indicates the validity of the provided section layer
unavailable seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.179 |
| xcvrHistPMSupplyVoltageValidity Indicates the validity of the provided supply voltage value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.18 |
| xcvrHistPMUASSInitialize Used to initialize the value of the xcvrHistPMUASSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.180 |
| xcvrHistPMRSUASValue The count of regenerator section unavailable seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.181 |
| xcvrHistPMRSUASTimeStamp The date and time stamp of the regenerator section
unavailable seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.182 |
| xcvrHistPMRSUASValidity Indicates the validity of the provided regenerator section
unavailable seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.183 |
| xcvrHistPMRSUASInitialize Used to initialize the value of the xcvrHistPMRSUASValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.184 |
| xcvrHistPMUASValue The count of unavailable seconds. This object applies
only to transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.185 |
| xcvrHistPMUASTimeStamp The date and time stamp of the unavailable seconds
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.186 |
| xcvrHistPMUASValidity Indicates the validity of the provided unavailable
seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.187 |
| xcvrHistPMUASInitialize Used to initialize the value of the xcvrHistPMUASValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.188 |
| xcvrHistPMOTUUASValue The count of unavailable seconds at the OTN digital
wrapper layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.189 |
| xcvrHistPMLBCValue The transceiver laser bias current. | column | mAmp Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.19 |
| xcvrHistPMOTUUASTimeStamp The date and time stamp of the OTN digital wrapper layer
unavailable seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.190 |
| xcvrHistPMOTUUASValidity Indicates the validity of the provided OTN digital wrapper
layer unavailable seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.191 |
| xcvrHistPMOTUUASInitialize Used to initialize the value of the xcvrHistPMOTUUASValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.192 |
| xcvrHistPMOTNBERValue The instantaneous BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.6.4.1.193 |
| xcvrHistPMOTNBERTimeStamp The date and time stamp of the instantaneous BER. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.194 |
| xcvrHistPMOTNBERValidity Indicates the validity of the provided instantaneous BER. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.195 |
| xcvrHistPMOTNBERInitialize Used to initialize the value of the xcvrHistPMOTNBERValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.196 |
| xcvrHistPMOTNAVGBERValue The interval/average BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.6.4.1.197 |
| xcvrHistPMOTNAVGBERTimeStamp The date and time stamp of the interval/average BER. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.198 |
| xcvrHistPMOTNAVGBERValidity Indicates the validity of the provided interval/average BER. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.199 |
| xcvrHistPMShelfIdx The number of the shelf on which the optical transceiver
targeted for PMs is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.2 |
| xcvrHistPMLBCTimeStamp The date and time stamp of the laser bias current value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.20 |
| xcvrHistPMOTNAVGBERInitialize Used to initialize the value of the xcvrHistPMOTNAVGBERValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.200 |
| xcvrHistPMNBITCR64BitValue The 64-bit count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.201 |
| xcvrHistPMNBITCR64BitTimeStamp The date and time stamp of the 64-bit number of bits
corrected value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.202 |
| xcvrHistPMNBITCR64BitValidity Indicates the validity of the provided 64-bit number
of bits corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.203 |
| xcvrHistPMNBITCR64BitInitialize Used to initialize the value of the xcvrHistPMNBITCR64BitValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.204 |
| xcvrHistPMNBYTCR64BitValue The 64-bit count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.205 |
| xcvrHistPMNBYTCR64BitTimeStamp The date and time stamp of the 64-bit number of bytes
corrected value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.206 |
| xcvrHistPMNBYTCR64BitValidity Indicates the validity of the provided number of bytes
corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.207 |
| xcvrHistPMNBYTCR64BitInitialize Used to initialize the value of the xcvrHistPMNBYTCR64BitValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.208 |
| xcvrHistPMOPRMinValue The minimum optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.209 |
| xcvrHistPMLBCValidity Indicates the validity of the provided laser bias current
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.21 |
| xcvrHistPMOPRMinTimeStamp The date and time stamp of the minimum optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.210 |
| xcvrHistPMOPRMinValidity Indicates the validity of the provided minimum optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.211 |
| xcvrHistPMOPRMinInitialize Used to initialize the value of the xcvrHistPMOPRMinValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.212 |
| xcvrHistPMOPRMaxValue The maximum optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.213 |
| xcvrHistPMOPRMaxTimeStamp The date and time stamp of the maximum optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.214 |
| xcvrHistPMOPRMaxValidity Indicates the validity of the provided maximum optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.215 |
| xcvrHistPMOPRMaxInitialize Used to initialize the value of the xcvrHistPMOPRMaxValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.216 |
| xcvrHistPMOPRAvgValue The average optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.217 |
| xcvrHistPMOPRAvgTimeStamp The date and time stamp of the average optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.218 |
| xcvrHistPMOPRAvgValidity Indicates the validity of the provided average optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.219 |
| xcvrHistPMCVSValue The count of coding violations at the section layer. This
object applies only to transciever ports provisioned for a
SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.22 |
| xcvrHistPMOPRAvgInitialize Used to initialize the value of the xcvrHistPMOPRAvgValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.220 |
| xcvrHistPMOPTMinValue The minimum optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.221 |
| xcvrHistPMOPTMinTimeStamp The date and time stamp of the minimum optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.222 |
| xcvrHistPMOPTMinValidity Indicates the validity of the provided minimum optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.223 |
| xcvrHistPMOPTMinInitialize Used to initialize the value of the xcvrHistPMOPTMinValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.224 |
| xcvrHistPMOPTMaxValue The maximum optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.225 |
| xcvrHistPMOPTMaxTimeStamp The date and time stamp of the maximum optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.226 |
| xcvrHistPMOPTMaxValidity Indicates the validity of the provided maximum optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.227 |
| xcvrHistPMOPTMaxInitialize Used to initialize the value of the xcvrHistPMOPTMaxValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.228 |
| xcvrHistPMOPTAvgValue The average optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.229 |
| xcvrHistPMCVSTimeStamp The date and time stamp of the section layer coding violations
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.23 |
| xcvrHistPMOPTAvgTimeStamp The date and time stamp of the average optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.230 |
| xcvrHistPMOPTAvgValidity Indicates the validity of the provided average optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.231 |
| xcvrHistPMOPTAvgInitialize Used to initialize the value of the xcvrHistPMOPTAvgValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.232 |
| xcvrHistPMCVSValidity Indicates the validity of the provided section layer coding
violations value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.24 |
| xcvrHistPMESSValue The count of errored seconds at the section layer. This object
applies only to transciever ports provisioned for a SONET OC-N
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.25 |
| xcvrHistPMESSTimeStamp The date and time stamp of the section layer errored seconds
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.26 |
| xcvrHistPMESSValidity Indicates the validity of the provided section layer errored
seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.27 |
| xcvrHistPMSESSValue The count of severely errored seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.28 |
| xcvrHistPMSESSTimeStamp The date and time stamp of the section layer severely errored
seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.29 |
| xcvrHistPMSlotIdx The number of the slot within which the optical transceiver
targeted for PMs is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.3 |
| xcvrHistPMSESSValidity Indicates the validity of the provided section layer severely
errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.30 |
| xcvrHistPMSEFSSValue The count of severely errored framing seconds at the section
layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.31 |
| xcvrHistPMSEFSSTimeStamp The date and time stamp of the section layer severely errored
framing seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.32 |
| xcvrHistPMSEFSSValidity Indicates the validity of the provided section layer severely
errored framing seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.33 |
| xcvrHistPMRSEBValue The count of regenerator section errored blocks. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.34 |
| xcvrHistPMRSEBTimeStamp The date and time stamp of the regenerator section errored
blocks value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.35 |
| xcvrHistPMRSEBValidity Indicates the validity of the provided regenerator section
errored blocks value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.36 |
| xcvrHistPMRSBBEValue The count of regenerator section background block errors. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.37 |
| xcvrHistPMRSBBETimeStamp The date and time stamp of the regenerator section background
block errors value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.38 |
| xcvrHistPMRSBBEValidity Indicates the validity of the provided regenerator section
background block errors value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.39 |
| xcvrHistPMIdx The number of the transceiver port targeted for PMs. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.4 |
| xcvrHistPMRSESValue The count of regenerator section errored seconds. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.40 |
| xcvrHistPMRSESTimeStamp The date and time stamp of the regenerator section errored
seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.41 |
| xcvrHistPMRSESValidity Indicates the validity of the provided regenerator section
errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.42 |
| xcvrHistPMRSSESValue The count of regenerator section severely errored seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.43 |
| xcvrHistPMRSSESTimeStamp The date and time stamp of the regenerator section severely
errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.44 |
| xcvrHistPMRSSESValidity Indicates the validity of the provided regenerator section
severely errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.45 |
| xcvrHistPMRSOFSValue The count of regenerator section out-of-frame seconds. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.46 |
| xcvrHistPMRSOFSTimeStamp The date and time stamp of the regenerator section
out-of-frame seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.47 |
| xcvrHistPMRSOFSValidity Indicates the validity of the provided regenerator section
out-of-frame seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.48 |
| xcvrHistPMCVValue The count of coding violations. This object applies only to
transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.49 |
| xcvrHistPMIntervalTypeIdx The type of PM bin according to interval length. | column | BTI-TC-MIBPMIntervalType | .1.3.6.1.4.1.18070.2.2.1.6.4.1.5 |
| xcvrHistPMCVTimeStamp The date and time stamp of the coding violations value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.50 |
| xcvrHistPMCVValidity Indicates the validity of the provided coding violations
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.51 |
| xcvrHistPMESValue The count of errored seconds. This object applies only to
transciever ports provisioned for an ethernet protocol
or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.52 |
| xcvrHistPMESTimeStamp The date and time stamp of the errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.53 |
| xcvrHistPMESValidity Indicates the validity of the provided errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.54 |
| xcvrHistPMSESValue The count of severely errored seconds. This object applies
only to transciever ports provisioned for an ethernet
protocol or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.55 |
| xcvrHistPMSESTimeStamp The date and time stamp of the severely errored seconds
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.56 |
| xcvrHistPMSESValidity Indicates the validity of the provided severely errored
seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.57 |
| xcvrHistPMINVBLKValue The count of invalid blocks. This object applies only to
transciever ports provisioned for the 10 gigabit ethernet LAN
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.58 |
| xcvrHistPMINVBLKTimeStamp The date and time stamp of the invalid blocks value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.59 |
| xcvrHistPMIntervalIdx The specific PM bin number. The range is 1 to 96 for the
15-minute historical bins. For the 1-day historical bin, the
value is 1. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.6 |
| xcvrHistPMINVBLKValidity Indicates the validity of the provided invalid blocks value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.60 |
| xcvrHistPMNBITCRValue The count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.61 |
| xcvrHistPMNBITCRTimeStamp The date and time stamp of the number of bits corrected
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.62 |
| xcvrHistPMNBITCRValidity Indicates the validity of the provided number of bits
corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.63 |
| xcvrHistPMNBYTCRValue The count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.64 |
| xcvrHistPMNBYTCRTimeStamp The date and time stamp of the number of bytes corrected
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.65 |
| xcvrHistPMNBYTCRValidity Indicates the validity of the provided number of bytes
corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.66 |
| xcvrHistPMUNCRCDWValue The count of uncorrectable codewords. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.67 |
| xcvrHistPMUNCRCDWTimeStamp The date and time stamp of the uncorrectable codewords value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.68 |
| xcvrHistPMUNCRCDWValidity Indicates the validity of the provided uncorrectable codewords
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.69 |
| xcvrHistPMOPRValue The optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.7 |
| xcvrHistPMTBYCRXValue The total number of bytes of data (including those in bad
frames) received (excluding framing bits but including FCS
bytes). This object applies only to transceiver ports
provisio… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.70 |
| xcvrHistPMTBYCRXTimeStamp The date and time stamp of the received bytes count value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.71 |
| xcvrHistPMTBYCRXValidity Indicates the validity of the provided received bytes count
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.72 |
| xcvrHistPMTBYCRXInitialize Used to initialize the value of the xcvrHistPMTBYCRXValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.73 |
| xcvrHistPMTFRCRXValue The total number of received frames (incl. bad frames,
broadcast frames, and multicast frames received). This object
applies only to transceiver ports provisioned for the 10
gigab… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.74 |
| xcvrHistPMTFRCRXTimeStamp The date and time stamp of the received frames count value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.75 |
| xcvrHistPMTFRCRXValidity Indicates the validity of the provided received frames count
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.76 |
| xcvrHistPMTFRCRXInitialize Used to initialize the value of the xcvrHistPMTFRCRXValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.77 |
| xcvrHistPMBCSTValue The total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames. This object applies only to transceiver
por… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.78 |
| xcvrHistPMBCSTTimeStamp The date and time stamp of the broadcast packets received
count value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.79 |
| xcvrHistPMOPRTimeStamp The date and time stamp of the optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.8 |
| xcvrHistPMBCSTValidity Indicates the validity of the provided broadcast packets
received count value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.80 |
| xcvrHistPMBCSTInitialize Used to initialize the value of the xcvrHistPMBCSTValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.81 |
| xcvrHistPMMCSTValue The total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address. This object ap… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.82 |
| xcvrHistPMMCSTTimeStamp The date and time stamp of the multicast packets received
count value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.83 |
| xcvrHistPMMCSTValidity Indicates the validity of the provided multicast packets
received count value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.84 |
| xcvrHistPMMCSTInitialize Used to initialize the value of the xcvrHistPMMCSTValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.85 |
| xcvrHistPMSIZE64Value The total number of 64 byte frames received (excluding framing
bits but including FCS octets). This object applies only to
transceiver ports provisioned for the 10 gigabit etherne… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.86 |
| xcvrHistPMSIZE64TimeStamp The date and time stamp of the count of 64-byte packets
received. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.87 |
| xcvrHistPMSIZE64Validity Indicates the validity of the provided count of 64-byte
packets packets received. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.88 |
| xcvrHistPMSIZE64Initialize Used to initialize the value of the xcvrHistPMSIZE64Value
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.89 |
| xcvrHistPMOPRValidity Indicates the validity of the provided optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.9 |
| xcvrHistPMSIZE65To127Value The total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
p… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.90 |
| xcvrHistPMSIZE65To127TimeStamp The date and time stamp of the count of packets between 65 and
127 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.91 |
| xcvrHistPMSIZE65To127Validity Indicates the validity of the provided count of packets
between 65 and 127 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.92 |
| xcvrHistPMSIZE65To127Initialize Used to initialize the value of the xcvrHistPMSIZE65To127Value
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.93 |
| xcvrHistPMSIZE128To255Value The total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.94 |
| xcvrHistPMSIZE128To255TimeStamp The date and time stamp of the count of packets between 128
and 255 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.95 |
| xcvrHistPMSIZE128To255Validity Indicates the validity of the provided count of packets
between 128 and 255 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.4.1.96 |
| xcvrHistPMSIZE128To255Initialize Used to initialize the value of the
xcvrHistPMSIZE128To255Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.4.1.97 |
| xcvrHistPMSIZE256To511Value The total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.4.1.98 |
| xcvrHistPMSIZE256To511TimeStamp The date and time stamp of the count of packets between 256
and 511 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.4.1.99 |