xcvrCrntPMFRGTValue
BTI-7000-MIB ·
.1.3.6.1.4.1.18070.2.2.1.6.3.1.125
Object
The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). This object applies only to transceiver ports provisioned for the 10 gigabit ethernet LAN protocol.
Context
- MIB
- BTI-7000-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.6.3.1.125- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xcvrCrntPMEntry
- Table
- xcvrCrntPMTable
- Siblings
- 230
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcvrCrntPMTypeIdx The type of the optical transceiver targeted for PMs. | column | BTI-TC-MIBXcvrType | .1.3.6.1.4.1.18070.2.2.1.6.3.1.1 |
| xcvrCrntPMOPTTimeStamp The date and time stamp of the optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.10 |
| xcvrCrntPMSIZE256To511Initialize Used to initialize the value of the
xcvrCrntPMSIZE256To511Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.100 |
| xcvrCrntPMSIZE512To1023Value The total number of frames received that are 512 to 1023 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.101 |
| xcvrCrntPMSIZE512To1023TimeStamp The date and time stamp of the count of packets between 512
and 1023 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.102 |
| xcvrCrntPMSIZE512To1023Validity Indicates the validity of the provided count of packets
between 512 and 1023 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.103 |
| xcvrCrntPMSIZE512To1023Initialize Used to initialize the value of the
xcvrCrntPMSIZE512To1023Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.104 |
| xcvrCrntPMSIZE1024To1518Value The total number of frames received that are 1024 to 1518
bytes inclusive in length (excluding framing bits but
including FCS octets). This object applies only to transceiver
port… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.105 |
| xcvrCrntPMSIZE1024To1518TimeStamp The date and time stamp of the count of packets between 1024
and 1518 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.106 |
| xcvrCrntPMSIZE1024To1518Validity Indicates the validity of the provided count of packets
between 1024 and 1518 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.107 |
| xcvrCrntPMSIZE1024To1518Initialize Used to initialize the value of the
xcvrCrntPMSIZE1024To1518Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.108 |
| xcvrCrntPMSIZEOver1518Value The total number of frames received that are greater than or
equal to 1519 bytes in length (excluding framing bits but
including FCS octets). This object applies only to transceiv… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.109 |
| xcvrCrntPMOPTValidity Indicates the validity of the provided optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.11 |
| xcvrCrntPMSIZEOver1518TimeStamp The date and time stamp of the count of packets over 1518
bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.110 |
| xcvrCrntPMSIZEOver1518Validity Indicates the validity of the provided count of packets over
1518 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.111 |
| xcvrCrntPMSIZEOver1518Initialize Used to initialize the value of the
xcvrCrntPMSIZEOver1518Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.112 |
| xcvrCrntPMFCSEValue The count of packets that had a valid length but had either a
Frame Check Sequence (FCS) or a bad FCS with a non-integral
number of octets (Alignment Error) . This object applies … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.113 |
| xcvrCrntPMFCSETimeStamp The date and time stamp of the count of packets with bad FCS
or alignment error. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.114 |
| xcvrCrntPMFCSEValidity Indicates the validity of the provided count of packets with
bad FCS or alignment error. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.115 |
| xcvrCrntPMFRDRValue The total number of dropped frames due to lack of resources or
otherwise. Note that this number is not necessarily the number
of frames dropped; it is just the number of times tha… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.116 |
| xcvrCrntPMFRDRTimeStamp The date and time stamp of the count of dropped packets. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.117 |
| xcvrCrntPMFRDRValidity Indicates the validity of the provided count of dropped
packets. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.118 |
| xcvrCrntPMUSIZEValue The total number of frames received that were less than 64
octets long (excluding framing bits, but including FCS octets)
and were otherwise well formed. This object applies only … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.119 |
| xcvrCrntPMTempValue The optical transceiver temperature. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.12 |
| xcvrCrntPMUSIZETimeStamp The date and time stamp of the count of undersized packets. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.120 |
| xcvrCrntPMUSIZEValidity Indicates the validity of the provided count of undersized
packets. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.121 |
| xcvrCrntPMOSIZEValue The total number of frames received that were longer than 9600
octets (excluding framing bits, but including FCS octets) and
were otherwise well formed. This object applies only t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.122 |
| xcvrCrntPMOSIZETimeStamp The date and time stamp of the count of oversized packets. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.123 |
| xcvrCrntPMOSIZEValidity Indicates the validity of the provided count of oversized
packets. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.124 |
| xcvrCrntPMFRGTTimeStamp The date and time stamp of the count of received packet
fragments. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.126 |
| xcvrCrntPMFRGTValidity Indicates the validity of the provided count of received
packet fragments. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.127 |
| xcvrCrntPMJABRValue The total number of frames received that were longer than
14336 9600 octets (excluding framing bits, but including FCS
octets), and had either a bad Frame Check Sequence (FCS) wit… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.128 |
| xcvrCrntPMJABRTimeStamp The date and time stamp of the count of received jabbers. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.129 |
| xcvrCrntPMTempTimeStamp The date and time stamp of the temperature value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.13 |
| xcvrCrntPMJABRValidity Indicates the validity of the provided count of received
jabbers. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.130 |
| xcvrCrntPMOTUEBValue The count of OTN digital wrapper layer errored blocks. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.131 |
| xcvrCrntPMOTUEBTimeStamp The date and time stamp of the OTN digital wrapper layer
errored blocks value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.132 |
| xcvrCrntPMOTUEBValidity Indicates the validity of the provided OTN digital wrapper
layer errored blocks value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.133 |
| xcvrCrntPMOTUBBEValue The count of OTN digital wrapper layer background block
errors. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.134 |
| xcvrCrntPMOTUBBETimeStamp The date and time stamp of the OTN digital wrapper layer
background block errors. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.135 |
| xcvrCrntPMOTUBBEValidity Indicates the validity of the provided OTN digital wrapper
layer background block errors value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.136 |
| xcvrCrntPMOTUESValue The count of errored seconds at the OTN digital wrapper
layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.137 |
| xcvrCrntPMOTUESTimeStamp The date and time stamp of the OTN digital wrapper layer
errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.138 |
| xcvrCrntPMOTUESValidity Indicates the validity of the provided OTN digital wrapper
layer errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.139 |
| xcvrCrntPMTempValidity Indicates the validity of the provided temperature value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.14 |
| xcvrCrntPMOTUSESValue The count of severely errored seconds at the OTN digital
wrapper layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.140 |
| xcvrCrntPMOTUSESTimeStamp The date and time stamp of the OTN digital wrapper layer
severely errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.141 |
| xcvrCrntPMOTUSESValidity Indicates the validity of the provided OTN digital wrapper
layer severely errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.142 |
| xcvrCrntPMOTUOFSValue The count of Out-Of-Frame seconds at the OTN digital wrapper
layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.143 |
| xcvrCrntPMOTUOFSTimeStamp The date and time stamp of the OTN digital wrapper layer
Out-Of-Frame seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.144 |
| xcvrCrntPMOTUOFSValidity Indicates the validity of the provided OTN digital wrapper
layer Out-of-Frame seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.145 |
| xcvrCrntPMSupplyVoltage2Value A second supply voltage value on the transceiver. | column | mVolts/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.146 |
| xcvrCrntPMSupplyVoltage2TimeStamp The date and time stamp of the second supply voltage value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.147 |
| xcvrCrntPMSupplyVoltage2Validity Indicates the validity of the provided second supply voltage
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.148 |
| xcvrCrntPMCVSInitialize Used to initialize the value of the xcvrCrntPMCVSValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.149 |
| xcvrCrntPMSupplyVoltageValue The transceiver supply voltage. | column | mVolts/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.15 |
| xcvrCrntPMESSInitialize Used to initialize the value of the xcvrCrntPMESSValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.150 |
| xcvrCrntPMSESSInitialize Used to initialize the value of the xcvrCrntPMSESSValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.151 |
| xcvrCrntPMSEFSSInitialize Used to initialize the value of the xcvrCrntPMSEFSSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.152 |
| xcvrCrntPMRSEBInitialize Used to initialize the value of the xcvrCrntPMRSEBValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.153 |
| xcvrCrntPMRSBBEInitialize Used to initialize the value of the xcvrCrntPMRSBBEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.154 |
| xcvrCrntPMRSESInitialize Used to initialize the value of the xcvrCrntPMRSESValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.155 |
| xcvrCrntPMRSSESInitialize Used to initialize the value of the xcvrCrntPMRSSESValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.156 |
| xcvrCrntPMRSOFSInitialize Used to initialize the value of the xcvrCrntPMRSOFSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.157 |
| xcvrCrntPMCVInitialize Used to initialize the value of the xcvrCrntPMCVValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.158 |
| xcvrCrntPMESInitialize Used to initialize the value of the xcvrCrntPMESValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.159 |
| xcvrCrntPMSupplyVoltageTimeStamp The date and time stamp of the supply voltage value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.16 |
| xcvrCrntPMSESInitialize Used to initialize the value of the xcvrCrntPMSESValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.160 |
| xcvrCrntPMINVBLKInitialize Used to initialize the value of the xcvrCrntPMINVBLKValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.161 |
| xcvrCrntPMNBITCRInitialize Used to initialize the value of the xcvrCrntPMNBITCRValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.162 |
| xcvrCrntPMNBYTCRInitialize Used to initialize the value of the xcvrCrntPMNBYTCRValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.163 |
| xcvrCrntPMUNCRCDWInitialize Used to initialize the value of the xcvrCrntPMUNCRCDWValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.164 |
| xcvrCrntPMFCSEInitialize Used to initialize the value of the xcvrCrntPMFCSEValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.165 |
| xcvrCrntPMFRDRInitialize Used to initialize the value of the xcvrCrntPMFRDRValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.166 |
| xcvrCrntPMUSIZEInitialize Used to initialize the value of the xcvrCrntPMUSIZEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.167 |
| xcvrCrntPMOSIZEInitialize Used to initialize the value of the xcvrCrntPMOSIZEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.168 |
| xcvrCrntPMFRGTInitialize Used to initialize the value of the xcvrCrntPMFRGTValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.169 |
| xcvrCrntPMSupplyVoltageValidity Indicates the validity of the provided supply voltage value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.17 |
| xcvrCrntPMJABRInitialize Used to initialize the value of the xcvrCrntPMJABRValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.170 |
| xcvrCrntPMOTUEBInitialize Used to initialize the value of the xcvrCrntPMOTUEBValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.171 |
| xcvrCrntPMOTUBBEInitialize Used to initialize the value of the xcvrCrntPMOTUBBEValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.172 |
| xcvrCrntPMOTUESInitialize Used to initialize the value of the xcvrCrntPMOTUESValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.173 |
| xcvrCrntPMOTUSESInitialize Used to initialize the value of the xcvrCrntPMOTUSESValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.174 |
| xcvrCrntPMOTUOFSInitialize Used to initialize the value of the xcvrCrntPMOTUOFSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.175 |
| xcvrCrntPMUASSValue The count of unavailable seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.176 |
| xcvrCrntPMUASSTimeStamp The date and time stamp of the section layer unavailable
seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.177 |
| xcvrCrntPMUASSValidity Indicates the validity of the provided section layer
unavailable seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.178 |
| xcvrCrntPMUASSInitialize Used to initialize the value of the xcvrCrntPMUASSValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.179 |
| xcvrCrntPMLBCValue The transceiver laser bias current. | column | mAmp Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.18 |
| xcvrCrntPMRSUASValue The count of regenerator section unavailable seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.180 |
| xcvrCrntPMRSUASTimeStamp The date and time stamp of the regenerator section
unavailable seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.181 |
| xcvrCrntPMRSUASValidity Indicates the validity of the provided regenerator section
unavailable seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.182 |
| xcvrCrntPMRSUASInitialize Used to initialize the value of the xcvrCrntPMRSUASValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.183 |
| xcvrCrntPMUASValue The count of unavailable seconds. This object applies
only to transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.184 |
| xcvrCrntPMUASTimeStamp The date and time stamp of the unavailable seconds
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.185 |
| xcvrCrntPMUASValidity Indicates the validity of the provided unavailable
seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.186 |
| xcvrCrntPMUASInitialize Used to initialize the value of the xcvrCrntPMUASValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.187 |
| xcvrCrntPMOTUUASValue The count of unavailable seconds at the OTN digital
wrapper layer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.188 |
| xcvrCrntPMOTUUASTimeStamp The date and time stamp of the OTN digital wrapper layer
unavailable seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.189 |
| xcvrCrntPMLBCTimeStamp The date and time stamp of the laser bias current value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.19 |
| xcvrCrntPMOTUUASValidity Indicates the validity of the provided OTN digital wrapper
layer unavailable seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.190 |
| xcvrCrntPMOTUUASInitialize Used to initialize the value of the xcvrCrntPMOTUUASValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.191 |
| xcvrCrntPMOTNBERValue The instantaneous BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.6.3.1.192 |
| xcvrCrntPMOTNBERTimeStamp The date and time stamp of the instantaneous BER. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.193 |
| xcvrCrntPMOTNBERValidity Indicates the validity of the provided instantaneous BER. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.194 |
| xcvrCrntPMOTNBERInitialize Used to initialize the value of the xcvrCrntPMOTNBERValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.195 |
| xcvrCrntPMOTNAVGBERValue The average/interval BER of transciever ports provisioned for the 10 gigabit
ethernet LAN with FEC protocol. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.6.3.1.196 |
| xcvrCrntPMOTNAVGBERTimeStamp The date and time stamp of the average/interval BER. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.197 |
| xcvrCrntPMOTNAVGBERValidity Indicates the validity of the provided average/interval BER. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.198 |
| xcvrCrntPMOTNAVGBERInitialize Used to initialize the value of the xcvrCrntPMOTNAVGBERValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.199 |
| xcvrCrntPMShelfIdx The shelf number on which the optical transceiver targeted for
PMs is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.2 |
| xcvrCrntPMLBCValidity Indicates the validity of the provided laser bias current
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.20 |
| xcvrCrntPMNBITCR64BitValue The 64-bit count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.200 |
| xcvrCrntPMNBITCR64BitTimeStamp The date and time stamp of the 64-bit number of bits
corrected value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.201 |
| xcvrCrntPMNBITCR64BitValidity Indicates the validity of the provided 64-bit number
of bits corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.202 |
| xcvrCrntPMNBITCR64BitInitialize Used to initialize the value of the xcvrCrntPMNBITCR64BitValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.203 |
| xcvrCrntPMNBYTCR64BitValue The 64-bit count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.204 |
| xcvrCrntPMNBYTCR64BitTimeStamp The date and time stamp of the 64-bit number of bytes
corrected value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.205 |
| xcvrCrntPMNBYTCR64BitValidity Indicates the validity of the provided 64-bit number of
bytes corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.206 |
| xcvrCrntPMNBYTCR64BitInitialize Used to initialize the value of the xcvrCrntPMNBYTCR64BitValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.207 |
| xcvrCrntPMOPRMinValue The minimum optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.208 |
| xcvrCrntPMOPRMinTimeStamp The date and time stamp of the minimum optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.209 |
| xcvrCrntPMCVSValue The count of coding violations at the section layer. This
object applies only to transciever ports provisioned for a
SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.21 |
| xcvrCrntPMOPRMinValidity Indicates the validity of the provided minimum optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.210 |
| xcvrCrntPMOPRMinInitialize Used to initialize the value of the xcvrCrntPMOPRMinValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.211 |
| xcvrCrntPMOPRMaxValue The maximum optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.212 |
| xcvrCrntPMOPRMaxTimeStamp The date and time stamp of the maximum optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.213 |
| xcvrCrntPMOPRMaxValidity Indicates the validity of the provided maximum optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.214 |
| xcvrCrntPMOPRMaxInitialize Used to initialize the value of the xcvrCrntPMOPRMaxValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.215 |
| xcvrCrntPMOPRAvgValue The average optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.216 |
| xcvrCrntPMOPRAvgTimeStamp The date and time stamp of the average optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.217 |
| xcvrCrntPMOPRAvgValidity Indicates the validity of the provided average optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.218 |
| xcvrCrntPMOPRAvgInitialize Used to initialize the value of the xcvrCrntPMOPRAvgValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.219 |
| xcvrCrntPMCVSTimeStamp The date and time stamp of the section layer coding violations
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.22 |
| xcvrCrntPMOPTMinValue The minimum optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.220 |
| xcvrCrntPMOPTMinTimeStamp The date and time stamp of the minimum optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.221 |
| xcvrCrntPMOPTMinValidity Indicates the validity of the provided minimum optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.222 |
| xcvrCrntPMOPTMinInitialize Used to initialize the value of the xcvrCrntPMOPTMinValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.223 |
| xcvrCrntPMOPTMaxValue The maximum optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.224 |
| xcvrCrntPMOPTMaxTimeStamp The date and time stamp of the maximum optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.225 |
| xcvrCrntPMOPTMaxValidity Indicates the validity of the provided maximum optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.226 |
| xcvrCrntPMOPTMaxInitialize Used to initialize the value of the xcvrCrntPMOPTMaxValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.227 |
| xcvrCrntPMOPTAvgValue The average optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.228 |
| xcvrCrntPMOPTAvgTimeStamp The date and time stamp of the average optical power transmitted
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.229 |
| xcvrCrntPMCVSValidity Indicates the validity of the provided section layer coding
violations value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.23 |
| xcvrCrntPMOPTAvgValidity Indicates the validity of the provided average optical power
transmitted value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.230 |
| xcvrCrntPMOPTAvgInitialize Used to initialize the value of the xcvrCrntPMOPTAvgValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.231 |
| xcvrCrntPMESSValue The count of errored seconds at the section layer. This object
applies only to transciever ports provisioned for a SONET OC-N
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.24 |
| xcvrCrntPMESSTimeStamp The date and time stamp of the section layer errored seconds
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.25 |
| xcvrCrntPMESSValidity Indicates the validity of the provided section layer errored
seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.26 |
| xcvrCrntPMSESSValue The count of severely errored seconds at the section layer.
This object applies only to transciever ports provisioned for
a SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.27 |
| xcvrCrntPMSESSTimeStamp The date and time stamp of the section layer severely errored
seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.28 |
| xcvrCrntPMSESSValidity Indicates the validity of the provided section layer severely
errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.29 |
| xcvrCrntPMSlotIdx The slot number on which the optical transceiver targeted for
PMs is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.3 |
| xcvrCrntPMSEFSSValue The count of severely errored framing seconds at the section
layer. This object applies only to transciever ports
provisioned for a SONET OC-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.30 |
| xcvrCrntPMSEFSSTimeStamp The date and time stamp of the section layer severely errored
framing seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.31 |
| xcvrCrntPMSEFSSValidity Indicates the validity of the provided section layer severely
errored framing seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.32 |
| xcvrCrntPMRSEBValue The count of regenerator section errored blocks. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.33 |
| xcvrCrntPMRSEBTimeStamp The date and time stamp of the regenerator section errored
blocks value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.34 |
| xcvrCrntPMRSEBValidity Indicates the validity of the provided regenerator section
errored blocks value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.35 |
| xcvrCrntPMRSBBEValue The count of regenerator section background block errors. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.36 |
| xcvrCrntPMRSBBETimeStamp The date and time stamp of the regenerator section background
block errors value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.37 |
| xcvrCrntPMRSBBEValidity Indicates the validity of the provided regenerator section
background block errors value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.38 |
| xcvrCrntPMRSESValue The count of regenerator section errored seconds. This object
applies only to transciever ports provisioned for a SDH STM-N
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.39 |
| xcvrCrntPMIdx The optical transceiver port number on the circuit pack that
is targeted for PMs. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.4 |
| xcvrCrntPMRSESTimeStamp The date and time stamp of the regenerator section errored
seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.40 |
| xcvrCrntPMRSESValidity Indicates the validity of the provided regenerator section
errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.41 |
| xcvrCrntPMRSSESValue The count of regenerator section severely errored seconds.
This object applies only to transciever ports provisioned for
a SDH STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.42 |
| xcvrCrntPMRSSESTimeStamp The date and time stamp of the regenerator section severely
errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.43 |
| xcvrCrntPMRSSESValidity Indicates the validity of the provided regenerator section
severely errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.44 |
| xcvrCrntPMRSOFSValue The count of regenerator section out-of-frame seconds. This
object applies only to transciever ports provisioned for a SDH
STM-N protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.45 |
| xcvrCrntPMRSOFSTimeStamp The date and time stamp of the regenerator section
out-of-frame seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.46 |
| xcvrCrntPMRSOFSValidity Indicates the validity of the provided regenerator section
out-of-frame seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.47 |
| xcvrCrntPMCVValue The count of coding violations. This object applies only to
transciever ports provisioned for the gigabit ethernet
protocol or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.48 |
| xcvrCrntPMCVTimeStamp The date and time stamp of the coding violations value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.49 |
| xcvrCrntPMIntervalTypeIdx The type of PM bin according to interval length. | column | BTI-TC-MIBPMIntervalType | .1.3.6.1.4.1.18070.2.2.1.6.3.1.5 |
| xcvrCrntPMCVValidity Indicates the validity of the provided coding violations
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.50 |
| xcvrCrntPMESValue The count of errored seconds. This object applies only to
transciever ports provisioned for an ethernet protocol
or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.51 |
| xcvrCrntPMESTimeStamp The date and time stamp of the errored seconds value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.52 |
| xcvrCrntPMESValidity Indicates the validity of the provided errored seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.53 |
| xcvrCrntPMSESValue The count of severely errored seconds. This object applies
only to transciever ports provisioned for an ethernet
protocol or a fiber channel protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.54 |
| xcvrCrntPMSESTimeStamp The date and time stamp of the severely errored seconds
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.55 |
| xcvrCrntPMSESValidity Indicates the validity of the provided severely errored
seconds value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.56 |
| xcvrCrntPMINVBLKValue The count of invalid blocks. This object applies only to
transciever ports provisioned for the 10 gigabit ethernet LAN
protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.57 |
| xcvrCrntPMINVBLKTimeStamp The date and time stamp of the invalid blocks value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.58 |
| xcvrCrntPMINVBLKValidity Indicates the validity of the provided invalid blocks value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.59 |
| xcvrCrntPMOPRValue The optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.6 |
| xcvrCrntPMNBITCRValue The count of the number of bits corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.60 |
| xcvrCrntPMNBITCRTimeStamp The date and time stamp of the number of bits corrected
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.61 |
| xcvrCrntPMNBITCRValidity Indicates the validity of the provided number of bits
corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.62 |
| xcvrCrntPMNBYTCRValue The count of the number of bytes corrected. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.63 |
| xcvrCrntPMNBYTCRTimeStamp The date and time stamp of the number of bytes corrected
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.64 |
| xcvrCrntPMNBYTCRValidity Indicates the validity of the provided number of bytes
corrected value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.65 |
| xcvrCrntPMUNCRCDWValue The count of uncorrectable codewords. This object
applies only to transciever ports provisioned for a protocol
that includes Forward Error Correction (FEC). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.66 |
| xcvrCrntPMUNCRCDWTimeStamp The date and time stamp of the uncorrectable codewords value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.67 |
| xcvrCrntPMUNCRCDWValidity Indicates the validity of the provided uncorrectable codewords
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.68 |
| xcvrCrntPMTBYCRXValue The total number of bytes of data (including those in bad
frames) received (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
provisi… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.69 |
| xcvrCrntPMOPRTimeStamp The date and time stamp of the optical power received value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.7 |
| xcvrCrntPMTBYCRXTimeStamp The date and time stamp of the received bytes count value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.70 |
| xcvrCrntPMTBYCRXValidity Indicates the validity of the provided received bytes count
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.71 |
| xcvrCrntPMTBYCRXInitialize Used to initialize the value of the xcvrCrntPMTBYCRXValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.72 |
| xcvrCrntPMTFRCRXValue The total number of received frames (incl. bad frames,
broadcast frames, and multicast frames received). This object
applies only to transceiver ports provisioned for the 10
gigab… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.73 |
| xcvrCrntPMTFRCRXTimeStamp The date and time stamp of the total received frames count
value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.74 |
| xcvrCrntPMTFRCRXValidity Indicates the validity of the provided received frames count
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.75 |
| xcvrCrntPMTFRCRXInitialize Used to initialize the value of the xcvrCrntPMTFRCRXValue
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.76 |
| xcvrCrntPMBCSTValue The total number of good frames received that were directed to
the broadcast address. Note that this does not include
multicast frames. This object applies only to transceiver
por… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.77 |
| xcvrCrntPMBCSTTimeStamp The date and time stamp of the broadcast packets received
count value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.78 |
| xcvrCrntPMBCSTValidity Indicates the validity of the provided broadcast packets
received count value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.79 |
| xcvrCrntPMOPRValidity Indicates the validity of the provided optical power received
value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.8 |
| xcvrCrntPMBCSTInitialize Used to initialize the value of the xcvrCrntPMBCSTValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.80 |
| xcvrCrntPMMCSTValue The total number of good frames received that were directed to
a multicast address. Note that this number does not include
frames directed to the broadcast address. This object ap… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.81 |
| xcvrCrntPMMCSTTimeStamp The date and time stamp of the multicast packets received
count value. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.82 |
| xcvrCrntPMMCSTValidity Indicates the validity of the provided multicast packets
received count value. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.83 |
| xcvrCrntPMMCSTInitialize Used to initialize the value of the xcvrCrntPMMCSTValue object
to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.84 |
| xcvrCrntPMSIZE64Value The total number of 64 byte frames received (excluding framing
bits but including FCS octets). This object applies only to
transceiver ports provisioned for the 10 gigabit etherne… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.85 |
| xcvrCrntPMSIZE64TimeStamp The date and time stamp of the count of 64-byte packets
received. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.86 |
| xcvrCrntPMSIZE64Validity Indicates the validity of the provided count of 64-byte
packets packets received. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.87 |
| xcvrCrntPMSIZE64Initialize Used to initialize the value of the xcvrCrntPMSIZE64Value
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.88 |
| xcvrCrntPMSIZE65To127Value The total number of frames received that are 65 to 127 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
p… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.89 |
| xcvrCrntPMOPTValue The optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.9 |
| xcvrCrntPMSIZE65To127TimeStamp The date and time stamp of the count of packets between 65 and
127 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.90 |
| xcvrCrntPMSIZE65To127Validity Indicates the validity of the provided count of packets
between 65 and 127 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.91 |
| xcvrCrntPMSIZE65To127Initialize Used to initialize the value of the xcvrCrntPMSIZE65To127Value
object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.92 |
| xcvrCrntPMSIZE128To255Value The total number of frames received that are 128 to 255 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.93 |
| xcvrCrntPMSIZE128To255TimeStamp The date and time stamp of the count of packets between 128
and 255 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.94 |
| xcvrCrntPMSIZE128To255Validity Indicates the validity of the provided count of packets
between 128 and 255 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.95 |
| xcvrCrntPMSIZE128To255Initialize Used to initialize the value of the
xcvrCrntPMSIZE128To255Value object to 0. | column | BTI-TC-MIBInitializeCmd | .1.3.6.1.4.1.18070.2.2.1.6.3.1.96 |
| xcvrCrntPMSIZE256To511Value The total number of frames received that are 256 to 511 bytes
inclusive in length (excluding framing bits but including FCS
octets). This object applies only to transceiver ports
… | column | BTI-TC-MIBUnsigned64 | .1.3.6.1.4.1.18070.2.2.1.6.3.1.97 |
| xcvrCrntPMSIZE256To511TimeStamp The date and time stamp of the count of packets between 256
and 511 bytes. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.1.6.3.1.98 |
| xcvrCrntPMSIZE256To511Validity Indicates the validity of the provided count of packets
between 256 and 511 bytes. | column | BTI-TC-MIBPMValidity | .1.3.6.1.4.1.18070.2.2.1.6.3.1.99 |