stmnOperStatus
BTI-7000-MIB ·
.1.3.6.1.4.1.18070.2.2.1.4.7.1.15
Object
column
BTI-TC-MIBOperStatus
The reported operational status of the STM-N facility.
Context
- MIB
- BTI-7000-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.4.7.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- stmnEntry
- Table
- stmnTable
- Siblings
- 33
Syntax
BTI-TC-MIBOperStatus
- Source
- BTI-TC-MIBOperStatus
- Base type
Enumeration
Values & Constraints
Object Constraints
range: 1-64
Type Values
1 | up |
2 | down |
3 | testing |
4 | unknown |
5 | dormant |
6 | notPresent |
7 | lowerLayerDown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| stmnTypeIdx The specific type of STM-N signal which is provisioned. | column | BTI-TC-MIBStmnType | .1.3.6.1.4.1.18070.2.2.1.4.7.1.1 |
| stmnOpticalPwrTransmitted The optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.10 |
| stmnRowStatus Used to control the addition and deletion of entries in the
STM-N table, which in turn controls provisioning and
deprovisioning of STM-N facilities. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.18070.2.2.1.4.7.1.100 |
| stmnBER The Bit Error Rate measured on the received signal. | column | BTI-TC-MIBBERType | .1.3.6.1.4.1.18070.2.2.1.4.7.1.11 |
| stmnBERTh The Bit Error Rate threshold above which the Signal Degrade
condition is raised. | column | BTI-TC-MIBBERType | .1.3.6.1.4.1.18070.2.2.1.4.7.1.12 |
| stmnPEC An optionally provisioned Product Equipment Code used to
validate the physically present optical transceiver on the
STM-N port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.7.1.13 |
| stmnAdminStatus The administrative status of the STM-N facility. | column | BTI-TC-MIBAdminStatus | .1.3.6.1.4.1.18070.2.2.1.4.7.1.14 |
| stmnOperStatQlfr This is a textual list of qualifiers about the reported
operational status of the STM-N facility. | column | BTI-TC-MIBOperStatQlfr | .1.3.6.1.4.1.18070.2.2.1.4.7.1.16 |
| stmnAutoEnableTimer Specifies the auto-enable timer for the targeted STM-N
facility. This value only applies if the stmnAdminStatus
object is set to autoEnabled. Otherwise, the value returned is
000-… | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.4.7.1.17 |
| stmnActAutoEnableTimer Indicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00. | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.4.7.1.18 |
| stmnWavelength The wavelength to be transmitted by the transceiver on the
STM-N facility port. This is a mandatory object when a row of
the STM-N table is created. | column | BTI-TC-MIBFixedX100 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.19 |
| stmnShelfIdx The number of the shelf on which the STM-N facility is
provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.2 |
| stmnVendorPN1 An optionally provisioned part number used to validate the
optical transceiver on the STM-N facility port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.7.1.20 |
| stmnVendorPN2 An optionally provisioned part number used to validate the
optical transceiver on the STM-N facility port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.7.1.21 |
| stmnVendorPN3 An optionally provisioned part number used to validate the
optical transceiver on the STM-N facility port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.7.1.22 |
| stmnPhyPMMon Indicates if the STM-N facility is configured to report
threshold crossing conditions for physical layer performance
monitoring parameters. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.7.1.23 |
| stmnLaserStatus An indication of the operational status of the transceiver
laser on the STM-N facility port. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.7.1.24 |
| stmnId1 Textual data recorded by the user to describe the provisioned
STM-N facility in a manner useful to the user. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.7.1.25 |
| stmnFiberType An optional specification of the fiber type that interfaces to
the STM-N facility port. | column | BTI-TC-MIBFiberType | .1.3.6.1.4.1.18070.2.2.1.4.7.1.26 |
| stmnCustom1 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.7.1.27 |
| stmnTOHTransparency Used to configure whether the transport overhead of the the
SDH STM-N facility is to be handled transparently or if it is
to be terminated and regenerated. This object only applie… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.7.1.28 |
| stmnLineMapping Used to configure the OTN configuration of the line port. If
set to unmapped, there is no OTN digital wrapper added to the
STM-64 or STM-16 facility.
The odu1ToOtu… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.7.1.29 |
| stmnSlotIdx The number of the slot within which the STM-N facility is
provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.3 |
| stmnProtSwEvtType Indicates the type of protection switching event that has
occured on an STM-N facility. | column | BTI-TC-MIBProtSwEvtType | .1.3.6.1.4.1.18070.2.2.1.4.7.1.30 |
| stmnDCCTransparency Used to configure whether the Data Communications Channel (DCC)
is transported transparently through the circuit pack. Specifically,
this refers to the D1, D2 and D3 section DCC b… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.7.1.31 |
| stmnTransparencyChannel Used to configure the VC4 channel number on which the DCC
is transported. This object only applies to STM-16 client facilities
on the 10G MXP circuit pack and the STM-4 client fa… | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.32 |
| stmnRemoteId Identifies the remote node and port to which the
STM-n port is connected, in the format prescribed
by the PSM network management system. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.7.1.33 |
| stmnPortIdx The number of the port on the circuit pack on which the STM-N
facility is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.4 |
| stmnOpticalPwrReceivedMinTh This is the optical power received minimum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.5 |
| stmnOpticalPwrReceivedMaxTh This is the optical power received maximum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.6 |
| stmnOpticalPwrTransmittedMinTh This is the optical power transmitted minimum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.7 |
| stmnOpticalPwrTransmittedMaxTh This is the optical power transmitted maximum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.8 |
| stmnOpticalPwrReceived The optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.7.1.9 |