pvxL2IntfBcastLimit
BTI-7000-MIB ·
.1.3.6.1.4.1.18070.2.2.1.14.1.3.1.29
Object
column
r/w
Integer32
Broadcast rate limit as percentage of the line rate for the port with default value of 100 (no storm control).
Context
- MIB
- BTI-7000-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.14.1.3.1.29- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pvxL2IntfEntry
- Table
- pvxL2IntfTable
- Siblings
- 31
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pvxL2IntfSwitchIdx The number of the switch id of the provisioned ethernet
facility. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.1 |
| pvxL2IntfPvid The PVID (port-based VLAN ID) for the port | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.10 |
| pvxL2IntfRowStatus Used to control the addition and deletion of entries in the
PVX L2 Interface table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.100 |
| pvxL2IntfDefaultPriority This object sets the default priority of the interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.11 |
| pvxL2IntfAllowedFrames TODO: Does this feild need to support OR of the options? | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.12 |
| pvxL2IntfIngressFiltering deprecated When this is true(1) the device will discard incoming frames
for VLANs which do not include this Port in its Member set.
When false(2), the port will accept all incoming frames.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.13 |
| pvxL2IntfCtrlFrmProfileId deprecated | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.14 |
| pvxL2IntfMACAddr The MAC address of the interface. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.15 |
| pvxL2IntfRateLimit This represents the interface rate limit in kilobits/s. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.16 |
| pvxL2IntfCoSProfileId This represents the Class of service profile for the
interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.17 |
| pvxL2IntfIsUNI The Switch port type. The default value set by the switch is neither. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.18 |
| pvxL2IntfSchedProfName The scheduler profile used by the interface. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.19 |
| pvxL2IntfShelfIdx The number of the shelf id of the provisioned ethernet
facility. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.2 |
| pvxL2IntfPriTCMapProfName The priority to traffic class map profile used by the interface. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.20 |
| pvxL2IntfPCPCodingProfName The scheduler profile used by the interface. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.21 |
| pvxL2IntfDscpPHBProfName The internal priority setting for DSCP profile used by the interface. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.22 |
| pvxL2IntfCtrlFrmProfileName The L2 control frame profile used by the interface. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.23 |
| pvxL2IntfUseDei Used by PNP port. By default, it is set to false by the switch. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.24 |
| pvxL2IntfIngressBandwidthProfile The ingress policy map profile used by the interface. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.25 |
| pvxL2IntfEgressBandwidthProfile The egress policy map profile used by the interface. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.26 |
| pvxL2IntfTrustIncomingPCP Used by all port type. By default, it is set to true by the switch. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.27 |
| pvxL2IntfTrustIncomingDscp Used by all port type. By default, it is set to true by the switch. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.28 |
| pvxL2IntfSlotIdx The number of the instance id of the provisioned ethernet
facility. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.3 |
| pvxL2IntfMcastLimit Multicast rate limit as percentage of the line rate for
the port with default value of 100 (no storm control). | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.30 |
| pvxL2IntfDlfLimit Unicast DLF rate limit as percentage of the line rate for
the port with default value of 100 (no storm control). | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.31 |
| pvxL2IntfPortTypeIdx The number of the instance id of the provisioned ethernet
facility. | column | BTI-TC-MIBPvxPortType | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.4 |
| pvxL2IntfPortIdx The number of the port on the circuit pack on which the
ethernet facility is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.5 |
| pvxL2IntfAdminStatus The administrative status of the Ethernet facility. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.6 |
| pvxL2IntfOperStatus The reported operational status of the Ethernet facility. | column | BTI-TC-MIBOperStatus | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.7 |
| pvxL2IntfType This object is used to configure the type of a interface. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.8 |
| pvxL2IntfSTpid The Ethernet type (TPID) of the S-TAG | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.14.1.3.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpTypeIdx The specific type of circuit pack provisioned. | column | BTI-TC-MIBCpType | .1.3.6.1.4.1.18070.2.2.1.3.2.1.1 |
| cpShelfIdx The number of the shelf on which the circuit pack is
provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.3.2.1.2 |
| cpSlotIdx The number of the slot in which the circuit pack is
provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.3.2.1.3 |
| dbBackupAndRestoreAddress The IP address of an ftp server which the NE database is
backed up to, or restored from. This object is used when the
dbBackupAndRestoreType is set to remote. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.18070.2.2.1.11.1.1.3 |
| dbBackupAndRestorePath The directory path on the ftp server where where the NE
database backup is to be saved to, or restored from. This
object is used when the dbBackupAndRestoreType is set to
remote. | scalar | OctetString | .1.3.6.1.4.1.18070.2.2.1.11.1.1.4 |
| dbBackupAndRestoreResult Indicates if the identified stage of the database backup and
restore process has resulted in success or failure. | scalar | Enumeration | .1.3.6.1.4.1.18070.2.2.1.11.1.1.11 |
| evtDateAndTime The date and time at which an event notification was issued by
the system. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.18070.2.2.2.1.1.1 |
| trapSeqNum A integer value indicating the place of the trap notification
message within the continual sequence of all notification
messages issued by the system. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.18070.2.2.2.4.1 |
| evtDescription A textual decription of the event. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.2.1.1.7 |
| evtObjectType Identifies the type of managed object against which the
event notification is raised. | scalar | BTI-TC-MIBNotifObjectType | .1.3.6.1.4.1.18070.2.2.2.1.1.8 |
| evtCodeType This object value uniquely identifies the type of event
that has been generated. | scalar | BTI-TC-MIBNotifCodeType | .1.3.6.1.4.1.18070.2.2.2.1.1.9 |