ospfIfHelloInterval
BTI-7000-MIB ·
.1.3.6.1.4.1.18070.2.2.1.13.3.1.12
Object
column
r/w
seconds Integer32
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
Context
- MIB
- BTI-7000-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.13.3.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- ospfIfEntry
- Table
- ospfIfTable
- Siblings
- 14
Syntax
seconds Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ospfIfSwitchId The number of the switch id on which the OSPF interface
exists. Set to zero if the switchId a switch Id is not
applicable for identification of the OSPF interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.1 |
| ospfIfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. Note that the minimal value SHOULD be
1 second. | column | seconds Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.10 |
| ospfIfRetransInterval The number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descript… | column | seconds Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.11 |
| ospfIfRtrDeadInterval The number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router down.
This should be some multiple of the Hello interval. This
valu… | column | seconds Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.13 |
| ospfIfMetricValue A metric used to identify the 'cost' associated with using
this interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.14 |
| ospfIfStatus This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.18070.2.2.1.13.3.1.15 |
| ospfIfShelfIdx The number of the shelf on which the OSPF interface exists. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.2 |
| ospfIfSlotIdx The number of the slot within the shelf corresponding to
the OSPF interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.3 |
| ospfIfType The type of the interface corresponding to the OSPF
interface. Set to zero if the ospfIfType is not applicable
for identification of the OSPF interface. | column | BTI-TC-MIBPvxPortType | .1.3.6.1.4.1.18070.2.2.1.13.3.1.4 |
| ospfIfIdx The number of the interface within the slot corresponding
to the OSPF interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.5 |
| ospfIfSubIdx The number of the sub-interface that the OSFP Interface
corresponds to. Set to zero if the ospfIfSubIdx is not
applicable for identification of the OSPF interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.6 |
| ospfIfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone. | column | BTI-TC-MIBAreaID | .1.3.6.1.4.1.18070.2.2.1.13.3.1.7 |
| ospfIfAdminStat The OSPF interface's administrative status.
The value formed on the interface, and the interface
will be advertised as an internal route to some area.
The value 'disabled' denotes… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.13.3.1.8 |
| ospfIfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi… | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.13.3.1.9 |