oaVariableOpticalAttenuation
BTI-7000-MIB ·
.1.3.6.1.4.1.18070.2.2.1.4.1.1.40
Object
The variable optical attenuation of the amplifier.
Context
- MIB
- BTI-7000-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.4.1.1.40- Type
- column
- Access
- readonly
- Status
- current
- Units
- dB/10
- Parent
- oaEntry
- Table
- oaTable
- Siblings
- 51
Syntax
dB/10 BTI-TC-MIBFixedX10
- Source
- BTI-TC-MIBFixedX10
- Base type
Integer32
Values & Constraints
Object Constraints
range: 1-1
range: 11-11
range: 21-21
range: 31-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oaTypeIdx The specific type of optical amplifier provisioned. | column | BTI-TC-MIBOaType | .1.3.6.1.4.1.18070.2.2.1.4.1.1.1 |
| oaOpticalPwrReceivedMaxTh The optical power received maximum threshold. A default value
is provided when the optical amplifier is created based on the
optical amplifier type provisioned. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.10 |
| oaRowStatus Used to control the addition and deletion of entries in the
optical amplifier table, which in turn controls provisioning
and deprovisioning of optical amplifier facilities. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.18070.2.2.1.4.1.1.100 |
| oaSSIOpticalPwrReceivedMaxTh The secondary stage input optical power received maximum
threshold. This object is applicable only to OLAM type
amplifiers. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.11 |
| oaOpticalPwrTransmittedMinTh The optical power transmitted minimum threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.12 |
| oaOpticalPwrTransmittedMaxTh The optical power transmitted maximum threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.13 |
| oaBackReflectionSafetyTh The optical back reflection safety threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.14 |
| oaMSInsertionLossMaxTh This is the mid-stage maximum insertion loss signal threshold.
It applies to mid-stage access amplifiers only. | column | dB/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.15 |
| oaCaseTemp The optical amplifier case temperature. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.16 |
| oaLaser1Temp The temperature of the optical amplifier laser 1. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.17 |
| oaLaser2Temp The temperature of the optical amplifier laser 2. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.18 |
| oaOpticalPwrReceived The optical power received on the input of the amplifier. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.19 |
| oaShelfIdx The number of the shelf on which the optical amplifier
facility is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.2 |
| oaSSIOpticalPwrReceived The optical power received on the second stage of the
amplifier. It applies to mid-stage access amplifiers only. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.20 |
| oaOpticalPwrTransmitted The optical power transmitted at the output of the amplifier. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.21 |
| oaMSInsertionLoss The mid-stage insertion loss. This object is only applicable
to OLAM type amplifiers. | column | dB/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.22 |
| oaSlotIdx The number of the slot in which the optical amplifier facility
is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.3 |
| oaEffectiveGain The effective gain level of the optical amplifier. | column | dB/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.33 |
| oaFSOOpticalPwrTransmitted The optical power transmitted at the output of the first stage
of the amplifier. It applies to mid-stage access amplifiers
only. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.34 |
| oaLaser1Current The optical amplifier laser 1 current. | column | mAmp/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.35 |
| oaLaser2Current The optical amplifier laser 2 current. | column | mAmp/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.36 |
| oaLaser1Power The optical amplifier laser 1 power. | column | mWatts/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.37 |
| oaLaser2Power The optical amplifier laser 2 power. | column | mWatts/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.38 |
| oaOpticalBackReflection The optical back reflection of the amplifier. | column | dB/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.39 |
| oaIdx The number of the port on the circuit pack on which the
optical amplifier facility is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.4 |
| oaAdminStatus The administrative status of the optical amplifier. | column | BTI-TC-MIBAdminStatus | .1.3.6.1.4.1.18070.2.2.1.4.1.1.41 |
| oaOperStatus The reported operational status of the optical amplifier. | column | BTI-TC-MIBOperStatus | .1.3.6.1.4.1.18070.2.2.1.4.1.1.42 |
| oaOperStatQlfr A textual list of qualifiers of the reported operational
status of the optical amplifier. | column | BTI-TC-MIBOperStatQlfr | .1.3.6.1.4.1.18070.2.2.1.4.1.1.43 |
| oaAutoEnableTimer Specifies the auto-enable timer for the targeted optical
amplifier. This value only applies if the oaAdminStatus object
is set to autoEnabled. Otherwise, the value returned is
000… | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.4.1.1.44 |
| oaActAutoEnableTimer Indicates the time remaining on the auto-enable timer, if it
is actively counting down. Otherwise, the value returned is
000-00. | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.4.1.1.45 |
| oaModeSetting The desired mode of operation to which this optical amplifier
is set. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.1.1.46 |
| oaGainSetting The effective gain (excluding ASE) set point. A default value
is provided when the optical amplifier is created based on the
optical amplifier type provisioned. | column | dB BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.47 |
| oaPwrSetting The signal output power (excluding ASE) set point. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned. | column | dBm BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.48 |
| oaTiltCompSetting The desired tilt compensation to which this optical amplifier
is set. | column | dB BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.49 |
| oaCaseTempMaxTh The case temperature threshold. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.5 |
| oaStatus The specific operational status of the amplifier. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.1.1.50 |
| oaLaserStatus The actual operational status of the optical amplifier laser. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.1.1.51 |
| oaId1 Textual data recorded by the user to describe the provisioned
optical amplifier in a manner useful to the user. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.1.1.52 |
| oaId2 Textual data recorded by the user to describe the provisioned
optical amplifier in a manner useful to the user. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.1.1.53 |
| oaFiberType An optional specification of the fiber type that interfaces
with the optical amplifier. | column | BTI-TC-MIBFiberType | .1.3.6.1.4.1.18070.2.2.1.4.1.1.54 |
| oaGrid An optional indication of the WDM grid to which the link
conforms. | column | BTI-TC-MIBWDMGrid | .1.3.6.1.4.1.18070.2.2.1.4.1.1.55 |
| oaNumChannels An optional indication of the number of channels that the link
is carrying. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.56 |
| oaCustom1 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.1.1.57 |
| oaCustom2 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.1.1.58 |
| oaCustom3 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.1.1.59 |
| oaCaseTempMaxShutdownTh The case temperature shutdown threshold. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.6 |
| oaWavelength The wavelength transmitted from the OA port. This object
applies only to single channel amplifiers (sba, spa). | column | BTI-TC-MIBFixedX100 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.60 |
| oaRemoteId Identifies the remote node and port to which the
optical amplifier port is connected, in the format
prescribed by the PSM network management system. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.1.1.61 |
| oaLaserTempMinShutdownTh The laser temperature minimum shutdown threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.7 |
| oaLaserTempMaxShutdownTh The laser temperature maximum shutdown threshold. A default
value is provided when the optical amplifier is created based
on the optical amplifier type provisioned. | column | degrees Celsius Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.8 |
| oaOpticalPwrReceivedMinTh The optical power received minimum threshold. A default value
is provided when the optical amplifier is created based on the
optical amplifier type provisioned. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.1.1.9 |