networkElement

BTI-7000-MIB · .1.3.6.1.4.1.18070.2.2.1.1
MIB view Table view

Object

node

No description available.

Context

MIB
BTI-7000-MIB
OID
.1.3.6.1.4.1.18070.2.2.1.1
Type
node
Parent
objects
Siblings
15
Children
15

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
protectionnode-.1.3.6.1.4.1.18070.2.2.1.10
operationsnode-.1.3.6.1.4.1.18070.2.2.1.11
synchronizationnode-.1.3.6.1.4.1.18070.2.2.1.12
topologynode-.1.3.6.1.4.1.18070.2.2.1.13
pvxObjectsnode-.1.3.6.1.4.1.18070.2.2.1.14
miscellaneousnode-.1.3.6.1.4.1.18070.2.2.1.15
opticalLayernode-.1.3.6.1.4.1.18070.2.2.1.16
inventorynode-.1.3.6.1.4.1.18070.2.2.1.2
equipmentnode-.1.3.6.1.4.1.18070.2.2.1.3
facilitiesnode-.1.3.6.1.4.1.18070.2.2.1.4
dataCommsnode-.1.3.6.1.4.1.18070.2.2.1.5
performancenode-.1.3.6.1.4.1.18070.2.2.1.6
conditionsnode-.1.3.6.1.4.1.18070.2.2.1.7
administrationnode-.1.3.6.1.4.1.18070.2.2.1.8
connectionsnode-.1.3.6.1.4.1.18070.2.2.1.9
Child Objects
ObjectTypeSyntaxOID
neSWVersion
The software version that is active on the NE currently.
scalarOctetString.1.3.6.1.4.1.18070.2.2.1.1.1
neAutoProv
A setting that specifies if automatic provisioning of equipment and facilities is enabled. If automatic provisioning is enabled, this object indicates the default administration s…
scalarEnumeration.1.3.6.1.4.1.18070.2.2.1.1.10
neAutoDeProv obsolete
The time delay after a physical shelf or circuit pack is removed from the NE before the provisioned entities that are supported by the removed equipment are automatically deprovis…
scalarBTI-TC-MIBHoursAndMinutes.1.3.6.1.4.1.18070.2.2.1.1.11
neAutoEnabledTimer
The system wide default auto-enable timer value. This timer specifies a time delay after a provisioned facility in the auto-enabled state is cleared of all alarms before the state…
scalarBTI-TC-MIBHoursAndMinutes.1.3.6.1.4.1.18070.2.2.1.1.12
ntpClientnode-.1.3.6.1.4.1.18070.2.2.1.1.13
neFPDetect
A setting that indicates whether the system should report pack missing alarms.
scalarEnumeration.1.3.6.1.4.1.18070.2.2.1.1.14
neHTAutoShutdown
A system wide setting that specifies whether the circuit pack pack high temperature automatic shutdown (HTAS) is enabled. When enabled, the circuit packs which support the HTAS …
scalarEnumeration.1.3.6.1.4.1.18070.2.2.1.1.15
neNum
This is a unique network element number used to identify the network element and to differentiate it from other NEs in the management domain.
scalarInteger32.1.3.6.1.4.1.18070.2.2.1.1.2
neSiteNum
This is a network element site number used to uniquely identify the site of the NE and to differentiate it from other NE sites in the management domain.
scalarInteger32.1.3.6.1.4.1.18070.2.2.1.1.3
neDateAndTime
The current system date and time, without time zone information.
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.1.4
neTimeZone
The time zone in which the local time of this system is to be reported. Typically, the time zone is the one in which the system is physically located.
scalarBTI-TC-MIBTimeZone.1.3.6.1.4.1.18070.2.2.1.1.5
neAutoDST
A setting that indicates whether the system time should be updated automatically in accordance with the daylight savings time characteristics of the current time zone.
scalarEnumeration.1.3.6.1.4.1.18070.2.2.1.1.6
neGateway
The default IP routing gateway for network management interfaces on the node. If not specified, this object returns a value of 0.0.0.0.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.18070.2.2.1.1.7
neSecGateway
The secondary IP routing gateway for network management interfaces on the node. If not specified, this object returns a value of 0.0.0.0.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.18070.2.2.1.1.8
neActiveGateway
The IP routing gateway that is currently active on the node. If no gateway is active, this object returns a value of 0.0.0.0.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.18070.2.2.1.1.9