geHistPMSupplyVoltageValue

BTI-7000-MIB · .1.3.6.1.4.1.18070.2.2.1.6.21.1.15
MIB view Table view

Object

column mVolts/10 BTI-TC-MIBFixedX10 
The supply voltage measured on the GE facility port.

Context

MIB
BTI-7000-MIB
OID
.1.3.6.1.4.1.18070.2.2.1.6.21.1.15
Type
column
Access
readonly
Status
current
Units
mVolts/10
Parent
geHistPMEntry
Table
geHistPMTable
Siblings
143

Syntax

mVolts/10 BTI-TC-MIBFixedX10
Source
BTI-TC-MIBFixedX10
Base type
Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
geHistPMShelfIdx
The number of the shelf on which the GE facility targeted for PMs is provisioned.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.6.21.1.1
geHistPMOPTTimeStamp
The date and time stamp of the optical power transmitted value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.10
geHistPMOSIZETimeStamp
The date and time stamp of the count of oversized packets.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.100
geHistPMOSIZEValidity
Indicates the validity of the provided count of oversized packets.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.101
geHistPMFRGTValue
The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.102
geHistPMFRGTTimeStamp
The date and time stamp of the count of received packet fragments.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.103
geHistPMFRGTValidity
Indicates the validity of the provided count of received packet fragments.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.104
geHistPMJABRValue
The total number of frames received that were longer than 14336 9600 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) wit…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.105
geHistPMJABRTimeStamp
The date and time stamp of the count of received jabbers.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.106
geHistPMJABRValidity
Indicates the validity of the provided count of received jabbers.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.107
geHistPMCVInitialize
Used to initialize the value of the geHistPMCVValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.108
geHistPMESInitialize
Used to initialize the value of the geHistPMESValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.109
geHistPMOPTValidity
Indicates the validity of the provided optical power transmitted value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.11
geHistPMSESInitialize
Used to initialize the value of the geHistPMSESValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.110
geHistPMFCSEInitialize
Used to initialize the value of the geHistPMFCSEValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.111
geHistPMFRDRInitialize
Used to initialize the value of the geHistPMFRDRValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.112
geHistPMUSIZEInitialize
Used to initialize the value of the geHistPMUSIZEValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.113
geHistPMOSIZEInitialize
Used to initialize the value of the geHistPMOSIZEValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.114
geHistPMFRGTInitialize
Used to initialize the value of the geHistPMFRGTValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.115
geHistPMJABRInitialize
Used to initialize the value of the geHistPMJABRValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.116
geHistPMUASValue
The count of unavailable seconds. This object applies only to transciever ports provisioned for the gigabit ethernet protocol.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.117
geHistPMUASTimeStamp
The date and time stamp of the unavailable seconds value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.118
geHistPMUASValidity
Indicates the validity of the provided unavailable seconds value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.119
geHistPMTempValue
The temperature measured on the GE facility port.
columndegrees Celsius Integer32.1.3.6.1.4.1.18070.2.2.1.6.21.1.12
geHistPMUASInitialize
Used to initialize the value of the geHistPMUASValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.120
geHistPMOPRMinValue
The minimum optical power received on the input of the transceiver.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.121
geHistPMOPRMinTimeStamp
The date and time stamp of the minimum optical power received value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.122
geHistPMOPRMinValidity
Indicates the validity of the provided minimum optical power received value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.123
geHistPMOPRMinInitialize
Used to initialize the value of the geHistPMOPRMinValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.124
geHistPMOPRMaxValue
The maximum optical power received on the input of the transceiver.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.125
geHistPMOPRMaxTimeStamp
The date and time stamp of the maximum optical power received value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.126
geHistPMOPRMaxValidity
Indicates the validity of the provided maximum optical power received value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.127
geHistPMOPRMaxInitialize
Used to initialize the value of the geHistPMOPRMaxValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.128
geHistPMOPRAvgValue
The average optical power received on the input of the transceiver.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.129
geHistPMTempTimeStamp
The date and time stamp of the temperature value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.13
geHistPMOPRAvgTimeStamp
The date and time stamp of the average optical power received value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.130
geHistPMOPRAvgValidity
Indicates the validity of the provided average optical power received value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.131
geHistPMOPRAvgInitialize
Used to initialize the value of the geHistPMOPRAvgValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.132
geHistPMOPTMinValue
The minimum optical power transmitted at the output of the transceiver.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.133
geHistPMOPTMinTimeStamp
The date and time stamp of the minimum optical power transmitted value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.134
geHistPMOPTMinValidity
Indicates the validity of the provided minimum optical power transmitted value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.135
geHistPMOPTMinInitialize
Used to initialize the value of the geHistPMOPTMinValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.136
geHistPMOPTMaxValue
The maximum optical power transmitted at the output of the transceiver.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.137
geHistPMOPTMaxTimeStamp
The date and time stamp of the maximum optical power transmitted value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.138
geHistPMOPTMaxValidity
Indicates the validity of the provided maximum optical power transmitted value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.139
geHistPMTempValidity
Indicates the validity of the provided temperature value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.14
geHistPMOPTMaxInitialize
Used to initialize the value of the geHistPMOPTMaxValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.140
geHistPMOPTAvgValue
The average optical power transmitted at the output of the transceiver.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.141
geHistPMOPTAvgTimeStamp
The date and time stamp of the average optical power transmitted value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.142
geHistPMOPTAvgValidity
Indicates the validity of the provided average optical power transmitted value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.143
geHistPMOPTAvgInitialize
Used to initialize the value of the geHistPMOPTAvgValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.144
geHistPMSupplyVoltageTimeStamp
The date and time stamp of the supply voltage value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.16
geHistPMSupplyVoltageValidity
Indicates the validity of the provided supply voltage value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.17
geHistPMLBCValue
The laser bias current measured on the GE facility port.
columnmAmp Integer32.1.3.6.1.4.1.18070.2.2.1.6.21.1.18
geHistPMLBCTimeStamp
The date and time stamp of the laser bias current value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.19
geHistPMSlotIdx
The number of the slot within which the GE facility targeted for PMs is provisioned.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.6.21.1.2
geHistPMLBCValidity
Indicates the validity of the provided laser bias current value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.20
geHistPMCVValue
The count of Gigabit Ethernet 8B/10B coding violations.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.21
geHistPMCVTimeStamp
The date and time stamp of the GE coding violations value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.22
geHistPMCVValidity
Indicates the validity of the provided GE coding violations value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.23
geHistPMESValue
The count of GE errored seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.24
geHistPMESTimeStamp
The date and time stamp of the GE errored seconds value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.25
geHistPMESValidity
Indicates the validity of the provided GE errored seconds value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.26
geHistPMSESValue
The count of GE severely errored seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.27
geHistPMSESTimeStamp
The date and time stamp of the GE severely errored seconds value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.28
geHistPMSESValidity
Indicates the validity of the provided GE severely errored seconds value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.29
geHistPMPortIdx
The number of the port on the circuit pack on which the GE facility targeted for PMs is provisioned.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.6.21.1.3
geHistPMTFRCRXValue
The Gigabit Ethernet total received byte count.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.30
geHistPMTFRCRXTimeStamp
The date and time stamp of the GE total received byte count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.31
geHistPMTFRCRXValidity
Indicates the validity of the provided GE total received byte count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.32
geHistPMTFRCRXInitialize
Used to initialize the value of the geHistPMTBYCRXValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.33
geHistPMTFRCTXValue
The Gigabit Ethernet total transmitted frame count.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.34
geHistPMTFRCTXTimeStamp
The date and time stamp of the GE total transmitted frame count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.35
geHistPMTFRCTXValidity
Indicates the validity of the provided GE total transmitted frame count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.36
geHistPMTFRCTXInitialize
Used to initialize the value of the geHistPMTFRCTXValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.37
geHistPMFRDRValue
The count of Gigabit Ethernet discarded frames.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.38
geHistPMFRDRTimeStamp
The date and time stamp of the GE discarded frames value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.39
geHistPMIntervalTypeIdx
The type of PM bin according to interval length.
columnBTI-TC-MIBPMIntervalType.1.3.6.1.4.1.18070.2.2.1.6.21.1.4
geHistPMFRDRValidity
Indicates the validity of the provided GE discarded frames value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.40
geHistPMFCSEValue
The count of Gigabit Ethernet frame checksum errors.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.41
geHistPMFCSETimeStamp
The date and time stamp of the GE frame checksum errors value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.42
geHistPMFCSEValidity
Indicates the validity of the provided GE frame checksum errors value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.43
geHistPMTBYCRXValue
The Gigabit Ethernet total received byte count.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.44
geHistPMTBYCRXTimeStamp
The date and time stamp of the GE total received byte count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.45
geHistPMTBYCRXValidity
Indicates the validity of the provided GE total received byte count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.46
geHistPMTBYCRXInitialize
Used to initialize the value of the geHistPMTBYCRXValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.47
geHistPMTBYCTXValue
The Gigabit Ethernet total transmitted byte count.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.48
geHistPMTBYCTXTimeStamp
The date and time stamp of the GE total transmitted byte count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.49
geHistPMIntervalIdx
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
columnInteger32.1.3.6.1.4.1.18070.2.2.1.6.21.1.5
geHistPMTBYCTXValidity
Indicates the validity of the provided GE total transmitted byte count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.50
geHistPMTBYCTXInitialize
Used to initialize the value of the geHistPMTBYCTXValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.51
geHistPMBCSTValue
The total number of good frames received that were directed to the broadcast address. Note that this does not include multicast frames.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.52
geHistPMBCSTTimeStamp
The date and time stamp of the broadcast packets received count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.53
geHistPMBCSTValidity
Indicates the validity of the provided broadcast packets received count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.54
geHistPMBCSTInitialize
Used to initialize the value of the geHistPMBCSTValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.55
geHistPMMCSTValue
The total number of good frames received that were directed to a multicast address. Note that this number does not include frames directed to the broadcast address.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.56
geHistPMMCSTTimeStamp
The date and time stamp of the multicast packets received count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.57
geHistPMMCSTValidity
Indicates the validity of the provided multicast packets received count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.58
geHistPMMCSTInitialize
Used to initialize the value of the geHistPMMCSTValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.59
geHistPMOPRValue
The optical power received on the input of the GE facility port.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.6
geHistPMSIZE64Value
The total number of 64 byte frames received (excluding framing bits but including FCS octets).
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.60
geHistPMSIZE64TimeStamp
The date and time stamp of the count of 64-byte packets received.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.61
geHistPMSIZE64Validity
Indicates the validity of the provided count of 64-byte packets packets received.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.62
geHistPMSIZE64Initialize
Used to initialize the value of the geHistPMSIZE64Value object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.63
geHistPMSIZE65To127Value
The total number of frames received that are 65 to 127 bytes inclusive in length (excluding framing bits but including FCS octets).
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.64
geHistPMSIZE65To127TimeStamp
The date and time stamp of the count of packets between 65 and 127 bytes.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.65
geHistPMSIZE65To127Validity
Indicates the validity of the provided count of packets between 65 and 127 bytes.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.66
geHistPMSIZE65To127Initialize
Used to initialize the value of the geHistPMSIZE65To127Value object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.67
geHistPMSIZE128To255Value
The total number of frames received that are 128 to 255 bytes inclusive in length (excluding framing bits but including FCS octets).
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.68
geHistPMSIZE128To255TimeStamp
The date and time stamp of the count of packets between 128 and 255 bytes.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.69
geHistPMOPRTimeStamp
The date and time stamp of the optical power received value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.7
geHistPMSIZE128To255Validity
Indicates the validity of the provided count of packets between 128 and 255 bytes.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.70
geHistPMSIZE128To255Initialize
Used to initialize the value of the geHistPMSIZE128To255Value object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.71
geHistPMSIZE256To511Value
The total number of frames received that are 256 to 511 bytes inclusive in length (excluding framing bits but including FCS octets).
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.72
geHistPMSIZE256To511TimeStamp
The date and time stamp of the count of packets between 256 and 511 bytes.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.73
geHistPMSIZE256To511Validity
Indicates the validity of the provided count of packets between 256 and 511 bytes.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.74
geHistPMSIZE256To511Initialize
Used to initialize the value of the geHistPMSIZE256To511Value object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.75
geHistPMSIZE512To1023Value
The total number of frames received that are 512 to 1023 bytes inclusive in length (excluding framing bits but including FCS octets).
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.76
geHistPMSIZE512To1023TimeStamp
The date and time stamp of the count of packets between 512 and 1023 bytes.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.77
geHistPMSIZE512To1023Validity
Indicates the validity of the provided count of packets between 512 and 1023 bytes.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.78
geHistPMSIZE512To1023Initialize
Used to initialize the value of the geHistPMSIZE512To1023Value object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.79
geHistPMOPRValidity
Indicates the validity of the provided optical power received value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.8
geHistPMSIZE1024To1518Value
The total number of frames received that are 1024 to 1518 bytes inclusive in length (excluding framing bits but including FCS octets).
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.80
geHistPMSIZE1024To1518TimeStamp
The date and time stamp of the count of packets between 1024 and 1518 bytes.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.81
geHistPMSIZE1024To1518Validity
Indicates the validity of the provided count of packets between 1024 and 1518 bytes.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.82
geHistPMSIZE1024To1518Initialize
Used to initialize the value of the geHistPMSIZE1024To1518Value object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.83
geHistPMSIZEOver1518Value
The total number of frames received that are greater than or equal to 1519 bytes in length (excluding framing bits but including FCS octets).
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.84
geHistPMSIZEOver1518TimeStamp
The date and time stamp of the count of packets over 1518 bytes.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.85
geHistPMSIZEOver1518Validity
Indicates the validity of the provided count of packets over 1518 bytes.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.86
geHistPMSIZEOver1518Initialize
Used to initialize the value of the geHistPMSIZEOver1518Value object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.87
geHistPMTPFCRXValue
The Gigabit Ethernet total received pause frame count.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.88
geHistPMTPFCRXTimeStamp
The date and time stamp of the GE total received pause frame count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.89
geHistPMOPTValue
The optical power transmitted at the output of the GE facility port.
columndBm/10 BTI-TC-MIBFixedX10.1.3.6.1.4.1.18070.2.2.1.6.21.1.9
geHistPMTPFCRXValidity
Indicates the validity of the provided GE total received pause frame count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.90
geHistPMTPFCRXInitialize
Used to initialize the value of the geHistPMTPFCRXValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.91
geHistPMTPFCTXValue
The Gigabit Ethernet total transmitted pause frame count.
columnBTI-TC-MIBUnsigned64.1.3.6.1.4.1.18070.2.2.1.6.21.1.92
geHistPMTPFCTXTimeStamp
The date and time stamp of the GE total transmitted pause frame count value.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.93
geHistPMTPFCTXValidity
Indicates the validity of the provided GE total transmitted pause frame count value.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.94
geHistPMTPFCTXInitialize
Used to initialize the value of the geHistPMTPFCTXValue object to 0.
columnBTI-TC-MIBInitializeCmd.1.3.6.1.4.1.18070.2.2.1.6.21.1.95
geHistPMUSIZEValue
The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.96
geHistPMUSIZETimeStamp
The date and time stamp of the count of undersized packets.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.18070.2.2.1.6.21.1.97
geHistPMUSIZEValidity
Indicates the validity of the provided count of undersized packets.
columnBTI-TC-MIBPMValidity.1.3.6.1.4.1.18070.2.2.1.6.21.1.98
geHistPMOSIZEValue
The total number of frames received that were longer than 9600 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.18070.2.2.1.6.21.1.99