ethIntfLldpRemPortIdSubtype
BTI-7000-MIB ·
.1.3.6.1.4.1.18070.2.2.1.4.14.1.48
Object
column
BTI-TC-MIBLldpPortIdSubtype
The type of port identifier encoding used in the associated 'ethIntfLldpRemPortId' object.
Context
- MIB
- BTI-7000-MIB
- OID
.1.3.6.1.4.1.18070.2.2.1.4.14.1.48- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ethIntfEntry
- Table
- ethIntfTable
- Siblings
- 46
Syntax
BTI-TC-MIBLldpPortIdSubtype
- Source
- BTI-TC-MIBLldpPortIdSubtype
- Base type
Enumeration
Values & Constraints
Type Values
1 | interfaceAlias |
2 | portComponent |
3 | macAddress |
4 | networkAddress |
5 | interfaceName |
6 | agentCircuitId |
7 | local |
8 | notPresent |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethIntfShelfIdx The number of the shelf in which the Ethernet facility
resides. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.1 |
| ethIntfOpticalPwrTransmitted The optical power transmitted at the output of the
transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.10 |
| ethIntfRowStatus Used to control the addition and deletion of entries in the
Ethernet table, which in turn controls provisioning and
deprovisioning of Ethernet facilities. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.18070.2.2.1.4.14.1.100 |
| ethIntfPEC An optionally provisioned transceiver Product Equipment Code
used to validate the physically present transceiver on the
Ethernet port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.14.1.11 |
| ethIntfAdminStatus The administrative status of the Ethernet facility. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.12 |
| ethIntfOperStatus The reported operational status of the Ethernet facility. | column | BTI-TC-MIBOperStatus | .1.3.6.1.4.1.18070.2.2.1.4.14.1.13 |
| ethIntfOperStatQlfr This is a textual list of qualifiers about the reported
operational status of the Ethernet facility. | column | BTI-TC-MIBOperStatQlfr | .1.3.6.1.4.1.18070.2.2.1.4.14.1.14 |
| ethIntfAutoEnableTimer Specifies the auto-enable timer for the targeted Ethernet
facility. This value only applies if the AdminStatus object is
set to autoEnabled. Otherwise, the value returned is 000-0… | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.4.14.1.15 |
| ethIntfActAutoEnableTimer Indicates the time remaining on the auto-enable timer if it is
actively counting down. Otherwise, the value returned is
000-00. | column | BTI-TC-MIBHoursAndMinutes | .1.3.6.1.4.1.18070.2.2.1.4.14.1.16 |
| ethIntfWavelength The wavelength to be transmitted by the transceiver on the
Gigabit Ethernet facility port. This is a mandatory object
when a row of the Ethernet table is created. | column | BTI-TC-MIBFixedX100 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.17 |
| ethIntfVendorPN1 An optionally provisioned part number used to validate the
optical transceiver on the Ethernet facility port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.14.1.18 |
| ethIntfVendorPN2 An optionally provisioned part number used to validate the
optical transceiver on the Ethernet facility port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.14.1.19 |
| ethIntfSlotIdx The number of the slot in which the Ethernet facility
resides. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.2 |
| ethIntfVendorPN3 An optionally provisioned part number used to validate the
optical transceiver on the Ethernet facility port. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.14.1.20 |
| ethIntfPhyPMMon Indicates if the Ethernet facility is configured to report
threshold crossing conditions for physical layer performance
monitoring parameters. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.21 |
| ethIntfFPSD Indicates if the Ethernet facility is configured for Fault
Propagation Shut Down. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.22 |
| ethIntfLaserStatus An indication of the operational status of the transceiver
laser on the Ethernet facility port. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.23 |
| ethIntfId1 Textual data recorded by the user to describe the provisioned
facility in a manner useful to the user. | column | OctetString | .1.3.6.1.4.1.18070.2.2.1.4.14.1.24 |
| ethIntfFiberType An optional specification of the fiber type that interfaces to
the Ethernet facility port. | column | BTI-TC-MIBFiberType | .1.3.6.1.4.1.18070.2.2.1.4.14.1.25 |
| ethIntfCustom1 A variable length text string for operating company use. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.14.1.26 |
| ethIntfSpeed The speed of the Ethernet facility link. This object is
mandatory to create a new facility and determines the type of
interface, based on speed. | column | Mbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.27 |
| ethIntfDuplex The duplex mode of the Ethernet facility interface. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.28 |
| ethIntfMediaRate The configured media rate of the Ethernet facility interface.
For 10 GE interfaces, the media rate can only be autoNegotiated. | column | BTI-TC-MIBMediaRateType | .1.3.6.1.4.1.18070.2.2.1.4.14.1.29 |
| ethIntfPortTypeIdx The type of the port on the circuit pack. | column | BTI-TC-MIBPvxL1PortType | .1.3.6.1.4.1.18070.2.2.1.4.14.1.3 |
| ethIntfMTU The MTU size for the Ethernet facility interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.30 |
| ethIntfLinkStatus This object provides the link status information regarding the
particular interface. | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.31 |
| ethIntfLagId This object provides the information regarding the LAG Id of
the particular interface. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.32 |
| ethIntfLagPortPriority This object provides the information for lag port priority of
the particular interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.33 |
| ethIntfBER The Signal Degrade Bit Error Ratio (SDBER) is used to
configure the error rate threshold above which a Signal
Degrade is declared. | column | BTI-TC-MIBBERType | .1.3.6.1.4.1.18070.2.2.1.4.14.1.37 |
| ethIntfMACAddr The MAC address of the interface. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.18070.2.2.1.4.14.1.39 |
| ethIntfPortIdx The number of the port on the circuit pack on which the
ethernet facility is provisioned. | column | Integer32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.4 |
| ethIntfLineMapping For 10 GE interfaces, both 10 GE LAN PHY and OTU2 encapsulated
10GE LAN PHY will be supported. The line mapping attribute
allow provisioning of either of the protocol. This attrib… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.40 |
| ethIntfErrorCorrection For 10G in OTU2 line-mapping mode, this object specifies
the error correction mode. For interfaces in tenlanphy
line-mapping mode, this object must be none. Attempts to
set it to… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.41 |
| ethIntfLpbkOpCmd Used to perform a loopback operation on a transceiver facility
as follows:
- oprLpbk: operates a loopback on the transceiver
- rlsLpbk: causes a previously invoked loopback to be … | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.42 |
| ethIntfRemoteId Identifies the remote node and port to which the
PVX ethernet port is connected, in the format
prescribed by the PSM network management system. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.18070.2.2.1.4.14.1.43 |
| ethIntfMirrorConfig Mirror configuration for the physical ethernet port | column | BTI-TC-MIBMirrorConfigType | .1.3.6.1.4.1.18070.2.2.1.4.14.1.44 |
| ethIntfLldpAdminStatus The administratively desired status of the local LLDP agent.
If the associated ethIntfLldpAdminStatus object has a
value of 'enabled(1)', then the LLDP agent will t… | column | Enumeration | .1.3.6.1.4.1.18070.2.2.1.4.14.1.45 |
| ethIntfLldpRemChassisIdSubtype The type of encoding used to identify the chassis associated
with the remote system. | column | BTI-TC-MIBLldpChassisIdSubtype | .1.3.6.1.4.1.18070.2.2.1.4.14.1.46 |
| ethIntfLldpRemChassisId The string value used to identify the chassis component
associated with the remote system. | column | BTI-TC-MIBLldpChassisId | .1.3.6.1.4.1.18070.2.2.1.4.14.1.47 |
| ethIntfLldpRemPortId The string value used to identify the port component
associated with the remote system. | column | BTI-TC-MIBLldpPortId | .1.3.6.1.4.1.18070.2.2.1.4.14.1.49 |
| ethIntfOpticalPwrReceivedMinTh This is the optical power received minimum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.5 |
| ethIntfBouncingStateChangeCount Count of the Ethernet facility operational state changes sinse last reboot | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.50 |
| ethIntfOpticalPwrReceivedMaxTh This is the optical power received maximum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.6 |
| ethIntfOpticalPwrTransmittedMinTh This is the optical power transmitted minimum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.7 |
| ethIntfOpticalPwrTransmittedMaxTh This is the optical power transmitted maximum threshold. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.8 |
| ethIntfOpticalPwrReceived The optical power received on the input of the transceiver. | column | dBm/10 BTI-TC-MIBFixedX10 | .1.3.6.1.4.1.18070.2.2.1.4.14.1.9 |