brpsTCPIPAccessTable

BROTHER-MIB · .1.3.6.1.4.1.2435.2.4.3.1240.5.2.18

Object

table mandatory

This table represents the list of IP address of node that has 
parmittion for access.Up to 16 Netware addresses can be enabled.

Context

MIB: BROTHER-MIB
OID: .1.3.6.1.4.1.2435.2.4.3.1240.5.2.18
Type: table
Status: mandatory
Parent: brtcpip
Siblings: 21
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
brpsTCPIPSupported mandatory 0 indicates the TCP/IP protocol is not supported. 1 indicates TCP/IP support is implemented by the firmware	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.1`
brpsTCPIPRARPNoSubnet mandatory If enabled, do not set the subnet mask based on the RARP response.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.10`
brpsTCPIPRARPNoGateway mandatory If enabled, do not set the gateway/router address based on the RARP response.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.11`
brpsTCPIPUpdate mandatory Hardware MAC address to be updated. This value is write only. Will read back as zeros.	scalar	OctetString	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.12`
brpsTCPIPBanner mandatory 0 indicates the LPR banner print is not enabled. 1 indicates that the LPR banner print is enabled.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.13`
brpsTCPIPFastTimeoutEnable mandatory 0 indicates the fast timeout is not enabled. 1 indicates that the fast timeout is enabled.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.14`
brpsTCPIPLPRRetryEnable mandatory 0 indicates the LPR print retry is not enabled. 1 indicates that the LPR print retry is enabled.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.15`
brpsTCPIPUseMethod mandatory Method type that used set up TCP/IP configuration.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.16`
brpsTCPIPMethodServer mandatory If TCP/IP configuration is setted up by any protocol server, this entry indicates the IP address of the server.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.17`
brpsAdvancedTCPIPAccessSupported mandatory 0 indicates the Advanced TCP/IP Access is not supported. 1 indicates Advanced TCP/IP Access support is implemented by the firmware	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.19`
brpsTCPIPEnable mandatory 0 indicates the TCP/IP protocol is not enabled. 1 indicates that the TCP/IP protocol is enabled. Writing a non-zero value will enable the TCP/IP protocol if it is supported by the…	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.2`
brpsAdvancedTCPIPAccessEnable mandatory 0 indicates the Advanced TCP/IP Access is not enabled. 1 indicates that the Advanced TCP/IP Access is enabled.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.20`
brpsAdvancedTCPIPAccessAdministratorIPAddress mandatory Administrator IPAddress.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.21`
brpsAdvancedTCPIPAccessSetting mandatory 0 indicates the Advanced TCP/IP Access is reject. 1 indicates that the Advanced TCP/IP Access is Accept.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.22`
brpsTCPIPAddress mandatory IP Address assigned to the print server.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.3`
brpsTCPIPSubnetMask mandatory Subnet mask assigned to the print server.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.4`
brpsTCPIPGateway mandatory Gateway/Router address assigned to the print server.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.5`
brpsTCPIPMethod mandatory Method used to determine the IP Address. AUTO tries all protocols. STATIC uses the configured address. DHCP, BOOTP, and RARP use only that protocol.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.6`
brpsTCPIPTimeout mandatory Timeout used for LPD connections.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.7`
brpsTCPIPBootTries mandatory Number of attempts to use BOOTP, RARP, and DHCP.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.8`
brpsTCPIPMaxWindow mandatory Maximum window size for TCP connections. Due to resource limitations setting the window to values greater than 10240 is not recommended.	scalar	Integer32	`.1.3.6.1.4.1.2435.2.4.3.1240.5.2.9`

Child Objects