brpsNetwareFrameType
BROTHER-MIB ·
.1.3.6.1.4.1.2435.2.4.3.1240.5.3.3
Object
scalar
mandatory
r/w
Integer32
The frame type to be used as follows: 0 = Automatic, 1 = Ethernet 802.3, 2 = Ethernet II, 3 = Ethernet 802.2, 4 = Ethernet SNAP.
Context
- MIB
- BROTHER-MIB
- OID
.1.3.6.1.4.1.2435.2.4.3.1240.5.3.3- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- brnetware
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brpsNetwareSupported mandatory 0 indicates the Netware protocol is not supported. 1 indicates Netware
support is implemented by the firmware. 2 indicates that Netware NEST NDS
support is implemented by the firm… | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.1 |
| brpsNDSSupported mandatory 0 indicates NDS is not supported. 1 indicates NDS is implemented
by the firmware | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.10 |
| brpsNetwareEtherIINetInfo mandatory Ethernet II network information. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.11 |
| brpsNetwareEtherIICount mandatory Ethernet II network counter | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.12 |
| brpsNetware8022NetInfo mandatory IEEE 802.2 network information. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.13 |
| brpsNetware8022Count mandatory IEEE 802.2 network counter. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.14 |
| brpsNetware8023NetInfo mandatory IEEE 802.3 network information. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.15 |
| brpsNetware8023Count mandatory IEEE 802.3 network information. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.16 |
| brpsNetwareSNAPNetInfo mandatory SNAP network information. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.17 |
| brpsNetwareSNAPCount mandatory SNAP network count. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.18 |
| brpsNetwareServicingServerName mandatory Netware server name. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.19 |
| brpsNetwareEnable mandatory 0 indicates the Netware protocol is not enabled. 1 indicates that the
Netware protocol is enabled. Writing a non-zero value will enable the
Netware protocol if it is supported by … | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.2 |
| brpsNetwareServicingQueueName mandatory Netware queue name. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.20 |
| brpsNetwareServicingServerCount mandatory Number of netware servers. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.21 |
| brpsNetwareServicingQueueCount mandatory Number of netware queues. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.22 |
| brpsNetwarePrintJob mandatory Number of netware print job. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.23 |
| brpsNetwarePollFreq mandatory File server polling frequency in seconds. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.4 |
| brpsNetwareAdvFreq mandatory Print server advertising frequency in seconds. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.5 |
| brpsNetwarePassword mandatory The Netware login password. | scalar | OctetString | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.6 |
| brpsNetwareRestart mandatory Setting any value will restart the Netware protocol. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.7 |
| brpsNetwareServerTable mandatory This table represents the list of enabled Netware servers.
Up to 16 Netware servers can be enabled. If the service is
configured for remote printer mode, then only the first
enabl… | table | - | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.8 |
| brpsNetwarePasswordSet mandatory Returns 1 if the Netware login password is set, 0 if not set. | scalar | Integer32 | .1.3.6.1.4.1.2435.2.4.3.1240.5.3.9 |