bcsiMplsLspLastTransition
BROCADE-MPLS-MIB ·
.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.10
Object
column
SNMPv2-TCTimeStamp
The time in 10-millisecond units since the last transition occurred on this LSP.
Context
- MIB
- BROCADE-MPLS-MIB
- OID
.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bcsiMplsLspEntry
- Table
- bcsiMplsLspTable
- Siblings
- 37
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bcsiMplsLspSignalingProto MPLS signaling protocol used by this LSP. | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.1 |
| bcsiMplsLspFrom Source IP address of this LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.11 |
| bcsiMplsLspTo Destination IP address of this LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.12 |
| bcsiMplsLspPathName The name of the active path for this LSP, if
any. If there is none, the name should be
empty; in that case, the rest of the fields
in bcsiMplsLspEntry are meaningless. | column | OctetString | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.13 |
| bcsiMplsLspPathType The type of path that is active, i.e., a
primary path, a standby path, or a generic
secondary path. This field is meaningless
unless bcsiMplsLspPathName is not empty | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.14 |
| bcsiMplsLspAdaptive Indicates if the LSP supports adaptive mechanism or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.15 |
| bcsiMplsLspBfdSessionId The BFD session ID associated to this LSP. Zero indicates
there is no BFD session for this LSP. Non-zero value is an
index to an entry in the bfdSessTable | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.16 |
| bcsiMplsLspReoptimizeTimer The number of seconds from the beginning of one reoptimization
attempt to the beginning of the next attempt. | column | Unsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.17 |
| bcsiMplsLspCoS The Class of Service for this LSP. | column | ClassOfService | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.18 |
| bcsiMplsLspHopLimit The number of hops this LSP can traverse. | column | Unsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.19 |
| bcsiMplsLspIndex The unique index of the LSP in the system for a given signaling protocol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.2 |
| bcsiMplsLspCspf Indicates if CSPF path calculation is enabled
on this LSP. | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.20 |
| bcsiMplsLspCspfTieBreaker The tie-breaker to use for selecting CSPF
equal-cost paths. The value of this variable is
meaningless if the bcsiMplsLspCspf is 'disabled'. | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.21 |
| bcsiMplsLspFrrMode Indicates which protection method is to be used
for Fast Reroute. 'detour' means one-to-one backup
and 'facility' for facility backup. | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.22 |
| bcsiMplsLspFrrSetupPriority The setup priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'. | column | Unsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.23 |
| bcsiMplsLspFrrHoldingPriority The hold priority for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'. | column | Unsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.24 |
| bcsiMplsLspFrrHopLimit The hop limit for MPLS Fast Reroute.
The value of this variable is meaningless if the
bcsiMplsLspFrrMode is 'none'. | column | Unsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.25 |
| bcsiMplsLspFrrBandwidth The bandwidth constraint for MPLS Fast Reroute.
The value 0 means that the detour route uses a
best-effort value for bandwidth.
The value of this variable is meaningless if the
bc… | column | Unsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.26 |
| bcsiMplsLspFrrAdmGrpIncludeAny The administrative group setting that the device
includes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variab… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.27 |
| bcsiMplsLspFrrAdmGrpIncludeAll The administrative group setting that an interface
must be a member of to be considered in a detour
route for the LSP. Any interface that is not a member
of all the groups is elim… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.28 |
| bcsiMplsLspFrrAdmGrpExcludeAny The administrative group setting that the device
excludes any of the interfaces that are members of
the group when calculating detour routes for this LSP.
The value of this variab… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.29 |
| bcsiMplsLspName Name of the Label Switched Path. | column | OctetString | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.3 |
| bcsiMplsLspPathSelectMode Indicates the path selection mode to use.
Auto-select is the default mode. I this mode, the
primary path is always selected to carry traffic when
the primary path has stayed opera… | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30 |
| bcsiMplsLspPathSelectPathname The user-selected pathname when the bcsiMplsLspPathSelectMode
is either 'manual' or 'unconditional'. | column | OctetString | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.31 |
| bcsiMplsLspPathSelectRevertTimer The number of seconds to wait after the primary or selected
path comes up before traffic reverts to that path.
A value of 0 indicates that it will switch immediately
after the cur… | column | Unsigned32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32 |
| bcsiMplsLspShortcutOspfAllowed Indicates that this LSP allows shortcut between nodes in an AS.
OSPF includes the LSP in its SPF calculation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.33 |
| bcsiMplsLspShortcutIsisAllowed Indicates that this LSP allows shortcut through the
network to a destination based on the path's cost (metric).
Traffic is forwarded through this LSP to destinations
within the IS… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.34 |
| bcsiMplsLspShortcutIsisLevel Indicates the level of IS-IS routing enabled on the device.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAllowed is 'false'. | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.35 |
| bcsiMplsLspShortcutIsisAnnounce Indicates that this IS-IS shortcut will be announced or
advertised. The metric to announce is specified by
bcsiMplsLspShortcutIsisAnnounceMetric.
The value of this variable is mea… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.36 |
| bcsiMplsLspShortcutIsisAnnounceMetric Indicates the metric value to announce for this shortcut.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAnnounce is 'false'. Default value is 10. | column | Integer32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.37 |
| bcsiMplsLspShortcutIsisRelativeMetric Indicates the relative metric used to compute the LSP cost
when announce is not enabled.
The value of this variable is meaningless if the
bcsiMplsLspShortcutIsisAllowed is 'false'. | column | Integer32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.38 |
| bcsiMplsLspState The operational state of the LSP. | column | Enumeration | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.4 |
| bcsiMplsLspPackets The number of egress Layer-3 VPN and IPoMPLS packets
meeting the in-label and tunnel criteria. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.5 |
| bcsiMplsLspAge The age, since creation of this LSP in 10-millisecond periods. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.6 |
| bcsiMplsLspTimeUp The total time in 10-millisecond units that this
LSP has been operational. The percentage up time
can be determined by computing
(bcsiMplsLspTimeUp/bcsiMplsLspAge * 100 %). | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.7 |
| bcsiMplsLspPrimaryTimeUp The total time in 10-millisecond units that this
LSP's primary path has been operational. The
percentage contribution of the primary
path to the operational time is given by
(bcsi… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.8 |
| bcsiMplsLspTransitions The number of state transitions (up -> down and
down -> up) this LSP has undergone. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.9 |