bcsiMplsLspFrrMode

BROCADE-MPLS-MIB · .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.22
MIB view Table view

Object

column Enumeration 
Indicates which protection method is to be used
for Fast Reroute. 'detour' means one-to-one backup
and 'facility' for facility backup.

Context

MIB
BROCADE-MPLS-MIB
OID
.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.22
Type
column
Access
readonly
Status
current
Parent
bcsiMplsLspEntry
Table
bcsiMplsLspTable
Siblings
37

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2detour
3facility

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bcsiMplsLspSignalingProto
MPLS signaling protocol used by this LSP.
columnEnumeration.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.1
bcsiMplsLspLastTransition
The time in 10-millisecond units since the last transition occurred on this LSP.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.10
bcsiMplsLspFrom
Source IP address of this LSP.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.11
bcsiMplsLspTo
Destination IP address of this LSP.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.12
bcsiMplsLspPathName
The name of the active path for this LSP, if any. If there is none, the name should be empty; in that case, the rest of the fields in bcsiMplsLspEntry are meaningless.
columnOctetString.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.13
bcsiMplsLspPathType
The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless bcsiMplsLspPathName is not empty
columnEnumeration.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.14
bcsiMplsLspAdaptive
Indicates if the LSP supports adaptive mechanism or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.15
bcsiMplsLspBfdSessionId
The BFD session ID associated to this LSP. Zero indicates there is no BFD session for this LSP. Non-zero value is an index to an entry in the bfdSessTable
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.16
bcsiMplsLspReoptimizeTimer
The number of seconds from the beginning of one reoptimization attempt to the beginning of the next attempt.
columnUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.17
bcsiMplsLspCoS
The Class of Service for this LSP.
columnClassOfService.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.18
bcsiMplsLspHopLimit
The number of hops this LSP can traverse.
columnUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.19
bcsiMplsLspIndex
The unique index of the LSP in the system for a given signaling protocol.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.2
bcsiMplsLspCspf
Indicates if CSPF path calculation is enabled on this LSP.
columnEnumeration.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.20
bcsiMplsLspCspfTieBreaker
The tie-breaker to use for selecting CSPF equal-cost paths. The value of this variable is meaningless if the bcsiMplsLspCspf is 'disabled'.
columnEnumeration.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.21
bcsiMplsLspFrrSetupPriority
The setup priority for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.
columnUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.23
bcsiMplsLspFrrHoldingPriority
The hold priority for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.
columnUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.24
bcsiMplsLspFrrHopLimit
The hop limit for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.
columnUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.25
bcsiMplsLspFrrBandwidth
The bandwidth constraint for MPLS Fast Reroute. The value 0 means that the detour route uses a best-effort value for bandwidth. The value of this variable is meaningless if the bc…
columnUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.26
bcsiMplsLspFrrAdmGrpIncludeAny
The administrative group setting that the device includes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variab…
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.27
bcsiMplsLspFrrAdmGrpIncludeAll
The administrative group setting that an interface must be a member of to be considered in a detour route for the LSP. Any interface that is not a member of all the groups is elim…
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.28
bcsiMplsLspFrrAdmGrpExcludeAny
The administrative group setting that the device excludes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variab…
columnMPLS-TC-STD-MIBMplsTunnelAffinity.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.29
bcsiMplsLspName
Name of the Label Switched Path.
columnOctetString.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.3
bcsiMplsLspPathSelectMode
Indicates the path selection mode to use. Auto-select is the default mode. I this mode, the primary path is always selected to carry traffic when the primary path has stayed opera…
columnEnumeration.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30
bcsiMplsLspPathSelectPathname
The user-selected pathname when the bcsiMplsLspPathSelectMode is either 'manual' or 'unconditional'.
columnOctetString.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.31
bcsiMplsLspPathSelectRevertTimer
The number of seconds to wait after the primary or selected path comes up before traffic reverts to that path. A value of 0 indicates that it will switch immediately after the cur…
columnUnsigned32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32
bcsiMplsLspShortcutOspfAllowed
Indicates that this LSP allows shortcut between nodes in an AS. OSPF includes the LSP in its SPF calculation.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.33
bcsiMplsLspShortcutIsisAllowed
Indicates that this LSP allows shortcut through the network to a destination based on the path's cost (metric). Traffic is forwarded through this LSP to destinations within the IS…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.34
bcsiMplsLspShortcutIsisLevel
Indicates the level of IS-IS routing enabled on the device. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'.
columnEnumeration.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.35
bcsiMplsLspShortcutIsisAnnounce
Indicates that this IS-IS shortcut will be announced or advertised. The metric to announce is specified by bcsiMplsLspShortcutIsisAnnounceMetric. The value of this variable is mea…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.36
bcsiMplsLspShortcutIsisAnnounceMetric
Indicates the metric value to announce for this shortcut. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAnnounce is 'false'. Default value is 10.
columnInteger32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.37
bcsiMplsLspShortcutIsisRelativeMetric
Indicates the relative metric used to compute the LSP cost when announce is not enabled. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'.
columnInteger32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.38
bcsiMplsLspState
The operational state of the LSP.
columnEnumeration.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.4
bcsiMplsLspPackets
The number of egress Layer-3 VPN and IPoMPLS packets meeting the in-label and tunnel criteria.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.5
bcsiMplsLspAge
The age, since creation of this LSP in 10-millisecond periods.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.6
bcsiMplsLspTimeUp
The total time in 10-millisecond units that this LSP has been operational. The percentage up time can be determined by computing (bcsiMplsLspTimeUp/bcsiMplsLspAge * 100 %).
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.7
bcsiMplsLspPrimaryTimeUp
The total time in 10-millisecond units that this LSP's primary path has been operational. The percentage contribution of the primary path to the operational time is given by (bcsi…
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.8
bcsiMplsLspTransitions
The number of state transitions (up -> down and down -> up) this LSP has undergone.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.3.1.10.1.2.3.1.9